Advanced Search
Volume 40 Issue 5
May  2014
Turn off MathJax
Article Contents
Journal of Beijing University of Aeronautics and Astronautics  > 2014  >  40(5): 639-643.
Li Wanguo, Fu Yongling, Qi Xiaoyeet al. Full compensation combined control for heater with high heating rate[J]. Journal of Beijing University of Aeronautics and Astronautics, 2014, 40(5): 639-643. doi: 10.13700/j.bh.1001-5965.2013.0573(in Chinese)
Citation: Li Wanguo, Fu Yongling, Qi Xiaoyeet al. Full compensation combined control for heater with high heating rate[J]. Journal of Beijing University of Aeronautics and Astronautics, 2014, 40(5): 639-643. doi: 10.13700/j.bh.1001-5965.2013.0573(in Chinese)
shu

Full compensation combined control for heater with high heating rate

doi: 10.13700/j.bh.1001-5965.2013.0573

  • School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

  • Received Date: 10 Oct 2013
  • Publish Date: 20 May 2014
    Abstract
  • Contact-type conduction electric heater was developed for testing high-temperature material under both heat and pressure. For this heater, temperature control under high heating rate was studied. The specificity of the mathematical mode of general heaters under high heating rate was analyzed, therefore approximately full compensation feedforward-feedback combined control (FCCC) was presented. Corresponding experiments prove the deduced mathematical model. Moreover, comparative experiments of classical PID control and the FCCC were performed. The results show that the FCCC has better tracking performance for temperature curve, better stability and higher ability to restrain head-region of the heating electric power supply. The FCCC is applicable to general heaters, because the deduced mathematical model is suitable for high heating rate operation of general heaters.

     

    • FullText(HTML)
  • loading
    • References(9)
  • [1]
    李金堂,樊润洁. 一种无超调钝角拐点的PID温控设计[J]. 电子设计工程,2010,18(8):82-85 Li Jintang,Fan Runjie.A design of PID temperature control without superscale obtuse angle and inflexion[J].Electronic Design Engineering,2010,18(8):82-85(in Chinese)
    [2]
    Shi D Q, Gao G L,Gao Z W,et al.Application of expert fuzzy PID method for temperature control of heating furnace[J].Procedia Engineering,2012,29:257-261
    [3]
    Hu L, Long W,Nie Z K.Development of PID neural network control system for temperature of resistance furnace[C]//2009 International Forum on Information Technology and Applications.Piscataway,NJ:IEEE Computer Society,2009,3:205-208
    [4]
    吴大方,潘兵, 高镇同,等.超高温、大热流、非线性气动热环境试验模拟及测试技术研究[J].实验力学,2012,27(3):255-271 Wu Dafang,Pan Bing,Gao Zhentong,et al.On the experimental simulation of ultra-high temperature, high heat flux, and nonlinear aerodynamic heating environment and thermal-mechanical testing technique[J].Journal of Experimental Mechanics,2012,27(3):255-271(in Chinese)
    [5]
    Grzesiak L M, Tarczewski T.PMSM servo-drive control system with a state feedback and a load torque feedforward compensation[J].COMPEL-The International Journal for Computation and Mathematics in Electrical and Electronic Engineering,2013, 32(1): 364-382
    [6]
    Seokmin H, Yonghwan O,Doik K,et al.Real-time walking pattern generation method for humanoid robots by combining feedback and feedforward controller[J].IEEE Transactions on Industrial Electronics,2014,61(1):355-364
    [7]
    袁赣南,谭佳琳, 周颋.顺馈-反馈技术在船舶姿态控制中的应用[J].系统仿真学报,2009,21(17):5524-5527 Yuan Gannan,Tan Jialin,Zhou Ting.Application of feedforward-feedback control in control model of ship motion[J].Journal of System Simulation,2009,21(17):5524-5527(in Chinese)
    [8]
    牛国臣,王巍, 魏志强,等.基于力矩前馈和舵机角度补偿的力矩控制[J].北京航空航天大学学报,2013,39(3):300-304 Niu Guochen,Wang Wei,Wei Zhiqiang,et al.Torque control based on torque feedforward and rudder angle compensation[J].Journal of Beijing University of Aeronautics and Astronautics,2013,39(3): 300-304(in Chinese)
    [9]
    敖雯青,王寿增, 张晋.电阻式加热炉温度控制数理模型研究[J].工业炉,2012,34(1):36-39 Ao Wenqing,Wang Shouzeng,Zhang Jin.Study on mathematical model of temperature control of resistance furnace[J].Industrial Furnace,2012,34(1):36-39(in Chinese)
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views(1068) PDF downloads(369) Cited by()
    Proportional views
    Related

    Copyright © Journal of Beijing University of Aeronautics and Astronautics

    Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@buaa.edu.cn

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return