Advanced Search
Volume 42 Issue 11
Nov.  2016
Turn off MathJax
Article Contents
Abstract
References
Journal of Beijing University of Aeronautics and Astronautics  > 2016  >  42(11): 2488-2494.
ZHANG Yu, ZHU Ying, GUO Wei, et al. Microstructure and properties of ceramic/stainless steel joint with Ni foam interlayer[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(11): 2488-2494. doi: 10.13700/j.bh.1001-5965.2015.0760(in Chinese)
Citation: ZHANG Yu, ZHU Ying, GUO Wei, et al. Microstructure and properties of ceramic/stainless steel joint with Ni foam interlayer[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(11): 2488-2494. doi: 10.13700/j.bh.1001-5965.2015.0760(in Chinese)
shu

Microstructure and properties of ceramic/stainless steel joint with Ni foam interlayer

doi: 10.13700/j.bh.1001-5965.2015.0760

  • School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

  • Received Date: 19 Nov 2015
  • Rev Recd Date: 28 Jan 2016
  • Publish Date: 20 Nov 2016
    Abstract
  • Al2O3 ceramic and 1Cr18Ni9Ti stainless steel were brazed with or without Ni foam interlayer at the temperature of 850℃ for 60 min at vacuum. The microstructure of the joint was investigated by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), besides shearing tests were used to test the mechanical properties of the joints. The experimental results show that the average shear strength of the joint without Ni foam interlayer is 7.7 MPa, and the fracture occurs in the ceramic. While Ni foam interlayer is used, the average shear strength of the joint is up to 101.7 MPa, and the fracture is located at the interface of ceramic and Ni foam interlayer. Without Ni foam, Ti is mainly distributed at the interface of ceramic and Ag-Cu-Ti and the interface of steel and Ag-Cu-Ti. With Ni foam, element Ti is distributed at the interlayer zone where TiNi3 is formed during the brazing process, besides, the distribution of Ag, Cu, Ti element is more uniform.

     

    • FullText(HTML)
    • References(15)
  • [1]
    路学成,任莹.先进结构陶瓷材料的研究进展[J].佛山陶瓷,2009(1):37-43.LU X C,REN Y.Research progress of advanced structural ceramic[J].Foshan Ceramic,2009(1):37-43(in Chinese).
    [2]
    SONG S H,YOON S E,CHOI J,et al.A high-performance ceramic composite anode for protonic ceramic fuel cells based on lanthanum strontium vanadate[J].International Journal of Hydrogen Energy,2014,39(29):16534-16540.
    [3]
    欧孝玺,张福勤,夏莉红,等.以Nb为中间层AgCuTi为钎料连接炭/炭复合材料与不锈钢[J].粉末冶金材料科学与工程,2011,16(3):442-447.OU X X,ZHANG F Q,XIA L H,et al.Joining of carbon/carbon composite with stainless steel using AgCuTi as brazing alloy and Nb interlayer[J].State Key Laboratory of Powder Metallurgy,2011,16(3):442-447(in Chinese).
    [4]
    JADOON A K,RALPH B,HORNSBY P R.Metal to ceramic joining via a metallic interlayer bonding technique[J].Journal of Materials Processing Technology,2004,152(3):257-265.
    [5]
    HE Y M,ZHANG J,SUN Y,et al.Microstructure and mechanical properties of the Si3N4/42CrMo steel joints brazed with Ag-Cu-Ti+Mo composite filler[J].Journal of the European Ceramic Society,2010,30(15):3245-3251.
    [6]
    HE Y M,ZHANG J,LIU C F,et al.Microstructure and mechanical properties of Si3N4/Si3N4 joint brazed with Ag-Cu-Ti+SiCp composite filler[J].Materials Science and Engineering:A,2010,527(12):2819-2825.
    [7]
    ZHU Y,QI D,GUO W,et al.The braze joint between Al2O3 to 1Cr18Ni9Ti using a nickel foam[J].Welding in the World,2015,59(4):491-496.
    [8]
    SHIRZADI A A,ZHU Y,BHADESHIA H K D H.Joining ceramics to metals using metallic foam[J].Materials Science and Engineering:A,2008,496(1-2):501-506.
    [9]
    PARK J W,EAGAR T W.Strain energy release in ceramic-to-metal joints with patterned interlayers[J].Scripta Materialia,2004,50(4):555-559.
    [10]
    曹立宏,马颖.多孔泡沫金属材料的性能及其应用[J].甘肃科技,2006,22(6):117-119.CAO L H,MA Y.Properties and application of porous metal foam material[J].Gansu Science and Technology,2006,22(6):117-119(in Chinese).
    [11]
    曹国英,王芳,王录才.泡沫金属的力学性能及研究进展[J].铸造设备研究,2008(2):51-54.CAO G Y,WANG F,WANG L C.The mechanical property and progress of metal foams[J].Foundry Equipment Research,2008(2):51-54(in Chinese).
    [12]
    YUE X,HE P,FENG J C,et al.Microstructure and interfacial reactions of vacuum brazing titanium alloy to stainless steel using an AgCuTi filler metal[J].Materials Characterization,2008,59(12):1721-1727.
    [13]
    NOGI K.The role of wettability in metal-ceramic joining[J].Scripta Materialia,2010,62(12):945-948.
    [14]
    KUO D H,YEH K T,SHIUE R K,et al.Joining of Al2O3 to 316SS using braze-infiltrated Ni net[J].ISIJ International,2011,1(6):1017-1019.
    [15]
    张小勇,吕宏,王林山,等.SiC 陶瓷与金属Ta 连接的残余应力[J].中国稀土学报,2003,21(12):98-101.ZHANG X Y,LU H,WANG L S,et al.Calculation of welding residual stress between SiC ceramic and Ta[J].Journal of the Chinese Rare Earth Society,2003,21(12):98-101(in Chinese).
    • Relative Articles

  • Relative Articles

    [1] Volume 1 Issue E-journal[J]. Journal of Beijing University of Aeronautics and Astronautics, 2025, 51(1): .
    [2]Volume 3 Issue E-journal[J]. Journal of Beijing University of Aeronautics and Astronautics, 2025, 51(3): .
    [3]Volume 2 Issue E-journal[J]. Journal of Beijing University of Aeronautics and Astronautics, 2025, 51(2): .
    [4]BU Fanqiang, LIU Yong, WANG Xingguo, LI Xiaogao, SHEN Guolang, MA Chengwen. Ultrasonic transmission testing of the bonding interface curing process in Al-CFRP composite structures[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2025.0007
    [5]Volume 1 Issue E-journal[J]. Journal of Beijing University of Aeronautics and Astronautics, 2024, 50(1): .
    [6]ZHANG Anqi, CAO Ronggang, ZHOU Yu, LI Jiawu, CAO Yuxi, YU Yongbin. Research on Fast and High Precision Signal Processing Method for FM Fuze Based on 2D-FFT and 2D-CFAR[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0827
    [7]WEN Jingyu, TANG Xinmin, TANG Shengjia, GU Junwei, GUAN Xiangmin. Research on the expansion of surveillance capacity for UAT2 data link[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0534
    [8]Volume 2 Issue E-journal [J]. Journal of Beijing University of Aeronautics and Astronautics, 2024, 50(2): .
    [9]Volume 9 Issue E-journal[J]. Journal of Beijing University of Aeronautics and Astronautics, 2024, 50(9): .
    [10]LIU D J，TIAN G，LI Y L，et al. Research on pre-corrosion fatigue properties of 2195 Al-Li alloys in 30% HNO3[J]. Journal of Beijing University of Aeronautics and Astronautics，2024，50（4）：1129-1137 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2022.0445.
    [11]WANG Ming, YANG Chi-hang, ZHANG Hao. Quasi-periodic orbits near 2:1 resonant DRO in the four-body problem[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0061
    [12]ZHANG Y P，BIAN Q，YANG R Z，et al. Evaluation method of H2O penetration depth of drying reactor based on temperature gradient[J]. Journal of Beijing University of Aeronautics and Astronautics，2024，50（10）：3123-3130 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2022.0764.
    [13]ZHANG H，YU Y Z，QIU X T. ORB-SLAM2 algorithm based on improved key frame selection[J]. Journal of Beijing University of Aeronautics and Astronautics，2023，49（1）：45-52 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2021.0173.
    [14]Volume 3 Issue E-journal[J]. Journal of Beijing University of Aeronautics and Astronautics, 2023, 49(3): .
    [15]GAO J C，CHEN W J，HU W J，et al. Analysis of CO2 distribution characteristics in cabin of civil aircraft[J]. Journal of Beijing University of Aeronautics and Astronautics，2023，49（9）：2510-2517 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2021.0683.
    [16]Volume 2 Issue E-journal[J]. Journal of Beijing University of Aeronautics and Astronautics, 2023, 49(2): .
    [17]SHANG S F，YANG X N，YANG Y，et al. Secondary electron multiplication of aluminum under strong vacuum electromagnetic field[J]. Journal of Beijing University of Aeronautics and Astronautics，2023，49（7）：1606-1613 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2021.0514.
    [18]MENG Q L，ZHAO Z M，CHEN X G，et al. Thermal vacuum test study of mechanically pumped two-phase loop for space remote sensor[J]. Journal of Beijing University of Aeronautics and Astronautics，2023，49（3）：559-568 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2021.0270.
    [19]Volume 9 Issue E-journal[J]. Journal of Beijing University of Aeronautics and Astronautics, 2023, 49(9): .
    [20]ZHANG S，HE Y T，NI B，et al. Effect of nitrate on exfoliation corrosion of 2A12-T4 aluminum alloy under full-immersion corrosion condition[J]. Journal of Beijing University of Aeronautics and Astronautics，2023，49（6）：1372-1382 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2021.0473.
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views(822) PDF downloads(403) Cited by()
    Proportional views
    Related

    Copyright © Journal of Beijing University of Aeronautics and Astronautics

    Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@buaa.edu.cn

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return