Citation: | Lu Zixing, Liu Zixian. Elastic properties for 3 dimensional and 5 directional braided composites[J]. Journal of Beijing University of Aeronautics and Astronautics, 2006, 32(04): 455-460. (in Chinese) |
[1] 卢子兴, 杨振宇, 李仲平. 三维编织复合材料力学行为研究进展[J]. 复合材料学报. 2004,21(2):1~7Lu Zixing, Yang Zhenyu, Li Zhongping. Development of investigation into mechanical behavior of three dimensional braided composites[J]. Acta Mater Comp Sinica, 2004,21(2):1~7(in Chinese) [2]Wu D L. Threecell model and 5D braided structural composites[J]. Composites Science and Technology, 1996,56:225~233 [3]李典森, 陈 利, 李嘉禄. 三维五向编织复合材料的细观结构分析[J]. 天津工业大学学报, 2003,22(6):7~11Li Diansen, Chen Li, Li Jialu. Microstructure analysis of 3dimensional 5directional braided composites[J]. Journal of Tianjin Polytechnic University,2003,22(6):7~11(in Chinese) [4]李学明, 李嘉禄, 王 峥. 三维五向编织结构对复合材料性能的影响[J].天津纺织工学院学报,1997,16(5):7~13Li Xueming, Li Jialu, Wang Zheng. Effect of 3D & 5D braiding structure on mechanical properties of the composite[J]. Journal of Tianjin Institute of Textile Science and Technology, 1997,16(5):7~13(in Chinese) [5]郑锡涛,郭稳学,盛国柱, 等. 三维编织复合材料力学性能试验研究[A].见:王玉林主编. 复合材料生命、环境与高技术[C].天津:天津大学出版社,2002.1108~1111Zheng Xitao, Guo Wenxue, Sheng Guozhu,et al. An experimental investigation on the mechanical behavior of 3D braided composites[A]. In:Wang Yulin ed. CompositesLife, Environment and High Technology[C]. Tianjin:Publishers of Tianjin University, 2002.1108~1111(in Chinese) [6]杨振宇, 卢子兴. 三维四向编织复合材料弹性性能的理论预测[J].复合材料学报,2004,21(2):134~141Yang Zhenyu, Lu Zixing. Theoretical prediction of the elastic properties of threedimensional and fourdirectional braided composites[J]. Acta Mater Comp Sinica, 2004,21(2):134~141(in Chinese) [7]蒋咏秋, 陆逢升, 顾志建. 复合材料力学[M].西安:西安交通大学出版社,1990Jiang Yongqiu, Lu Fengsheng, Gu Zhijian. Mechanics of composite[M]. Xi’an:Xi’an Jiaotong University Press, 1990(in Chinese) [8]杨振宇.三维编织复合材料弹性性能研究[D].北京:北京航空航天大学航空科学与工程学院,2004 Yang Zhenyu. Investigation into the elastic properties of 3D braided composites[D]. Beijing:School of Aeronautic Science and Technology, Beijing University of Aeronautics and Astronautics, 2004(in Chinese) [9]卢子兴, 冯志海, 寇长河, 等.编织复合材料拉伸力学性能的研究[J]. 复合材料学报,1999,16(3):129~134Lu Zixing, Feng Zhihai, Kou Changhe,et al. Studies on tensile properties of braided structural composite materials[J]. Acta Mater Comp Sinica, 1999,16(3):129~134(in Chinese)
|
[1] | WANG C S,ZHANG X Y,ZHAN Z X,et al. Analysis of compression stability and load capacity of thick composite plate structures[J]. Journal of Beijing University of Aeronautics and Astronautics,2025,51(1):94-101 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0991. |
[2] | GENG Z T,ZHAO J Q. Design and development of virtual simulation experiment software of composite piezoelectric materials[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(11):3377-3381 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0826. |
[3] | XIA J Y,ZHOU Z,WANG Z P,et al. Three-dimensional transition corridor of tilt-propulsion UAV[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(3):886-895 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0284. |
[4] | ZHAO J C,LOU C Y,MIAO J G,et al. 3D imaging method based on scanning rotation synchronous motion[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(3):796-802 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0266. |
[5] | DENG J X,CHEN L,LU S T,et al. Damage distribution of composite structures of a certain type aircraft[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(3):920-930 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0379. |
[6] | CHENG M H,LI W G,WANG Z. Identification method of ablation performance parameters of carbonized materials[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(4):1384-1391 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0474. |
[7] | LI Keyu, YANG Chao, WANG Xiaozhe, WAN Zhiqiang, LI Chang. Aeroelastic optimization of wing structure and material using multiple microstructures[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0178 |
[8] | PIAN Rong, YANG Fan, ZHANG Ling, LIU Feng-rui, WANG Lin-juan, ZHAO Li-bin. Failure mode study of composite laminated plates under compression-shear loading[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0084 |
[9] | LU Ming-yu, ZHANG Ming, WEI Yu-xuan, LI Bo, CUI Zhi-gang, ZHANG Kai-hu. Characteristics and Homogenization Removal Methods of Ultraviolet Femtosecond Laser Processing of Aerospace AFRP Composite Materials[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0096 |
[10] | YANG Z G,KE Z S,YANG X W,et al. Analysis of effect of construction process on electrical properties of composite skins[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(10):3013-3020 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0763. |
[11] | PAN D,ZHENG J H,GAO D. Fast 3D path planning of UAV based on 2D connected graph[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(12):3419-3431 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0147. |
[12] | XIAO Yao, LI Yong, LI Dong-sheng, WANG Lei, JIANG Chao. Influence analysis of curing stress and stress relaxation on profile accuracy of carbon fiber reinforced composites tools[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023-0109 |
[13] | LI Xing, LI Zeng-shan, DENG Fan-chen, NIE Lei, ZHANG Tian. Sub-model Based Failure Analysis of Composite Hybrid Joint Structure[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0555 |
[14] | DONG H M,LI X G,MA X Q,et al. Research progress in mechanically fastened polymer-matrix composite joints with protruding-head bolts[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(4):745-760 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0682. |
[15] | WANG L Y,CHEN W H,JIANG Y S,et al. Measurement of ejection factor of new resin matrix composites[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(11):2960-2967 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0056. |
[16] | YANG Zhan-gang, WEI Yu-hao, SHI Xu-dong. Electrical Properties Analysis of Composite Skin Bonding Structures[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0507 |
[17] | CHEN S Z,LI D C,XIANG J W. Design optimization of tow-steered composite structure targeting on manufacturing cost[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(9):2423-2431 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0677. |
[18] | WANG Shaoping, CHEN Rentong, ZHANG Chao. Reliability estimation for aircraft hydraulic pump based on bivariate performance degradation analysis[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(9): 1613-1623. doi: 10.13700/j.bh.1001-5965.2022.0297 |
[19] | WANG Rong, YU Yalin, WANG Lechen, MO Shenzhong, HUANG Yuqing, ZHOU Xiang. Effects of prepreg ambient-temperature storage life on mechanical properties of MT700/603 composites[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(12): 2434-2441. doi: 10.13700/j.bh.1001-5965.2021.0121 |
[20] | YANG Zhan-gang, KE Zhong-shu, YANG Xu-wei, BAO Xing-wang. Analysis of the influence of finishing process on the electrical properties of composite skin[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2022-0763 |