Citation: | YE Yulong, JIN Jie, LIU Rui, et al. Non-uniform flow characteristics of direct-connected fuel slinger[J]. Journal of Beijing University of Aeronautics and Astronautics, 2019, 45(8): 1560-1568. doi: 10.13700/j.bh.1001-5965.2018.0693(in Chinese) |
Aimed at the flow property in the start-up process of fuel slinger, three-dimensional numerical simulation was used to study the flow property of the inner and outer two-phase flow field of fuel slinger. Combined with the experimental results of high-speed photography and theory, comprehensive analysis was carried out. The results show that the total out mass-flow rate varies with time largely. Each hole's out mass-flow rate is also different to a great extent within short time period. The Sauter mean diameter (SMD) difference for different holes is relatively small compared with the SMD difference caused by rotation rate. The SMD is mainly determined by rotary speed. The spatial distribution of the spray is uneven as the result of different single holes' out mass-flow rate. The experimental results confirm the simulation outcomes.
[1] |
MORISHITA T.A development of the fuel atomizing device utilizing high rotational speed[C]//ASME 1981 International Gas Turbine Conference and Products Show.New York: ASME, 1981: V001T04A007.
|
[2] |
MAZALLON J, DAI Z, FAETH G M.Primary breakup of nonturbulent round liquid jets in gas crossflows[J]. Atomization and Sprays, 1999, 9(3):291-312. doi: 10.1615/AtomizSpr.v9.i3.40
|
[3] |
DAHM W J A, PATEL P R, LERG B H.Visualization and fundamental analysis of liquid atomization by fuel slingers in small gas turbine engines: AIAA-2002-3183[R]. Reston: AIAA, 2002.
|
[4] |
SALLAM K A, AALBURG C, FAETH G M.Breakup of round nonturbulent liquid jets in gaseous crossflow[J]. AIAA Journal, 2004, 42(12):2529-2540. doi: 10.2514/1.3749
|
[5] |
贾永忠.甩油盘的雾化分析[J].推进技术, 1995, 16(4):45-49. http://www.cnki.com.cn/Article/CJFDTOTAL-HKDI201207012.htm
JIA Y Z.An analysis on atomization of fuel slinger[J]. Journal of Propulsion Technology, 1995, 16(4):45-49(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-HKDI201207012.htm
|
[6] |
宋双文, 罗辉.离心甩油盘特性浅析[C]//中国航空学会(动力)第三届小发动机, 中国航空学会(直升机)第三届动力与传动学术讨论会, 2000: 125-133.
SONG S W, LUO H.The characteristics of the slinger injector[C]//The 3rd Small Engine Academic Symposium of Chinese Society of Aeronautics and Astronautics Chinese Society of Aeronautics and Astronautics, 2000: 125-133(in Chinese).
|
[7] |
熊纯, 宋双文, 陈剑, 等.一种离心甩油盘雾化性能的试验[J].航空动力学报, 2012, 27(7):1517-1522. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=hkdlxb201207012
XIONG C, SONG S W, CHEN J, et al.Experimental study of atomization performance on a fuel slinger[J]. Journal of Aerospace Power, 2012, 27(7):1517-1522(in Chinese). http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=hkdlxb201207012
|
[8] |
蒋雪辉.气液2相离心甩油盘设计[J].航空发动机, 2016, 42(2):7-10. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=hkfdj201602002
JIANG X H.Design of a gas-liquid two-phase slinger[J]. Aeroengine, 2016, 42(2):7-10(in Chinese). http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=hkfdj201602002
|
[9] |
WARDLE K E, ALLEN T R, ANDERSON M H, et al.Free surface flow in the mixing zone of an annular centrifugal contactor[J]. AIChE Journal, 2010, 54(1):74-85. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=b2192495c615db242ef4528ab812b5a3
|
[10] |
张健, 方杰, 范波芹.VOF方法理论与应用综述[J].水利水电科技进展, 2005, 25(2):67-70. doi: 10.3880/j.issn.1006-7647.2005.02.019
ZHANG J, FANG J, FAN B Q.Advances in research of VOF method[J]. Advances in Science & Technology of Water Resources, 2005, 25(2):67-70(in Chinese). doi: 10.3880/j.issn.1006-7647.2005.02.019
|
[11] |
黄勇, 林宇震, 樊未军, 等.燃烧与燃烧室[M].北京:北京航空航天大学出版社, 2009.
HUANG Y, LIN Y Z, FAN W J, et al.Combustion and combustor[M]. Beijing:Beihang University Press, 2009(in Chinese).
|
[12] |
王文波, 岳明, 杜春雨, 等.喷嘴损伤对环形回流燃烧室性能的影响[J].航空动力学报, 2017, 32(6):1335-1341. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=hkdlxb201706008
WANG W B, YUE M, DU C Y, et al.Effect of nozzle damage on performance of annular backflow combustor[J]. Journal of Aerospace Power, 2017, 32(6):1335-1341(in Chinese). http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=hkdlxb201706008
|
[13] |
SHIH T H, LIOU W W, SHABBIR A, et al.A new k-epsilon eddy viscosity model for high Reynolds number turbulent flows:Model development and validation[J]. Computers & Fluids, 1995, 24(3):227-238.
|
[14] |
YAKHOT V, ORSZAG S A, THANGAM S, et al.Development of turbulence models for shear flows by a double expansion technique[J]. Physics of Fluids A, 1992, 4(7):1510-1520. doi: 10.1063/1.858424
|
[15] |
HUPPERT H E.Flow and instability of a viscous current down a slope[J]. Nature, 1982, 300(5891):427-429. doi: 10.1038/300427a0
|
[16] |
HARTLEY D E, MURGATROYD W.Criteria for the break-up of thin liquid layers flowing isothermally over solid surfaces[J]. International Journal of Heat and Mass Transfer, 1964, 7(9):1003-1015. doi: 10.1016/0017-9310(64)90042-0
|
[17] |
RUCKENSTEIN E.On the break-up of thin liquid layers flowing along a surface[J]. International Journal of Heat and Mass Transfer, 1971, 14(1):165-169. doi: 10.1016/0017-9310(71)90150-5
|