Deng Rui, Li Min, Zhang Zuoguang, et al. Surface free energy of basalt and glass fibers by contact angle method[J]. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(11): 1349-1352. (in Chinese)
Citation: Wang Huanqing, Wu Zheet al. Experiment on influence of machining on transmission properties of frequency selective surfaces[J]. Journal of Beijing University of Aeronautics and Astronautics, 2006, 32(06): 713-715. (in Chinese)

Experiment on influence of machining on transmission properties of frequency selective surfaces

  • Received Date: 28 Apr 2005
  • Publish Date: 30 Jun 2006
  • The machining technics affect the resonant frequency and transmission ratio of FSS (frequency selective surface). Effects on the transmission properties of FSS were explored by experiments to the machining method, surface conductivity and additional conductive coating under the same condition respectively, based on planar FSS of finite extent and PNA 8363B test system. The experimental results show that the resonant frequency of planar FSS is moved by the machining method, the edge burr of FSS cell may effect the property, and may also effect the transmission ratio for different incidence angles. FSS surface conductivity also effects transmission ratio of planar FSS, transmission ratio reduces with the increase of sheet resistance value. The transmission properties are hardly changed by the additional conductive coating.

     

  • [1] Munk B A. Frequency selective surfaces:theory and design[M]. New York:John Wiley,2000 [2] Vardaxoglou J C. Frequency selective surfaces:analysis and design[M]. New York:John Wiley,1997 [3] 吕明云,祝明,王焕青,等. 复杂空间曲面FSS加工系统研究[J]. 航空学报, 2005,26(4):524-527 Lü Mingyun, Zhu Ming, Wang Huanqing, et al. Digital machining system of complex curved-surface FSS[J]. Acta Aeronautica et Astronautica Sinica, 2005,26(4):524-527(in Chinese)
  • Relative Articles

    [1]WEI H,CAI G B,FAN Y H,et al. Online guidance for hypersonic vehicles in glide-reentry segment[J]. Journal of Beijing University of Aeronautics and Astronautics,2025,51(1):183-192 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0965.
    [2]XU Zhiqiang, GUO Yudong, ZHANG Wenqiang, LIU Yatong, LI Ang, WANG Anni. Research on aerodynamic flow field characteristics of guide-injected icing detector[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0767
    [3]YANG B C,HAN J F. Optimization of key parameters of electromagnetic coil launching based on uniform design experimentation[J]. Journal of Beijing University of Aeronautics and Astronautics,2025,51(2):440-445 (in Chinese). doi: 10.13700/j.bh.1001-5965.2023.0040.
    [4]SHI C P,HE H F,HE Y M,et al. Joint estimation of DOA and polarization parameters based on uniform circle array with vector sensor[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(4):1325-1335 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0390.
    [5]LIU X,WANG Z Y,WANG X Y. Optimization three-vector-based model predictive current control for permanent magnet toroidal motor[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(11):3297-3309 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0833.
    [6]GE Jian-hao, GUO Jie, WANG Hao-ning, ZHANG Bao-chao, WAN Yang-yang, TANG Sheng-jing. Adaptive model predictive control for hypersonic morphing gliding vehicle[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0081
    [7]MENG Z P,YANG L Q,WANG B,et al. ADRC design for folding wing vehicles based on improved equilibrium optimization algorithm[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(8):2449-2460 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0698.
    [8]YANG Gong-peng, ZHOU Zheng-gan, MA Teng-fei, WANG Jun, LI Yang, ZHOU Wen-bin. Research on finite element simulation modeling for ultrasonic testing of coarse-grained materials[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0676
    [9]YUAN Y,LIU J,YU J Q,et al. Aerodynamic layout optimization design of high-speed folding-wing vehicles[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(11):3410-3416 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0849.
    [10]PANG Wei-kun, WANG Wei-jie, FAN Ya-hong, LI Lei, YANG Yang, ZHU Hong-ye. Design and analysis of double magnetic circuit rotating Lorentz force magnetic bearing[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0763
    [11]DAI W,SHI S Z,FU Y C,et al. Numerical study on flow and heat transfer of supercritical carbon dioxide under non-uniform heat flux influences[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(10):3074-3083 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0769.
    [12]CHEN S Z,LI D C,XIANG J W. Design optimization of tow-steered composite structure targeting on manufacturing cost[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(9):2423-2431 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0677.
    [13]ZHANG X W,ZHANG M,YU D Y,et al. Analysis of influence of ultrasonic drilling structure parameters on output characteristics[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(7):1735-1742 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0554.
    [14]WANG Chi, LIU Wei, GAO Yang. Three convexification-based guidance methods for six-degree-of-freedom powered descent problems[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0235
    [15]WANG Y H,LU Y N,LI H W,et al. Influence and criterion of buoyancy force on heat transfer of supercritical CO2 in a vertical helical tube[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(11):2929-2937 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0024.
    [16]CHEN R H,LUO J,HU A Y,et al. Uniform circular multiphase modulation correlation radiometer and its sensitivity analysis[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(7):1857-1863 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0560.
    [17]SHANG S F,YANG X N,YANG Y,et al. Secondary electron multiplication of aluminum under strong vacuum electromagnetic field[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(7):1606-1613 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0514.
    [18]HAO Dong, LIU Jian-xia, SU Jie, HE Yuan-yuan. Optimization of multilayer thermal insulation structure for high-speed aircraft considering material optimization[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0261
    [19]FAN B X,CHEN G M,CAO Y Q. Multi-objective optimization of aerodynamic layout for hypersonic reentry vehicle[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(7):1639-1650 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0566.
    [20]SUN M M,GENG H,HU J,et al. Discharge model of divergent magnetic field ion thruster of 10 cm diameter[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(9):2258-2266 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0648.
  • Cited by

    Periodical cited type(5)

    1. 王纳,郭亚娟,张萌萌,王兴渝. 复杂异质路网道路阻抗函数建模研究现状综述. 公路交通技术. 2024(05): 176-183 .
    2. 孙宁,吴伟豪,赵风财,肖广兵. 基于增强型Dijkstra算法的无信号灯交叉路口智能车辆调度研究. 计算机应用研究. 2022(01): 188-193 .
    3. 刘智萍,周清华,彭吉琼,杨真. 基于免疫遗传优化的实时交通路径诱导方法. 计算机仿真. 2022(02): 98-101+418 .
    4. 张才明,刘志华. 遗传算法融合大数据的目标车辆路径规划方法. 微电子学与计算机. 2020(06): 89-92 .
    5. 谢博宇,李茂青,岳丽丽,陈启香. 无人机-智能车队协同路径实时规划研究. 计算机工程与应用. 2020(20): 20-27 .

    Other cited types(6)

  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views(3220) PDF downloads(775) Cited by(11)
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return