Citation: | Cao Yu, Zhang Zuoguang, Zhao Weijuanet al. Mobility behavior for driving bubble traversing constricted capillary tubes[J]. Journal of Beijing University of Aeronautics and Astronautics, 2006, 32(07): 847-851. (in Chinese) |
[1] 盛磊.纤维复合材料中孔隙的起因评述[J].航天返回与遥感,1996,17(2):42-53 Sheng Lei. An overview of causes on porosity in fiber composites[J]. Spacecraft Recovery & Remote Sensing,1996,17(2):42-53(in Chinese) [2] Boey F Y C,Lye S W. Void reduction in autoclave processing of thermoset composites part 1:high pressure effects on void reduction[J]. Composties,1992,23(4):261-265 [3] 李辰砂,冷劲松,杜善义,等.纤维增强层合复合材料固化过程的研究[J].纤维复合材料,1999(1):1-6 Li Chensha,Leng Jingsong,Du Shanyi,et al.Study on curing process of fiber reinforced composite laminates[J].Fiber Composits,1999(1):1-6(in Chinese) [4] Kardos J L,Dave R,Dudukovic M P. Voids in composites[J]. Polymer Engineering and Science,1981,21(9):518-533 [5] Loos A C,Springer G S. Curing of epoxy matrix composites[J]. Journal of Composite Materials,1983(17):135-169 [6] Wood J R,Bader M G . Void control for polymer-matrix composites (1):theoretical and experimental methods for determining the growth and collapse of gas bubbles[J]. Composites Manufacturing,1994,5(3):139-147 [7] Patel N,Rohatgi V,Lee L J. Micro scale flow behavior and void formation mechanism during impregnation through a unidirectional stitched fiberglass mat[J]. Polymer Engineering and Science,1995,35(10):837-851 [8] Patel N,Lee L J. Modeling of void formation and removal in liquid composite molding part Ⅱ:model development and implementation[J].Polymer Composites,1996,17(1):104-114 [9] Lundstrm T S. Bubble transport through constricted capillary tubes with application to resin transfer molding[J]. Polymer Composites,1996,17(6):770-779 [10] 郭烈锦.两相与多相流动力学[M].西安:西安交通大学出版社,2000:378-379 Guo Liejin. Two-phase and multiphase dynamics [M]. Xi′an:Xi′an Jiaotong University Press, 2000:378-379(in Chinese) [11] 张远君.两相流体动力学[M].北京:北京航空学院出版社,1987:349-350 Zhang Yuanjun. Two-fluid hydrodynamic[M].Beijing:Beijing Aeronautics Institute Press,1987:349-350(in Chinese) [12] José B,David Q. Rise of liquids and bubbles in angular capillary tubes[J]. Journal of Colloid and Interface Science, 2002(247):162-166
|
[1] | NI Chengzhi, LUO Haitao, LI Yuxin, LI Huadong, PEI Yucheng, ZHENG Peng. Active vibration suppression of MFC-driven deployable composite cylindrical shells[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2025.0181 |
[2] | WU Chengwei, BU Fanqiang, WANG Xingguo, SHI Yan, LI Xiaogao, SHEN Guolang. Laser ultrasonic techniques for the detection of interfacial delamination and debonding in multilayered composites: A review[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2025.0260 |
[3] | WANG C S,ZHANG X Y,ZHAN Z X,et al. Analysis of compression stability and load capacity of thick composite plate structures[J]. Journal of Beijing University of Aeronautics and Astronautics,2025,51(1):94-101 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0991. |
[4] | PIAN Rong, YANG Fan, ZHANG Ling, LIU Feng-rui, WANG Lin-juan, ZHAO Li-bin. Failure mode study of composite laminated plates under compression-shear loading[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0084 |
[5] | LU Ming-yu, ZHANG Ming, WEI Yu-xuan, LI Bo, CUI Zhi-gang, ZHANG Kai-hu. Characteristics and Homogenization Removal Methods of Ultraviolet Femtosecond Laser Processing of Aerospace AFRP Composite Materials[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0096 |
[6] | GENG Z T,ZHAO J Q. Design and development of virtual simulation experiment software of composite piezoelectric materials[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(11):3377-3381 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0826. |
[7] | YANG Z G,KE Z S,YANG X W,et al. Analysis of effect of construction process on electrical properties of composite skins[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(10):3013-3020 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0763. |
[8] | XU M R,ZENG B Y,XIONG X,et al. Tensile fatigue properties of carbon fiber laminates in hygrothermal environments[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(7):1614-1622 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0565. |
[9] | XIAO Yao, LI Yong, LI Dong-sheng, WANG Lei, JIANG Chao. Influence analysis of curing stress and stress relaxation on profile accuracy of carbon fiber reinforced composites tools[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023-0109 |
[10] | LI Xing, LI Zeng-shan, DENG Fan-chen, NIE Lei, ZHANG Tian. Sub-model Based Failure Analysis of Composite Hybrid Joint Structure[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0555 |
[11] | DONG H M,LI X G,MA X Q,et al. Research progress in mechanically fastened polymer-matrix composite joints with protruding-head bolts[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(4):745-760 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0682. |
[12] | WANG L Y,CHEN W H,JIANG Y S,et al. Measurement of ejection factor of new resin matrix composites[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(11):2960-2967 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0056. |
[13] | CHEN S Z,LI D C,XIANG J W. Design optimization of tow-steered composite structure targeting on manufacturing cost[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(9):2423-2431 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0677. |
[14] | LI T S,WANG S K,WU Q,et al. Interface adjustment of aerospace-grade T800 carbon fiber composite material[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(8):2011-2020 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0619. |
[15] | YANG Hui, FAN Shuoshuo, WANG Yan, LIU Rongqiang, XIAO Hong. Stiffness optimization of M-shaped boom based on radial basis function surrogate model[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(11): 2121-2129. doi: 10.13700/j.bh.1001-5965.2021.0091 |
[16] | WANG Rong, YU Yalin, WANG Lechen, MO Shenzhong, HUANG Yuqing, ZHOU Xiang. Effects of prepreg ambient-temperature storage life on mechanical properties of MT700/603 composites[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(12): 2434-2441. doi: 10.13700/j.bh.1001-5965.2021.0121 |
[17] | CUI Jianguo, XU Lingyu, YU Mingyue, JIANG Liying, WANG Jinglin, LIN Zeli. Health state prediction technique for aircraft wing based on MEMD and ELM[J]. Journal of Beijing University of Aeronautics and Astronautics, 2017, 43(8): 1501-1508. doi: 10.13700/j.bh.1001-5965.2016.0610 |
[18] | Xu Menghui, Qiu Zhiping. Interval analysis and optimization for free vibration of all-composite lattice truss core sandwich beam[J]. Journal of Beijing University of Aeronautics and Astronautics, 2013, 39(8): 1079-1085. |
[19] | Yuan Kaihua, Qiu Zhiping. Flutter control of composite panels with embedded piezoelectric materials[J]. Journal of Beijing University of Aeronautics and Astronautics, 2009, 35(12): 1429-1433. |
[20] | Zeng Jia, Shen Gongzhang, Xia Jie, Yang Lingyu. Cooperative trajectory planning for UAV towards moving target aground[J]. Journal of Beijing University of Aeronautics and Astronautics, 2009, 35(7): 887-890. |