Advanced Search
Volume 42 Issue 11
Nov.  2016
Turn off MathJax
Article Contents
Journal of Beijing University of Aeronautics and Astronautics  > 2016  >  42(11): 2371-2377.
ZHA Guoqing, JING Hailong, CHEN Yunxia, et al. Life analysis method for products based on failure behavior models[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(11): 2371-2377. doi: 10.13700/j.bh.1001-5965.2015.0739(in Chinese)
Citation: ZHA Guoqing, JING Hailong, CHEN Yunxia, et al. Life analysis method for products based on failure behavior models[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(11): 2371-2377. doi: 10.13700/j.bh.1001-5965.2015.0739(in Chinese)
shu

Life analysis method for products based on failure behavior models

doi: 10.13700/j.bh.1001-5965.2015.0739

  • School of Reliability and Systems Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

  • Received Date: 11 Nov 2015
  • Rev Recd Date: 06 Dec 2015
  • Publish Date: 20 Nov 2016
    Abstract
  • With the situation that traditional reliability engineering methods cannot meet the demand of design and analysis for the products with high reliability and long life index, this paper considers the uncertainty of inner and outside factors which cause the life dispersion, and on the basis of product functional models or digital prototype models, with the failure behavior model of products, a method is proposed to conduct the life analysis for products with long life index. The dispersion of inner and outside parameters can be expressed by the probability density function and obtained by analyzing the actual use and production conditions. Thus the life characteristics of products obtained with this method can remedy the disadvantage that the reliability prediction method based on physics of failure cannot reflect the actual normal use conditions of the products.

     

    • FullText(HTML)
  • loading
    • References(16)
  • [1]
    SALEH J H,MARAIS K.Highlights from the early(and pre-) history of reliability engineering[J].Reliability Engineering and System Safety,2006,91(2):249-256.
    [2]
    MCLINN J.A short history of reliability[J].Journal of Reliability Data Analysis Center,2011,54(1):8-15.
    [3]
    MEEKER W Q,ESCOBAR L A.Statistical methods for reliability data[M].Hoboken:John Wiley & Sons,2014:350-420.
    [4]
    ZACKS S.Introduction to reliability analysis:Probability models and statistical methods[M].Berlin:Springer Science & Business Media,2012:100-150.
    [5]
    GNEDENKO B V,BELYAYEV Y K,SOLOVYEV A D.Mathematical methods of reliability theory[M].Manhattan:Academic Press,2014:300-500.
    [6]
    ZHOU T,DONG J B,PENG L X,et al.Designing method research of generalized reliability margin for complex system[C]//IEEE Conference on Prognostics and System Health Management (PHM).Piscataway,NJ:IEEE Press,2012:1-4.
    [7]
    MEEKER W Q,HAMADA M.Statistical tools for the rapid development and evaluation of high-reliability products[J].IEEE Transactions on Reliability,1995,44(2):187-198.
    [8]
    邓爱民.高可靠长寿命产品可靠性技术研究[D].长沙:国防科学技术大学,2006:1-7.DENG A M.Research on reliability technology of high-reliability and long-lifetime products[D].Changsha:National University of Defense Technology,2006:1-7.
    [9]
    陈云霞,赵安,康锐.非电产品寿命分析和试验方法研究[C]//中国运筹学会可靠性分会第九届可靠性学术会议论文集.长沙:中国运筹学会,2013:205-211.CHEN Y X,ZHAO A,KANG R.Research on life analysis and test method for non-electric products[C]//The Reliability of the Operational Research Society of China,the Ninth Session of the Reliability Academic Conference.Changsha:Operations Research Society of China,2013:205-211(in Chinese).
    [10]
    ZENG Z G,CHEN Y X,KANG R.Failure behavior modeling:Towards a better characterization of product failures[J].Chemical Engineering Transactions,2013,33(2):571-576.
    [11]
    ZENG Z G,KANG R,CHEN Y X.A physics-of-failure-based approach for failure behavior modeling:With a focus on failure collaborations[C]//Proceedings of Annual European Safety and Reliability Conference (ESREL2014).Piscataway,NJ:IEEE Press,2014:1-9.
    [12]
    陈云霞.性能与可靠性一体化建模和分析方法研究[D].北京:北京航空航天大学,2004:22-24.CHEN Y X.Study on method of modeling and analysis for integrating performance and reliability[D].Beijing:Beihang University,2004:22-24(in Chinese).
    [13]
    MATHEW S,ALAM M,PECHT M.Identification of failure mechanisms to enhance prognostic outcomes[J].Journal of Failure Analysis and Prevention,2012,12(1):66-73.
    [14]
    CHEN Y X,JING H L,LIAO X,et al Methods to determine stress profile in ALT based on theoretical life models[J].Chinese Journal of Aeronautics,2015,28(3):729-736.
    [15]
    杨振海,程维虎.非均匀随机数产生[J].数理统计与管理,2006,25(6):750-756.YANG Z H,CHENG W H.The common method of generating random number for the non-uniform distribution[J].Jouranl of Applied Statistics and Management,2006,25(6):750-756(in Chinese).
    [16]
    LIAO X,CHEN Y X.Research on the wear life of slipper in aero-hydraulic pump based on Archard wear model and liquid friction work[C]//2013 International Conference on Quality,Reliability,Risk,Maintenance,and Safety Engineering(QR2MSE).Piscataway,NJ:IEEE Press,2013:930-934.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views(800) PDF downloads(590) Cited by()
    Proportional views
    Related

    Copyright © Journal of Beijing University of Aeronautics and Astronautics

    Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@buaa.edu.cn

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return