Volume 43 Issue 9
Sep.  2017
Turn off MathJax
Article Contents
SONG Ningfang, LIU Pengcheng, PAN Xiong, et al. Frequent reset suppression algorithm of digital phase ramp in fiber optic gyroscope[J]. Journal of Beijing University of Aeronautics and Astronautics, 2017, 43(9): 1732-1737. doi: 10.13700/j.bh.1001-5965.2016.0662(in Chinese)
Citation: SONG Ningfang, LIU Pengcheng, PAN Xiong, et al. Frequent reset suppression algorithm of digital phase ramp in fiber optic gyroscope[J]. Journal of Beijing University of Aeronautics and Astronautics, 2017, 43(9): 1732-1737. doi: 10.13700/j.bh.1001-5965.2016.0662(in Chinese)

Frequent reset suppression algorithm of digital phase ramp in fiber optic gyroscope

doi: 10.13700/j.bh.1001-5965.2016.0662
Funds:

National Natural Science Foundation of China 61333005

More Information
  • Corresponding author: SONG Ningfang, E-mail:Songnf@buaa.edu.cn
  • Received Date: 15 Aug 2016
  • Accepted Date: 11 Nov 2016
  • Publish Date: 20 Sep 2017
  • In view of the problem that the digital phase ramp in fiber optic gyroscope resets frequently at the small angular velocity measurement, the reset phase error is modeled under the condition of the gain drift of the modulation chain. Then the mechanism and condition are analyzed for the frequent reset of the digital phase ramp. It is proved that the frequent reset is one of the factors generating the dead band. A hysteresis reset algorithm of the digital ramp is proposed, which has the similar characteristics with the Schmitt trigger. The algorithm suppresses the frequent reset and resulting dead band by means of separating the positive and negative ramp accumulation interval. The experimental results show that the hysteresis reset algorithm can decrease the dead band from three times to one time measurement noise when the modulation gain lessens by 1%.

     

  • loading
  • [1]
    LEFEÈVRE H C.The fiber-optic gyroscope[M].2nd ed.Boston:Artech House, 2014:119-150.
    [2]
    LEFEÈVRE H C, MARTIN P, MORISSE J, et al.High-dynamic-range fiber gyro with all-digital signal processing[C]//Fiber Optic and Laser Sensors Ⅷ.Bellingham, WA:SPIE, 1996, 1367:72-80.
    [3]
    金靖, 宋凝芳, 李立京.干涉型光纤陀螺温度漂移建模与实时补偿[J].航空学报, 2007, 28(6):1449-1454. http://www.cnki.com.cn/Article/CJFDTOTAL-HKXB200706032.htm

    JIN J, SONG N F, LI L J.Temperature drift modeling and real-time compensation of interferometric fiber optic gyroscope[J].Acta Aeronautica et Astronautica Sinica, 2007, 28(6):1449-1454(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-HKXB200706032.htm
    [4]
    王海.光纤陀螺温度影响与误差补偿[J].北京航空航天大学学报, 2007, 33(5):549-551. http://bhxb.buaa.edu.cn/CN/abstract/abstract9555.shtml

    WANG H.Affects of temperature and error compensation for fiber optic gyro[J].Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(5):549-551(in Chinese). http://bhxb.buaa.edu.cn/CN/abstract/abstract9555.shtml
    [5]
    张勇, 李绪友, 王南, 等.高精度数字闭环光纤陀螺的调制增益控制[J].哈尔滨工程大学学报, 2008, 29(11):1172-1175. doi: 10.3969/j.issn.1006-7043.2008.11.006

    ZHANG Y, LI X Y, WANG N, et al.Modulation gain control of high-precision digital closed-loop fiber optic gyroscope[J].Journal of Harbin Engineering University, 2008, 29(11):1172-1175(in Chinese). doi: 10.3969/j.issn.1006-7043.2008.11.006
    [6]
    王妍, 张春熹.带第二反馈回路的全数字闭环光纤陀螺[J].压电与声光, 2005, 27(4):348-351. http://www.cnki.com.cn/Article/CJFDTOTAL-YDSG200504004.htm

    WANG Y, ZHANG C X.All digital closed-loop fiber optic gyroscope with the second feedback loop[J].Piezoelectrics & Acoustooptics, 2005, 27(4):348-351(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-YDSG200504004.htm
    [7]
    MA D Y, SONG N F, SONG J M, et al.The novel arithmetic and realization based on FPGA module design for the real time compensation of the reset error in FOG[C]//The 2nd International Conference on Information Science and Engineering.Piscataway, NJ:IEEE Press, 2010:738-741.
    [8]
    MA D Y, SONG N F, PAN X, et al.Binary code compression algorithm used for the real time compensation of the modulation error in miniaturized FOG[J].Optical Fiber Technology, 2011, 17(4):267-272. doi: 10.1016/j.yofte.2011.04.001
    [9]
    WANG W, WANG J L, ZHAO Z X.Method to control the gain in modulation chain of closed-loop fiber optic gyroscope with periodical biasing modulation[J].Optical Engineering, 2012, 51(6):1-5.
    [10]
    LI H, BI L, LI L J, et al.Tracking algorithm for the gain of the phase modulator in closed-loop optical voltage sensors[J].Optics & Laser Technology, 2013, 47(2013):214-220. http://adsabs.harvard.edu/abs/2013OptLT..47..214H
    [11]
    潘雄, 张春生, 王夏霄, 等.反馈延迟对光纤陀螺振动误差特性的影响[J].红外与激光工程, 2014, 43(8):2607-2612. http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201408035.htm

    PAN X, ZHANG C S, WANG X X, et al.Impact on vibration error characteristics of FOG with feedback delay[J].Infrared and Laser Engineering, 2014, 43(8):2607-2612(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201408035.htm
    [12]
    BIELAS M S.Stochastic and dynamic modeling of fiber gyros[C]//Fiber Optic and Laser Sensors Ⅻ.Bellingham, WA:SPIE, 1994, 2292:240-254.
    [13]
    ZHANG Y G, GAO Z X, WANG G C, et al.Modeling and simulation of the second feedback loop for fiber optic gyroscope[C]//International Symposium on Photoelectronic Detection and Imaging 2013:Fiber Optic Sensors and Optical Coherence Tomography.Bellingham, WA:SPIE, 2013, 8914:1-7.
    [14]
    国防科学技术工业委员会. 光纤陀螺仪测试方法: GJB 2426A-2004[S]. 北京: 国防科工委军标出版发行部, 2004. http://www.doc88.com/p-3899720358953.html

    National Defense Science and Technology Industry Committee.Test methods for fiber optic gyroscope:GJB 2426A-2004[S].Beijing:National Defense Science and Engineering Commission Military Standard Publishing Department, 2004(in Chinese). http://www.doc88.com/p-3899720358953.html
    [15]
    PAVLATH G A.Closed-loop fiber optic gyros[C]//Fiber Optic Gyros:20th Anniversary Conference.Bellingham, WA:SPIE, 1996, 2837:46-60.
    [16]
    余涛, 卿立, 吴衍记.光纤陀螺仪死区的原因分析及误差补偿[J].中国惯性技术学报, 2007, 15(3):363-365. http://www.cnki.com.cn/Article/CJFDTOTAL-ZGXJ200703025.htm

    YU T, QING L, WU Y J.FOG deadband reason analysis and error compensation[J].Journal of Chinese Inertial Technology, 2007, 15(3):363-365(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-ZGXJ200703025.htm
    [17]
    CHONG K H, CHONG K T, KIM Y C.Amplitude control of phase modulation for dithered closed-loop fiber optic gyroscope[J].Journal of the Optical Society of Korea, 2012, 16(4):401-408. doi: 10.3807/JOSK.2012.16.4.401
    [18]
    王巍, 付铁刚.数字闭环光纤陀螺死区机理分析[J].中国惯性技术学报, 2007, 15(1):105-107. http://www.cnki.com.cn/Article/CJFDTOTAL-ZGXJ200701026.htm

    WANG W, FU T G.Analysis on dead-band mechanism of digital closed-loop FOG[J].Journal of Chinese Inertial Technology, 2007, 15(1):105-107(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-ZGXJ200701026.htm
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(11)  / Tables(1)

    Article Metrics

    Article views(814) PDF downloads(601) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return