Advanced Search
Volume 52 Issue 10
Oct.  2026
Turn off MathJax
Article Contents
Journal of Beijing University of Aeronautics and Astronautics  > 2026  >  52(10): 3276-3297.
Zhao L J，Yang S C，Liu G F，et al. Research progress on modeling and simulation of characteristics of all-solid-state batteries[J]. Journal of Beijing University of Aeronautics and Astronautics，2026，52（10）：3276-3297 （in Chinese）
Citation: Zhao L J，Yang S C，Liu G F，et al. Research progress on modeling and simulation of characteristics of all-solid-state batteries[J]. Journal of Beijing University of Aeronautics and Astronautics，2026，52（10）：3276-3297 （in Chinese）
shu

Research progress on modeling and simulation of characteristics of all-solid-state batteries

doi: 10.13700/j.bh.1001-5965.2025.0322
  • 1.

    School of Transportation Science and Engineering，Beihang University，Beijing 100191，China

  • 2.

    China Society of Automotive Engineers，Beijing 100176，China

  • 3.

    College of Mechanical and Vehicle Engineering，Chongqing University，Chongqing 400044，China

Funds:

National Key Research and Development Program of China (2023YFB2408200)

More Information
  • Corresponding author: E-mail：yangshichun@buaa.edu.cn
  • Received Date: 27 May 2025
  • Accepted Date: 25 Sep 2025
    • Available Online: 20 Oct 2025
  • Publish Date: 15 Oct 2025
    Abstract

  • Governments and large automakers worldwide are aggressively investing in and developing all-solid-state batteries (ASSBs) as a next-generation battery technology because of their promise to provide high specific energy and improved safety. However, significant challenges remain in terms of research and development as well as large-scale industrialization. Conducting modeling and simulation studies on ASSBs can help reveal their underlying operational mechanisms and clarify the factors influencing their performance. This, in turn, enables the design of ASSBs that meet targeted specifications and achieve desired operational performance, ultimately shortening the cycles of experimental testing and development. This paper provides a comprehensive review and analysis of modeling and simulation efforts in the areas of molecular dynamics calculations, key materials and interfacial characteristics, and electrochemical performance of ASSBs. Particular emphasis is placed on the microstructural modeling of sulfide-based solid electrolytes, interfacial behavior, ion transport mechanisms, stress generation, and fracture induced by the interphase between electrodes and electrolytes. The study also identifies possible research goals, describes future trends in ASSB modeling and simulation, and attempts to use these insights to hasten the industrialization and practical application of ASSBs.

     

    • FullText(HTML)
  • loading
    • References(144)
  • [1]
    Zhao Q, Stalin S, Zhao C Z, et al. Designing solid-state electrolytes for safe, energy-dense batteries[J]. Nature Reviews Materials, 2020, 5(3): 229-252.
    [2]
    Lindorff-Larsen K, Piana S, Dror R O, et al. How fast-folding proteins fold[J]. Science, 2011, 334(6055): 517-520.
    [3]
    Hertig S, Latorraca N R, Dror R O. Revealing atomic-level mechanisms of protein allostery with molecular dynamics simulations[J]. PLoS Computational Biology, 2016, 12(6): e1004746.
    [4]
    Foroozan T, Soto F A, Yurkiv V, et al. Synergistic effect of graphene oxide for impeding the dendritic plating of Li[J]. Advanced Functional Materials, 2018, 28(15): 1705917.
    [5]
    Deng Z, Wang Z B, Chu I H, et al. Elastic properties of alkali superionic conductor electrolytes from first principles calculations[J]. Journal of the Electrochemical Society, 2016, 163(2): A67-A74.
    [6]
    Ngandjong A C, Rucci A, Maiza M, et al. Multiscale simulation platform linking lithium ion battery electrode fabrication process with performance at the cell level[J]. The Journal of Physical Chemistry Letters, 2017, 8(23): 5966-5972.
    [7]
    Hao F, Mukherjee P P. Mesoscale analysis of the electrolyte-electrode interface in all-solid-state Li-ion batteries[J]. Journal of the Electrochemical Society, 2018, 165(9): A1857-A1864.
    [8]
    Yu H C, Taha D, Thompson T, et al. Deformation and stresses in solid-state composite battery cathodes[J]. Journal of Power Sources, 2019, 440: 227116.
    [9]
    Tian H K, Liu Z, Ji Y Z, et al. Interfacial electronic properties dictate Li dendrite growth in solid electrolytes[J]. Chemistry of Materials, 2019, 31(18): 7351-7359.
    [10]
    Tian H K, Xu B, Qi Y. Computational study of lithium nucleation tendency in Li7La3Zr2O12 (LLZO) and rational design of interlayer materials to prevent lithium dendrites[J]. Journal of Power Sources, 2018, 392: 79-86.
    [11]
    Ahmad Z, Viswanathan V. Quantification of uncertainty in first-principles predicted mechanical properties of solids: application to solid ion conductors[J]. Physical Review B, 2016, 94(6): 064105.
    [12]
    Ahmad Z, Xie T, Maheshwari C, et al. Machine learning enabled computational screening of inorganic solid electrolytes for suppression of dendrite formation in lithium metal anodes[J]. ACS Central Science, 2018, 4(8): 996-1006.
    [13]
    Su S M, Ma J B, Zhao L, et al. Progress and perspective of the cathode/electrolyte interface construction in all-solid-state lithium batteries[J]. Carbon Energy, 2021, 3(6): 866-894.
    [14]
    Liao Y L, Hu J K, Fu Z H, et al. Integrated interface configuration by in-situ interface chemistry enabling uniform lithium deposition in all-solid-state lithium metal batteries[J]. Journal of Energy Chemistry, 2023, 80: 458-465.
    [15]
    Wang A N, Li J, Yi M Y, et al. Stable all-solid-state lithium metal batteries enabled by ultrathin LiF/Li3Sb hybrid interface layer[J]. Energy Storage Materials, 2022, 49: 246-254.
    [16]
    Umeshbabu E, Zheng B Z, Yang Y. Recent progress in all-solid-state Lithium-Sulfur batteries using high Li-ion conductive solid electrolytes[J]. Electrochemical Energy Reviews, 2019, 2(2): 199-230.
    [17]
    Wang Y Z, Zhu G M, Zeglio E, et al. N-type organic electrochemical transistors with high transconductance and stability[J]. Chemistry of Materials, 2023, 35(2): 405-415.
    [18]
    Díez-Pascual A M, Rahdar A. Graphene-based polymer composites for flexible electronic applications[J]. Micromachines, 2022, 13(7): 1123.
    [19]
    Aïssa B, Ali A, El-Mellouhi F. Oxide and organic-inorganic halide perovskites with plasmonics for optoelectronic and energy applications: a contributive review[J]. Catalysts, 2021, 11(9): 1057.
    [20]
    Koerver R, Aygün I, Leichtweiss T, et al. Capacity fade in solid-state batteries: interphase formation and chemomechanical processes in nickel-rich layered oxide cathodes and lithium thiophosphate solid electrolytes[J]. Chemistry of Materials, 2017, 29(13): 5574-5582.
    [21]
    Ferguson T R, Bazant M Z. Nonequilibrium thermodynamics of porous electrodes[J]. Journal of the Electrochemical Society, 2012, 159(12): A1967-A1985.
    [22]
    Renganathan S, Sikha G, Santhanagopalan S, et al. Theoretical analysis of stresses in a lithium ion cell[J]. Journal of the Electrochemical Society, 2010, 157(2): A155.
    [23]
    Christensen J. Modeling diffusion-induced stress in Li-ion cells with porous electrodes[J]. Journal of the Electrochemical Society, 2010, 157(3): A366.
    [24]
    Mykhaylov M, Ganser M, Klinsmann M, et al. An elementary 1-dimensional model for a solid state lithium-ion battery with a single ion conductor electrolyte and a lithium metal negative electrode[J]. Journal of the Mechanics and Physics of Solids, 2019, 123: 207-221.
    [25]
    Zelič K, Katrašnik T, Gaberšček M. Derivation of transmission line model from the concentrated solution theory (CST) for porous electrodes[J]. Journal of the Electrochemical Society, 2021, 168(7): 070543.
    [26]
    Garcia R E, Chiang Y M, Carter W C, et al. Microstructural modeling and design of rechargeable lithium-ion batteries[J]. Journal of the Electrochemical Society, 2005, 152(1): A255.
    [27]
    Xu R, Yang Y, Yin F, et al. Heterogeneous damage in Li-ion batteries: experimental analysis and theoretical modeling[J]. Journal of the Mechanics and Physics of Solids, 2019, 129: 160-183.
    [28]
    Bielefeld A, Weber D A, Janek J. Microstructural modeling of composite cathodes for all-solid-state batteries[J]. The Journal of Physical Chemistry C, 2019, 123(3): 1626-1634.
    [29]
    Purkayastha R, Mcmeeking R. Stress due to the intercalation of lithium in cubic-shaped particles: a parameter study[J]. Meccanica, 2016, 51(12): 3081-3096.
    [30]
    Bucci G, Nadimpalli S P V, Sethuraman V A, et al. Measurement and modeling of the mechanical and electrochemical response of amorphous Si thin film electrodes during cyclic lithiation[J]. Journal of the Mechanics and Physics of Solids, 2014, 62: 276-294.
    [31]
    Lyu D D, Ren B, Li S F. Failure modes and mechanisms for rechargeable lithium-based batteries: a state-of-the-art review[J]. Acta Mechanica, 2019, 230(3): 701-727.
    [32]
    Bucci G, Swamy T, Bishop S, et al. The effect of stress on battery-electrode capacity[J]. Journal of the Electrochemical Society, 2017, 164(4): A645-A654.
    [33]
    Al-Siraj M, Stein P, Xu B X. The effect of morphology changes and mechanical stresses on the effective diffusivity of solid electrolyte for lithium ion batteries[J]. Journal of the Electrochemical Society, 2020, 167(2): 020535.
    [34]
    Bucci G, Swamy T, Chiang Y M, et al. Modeling of internal mechanical failure of all-solid-state batteries during electrochemical cycling, and implications for battery design[J]. Journal of Materials Chemistry A, 2017, 5(36): 19422-19430.
    [35]
    Zhang T, Kamlah M. Mechanically coupled phase-field modeling of microstructure evolution in sodium ion batteries particles of NaxFePO4[J]. Journal of the Electrochemical Society, 2020, 167(2): 020508.
    [36]
    Cogswell D A, Bazant M Z. Size-dependent phase morphologies in LiFePO4 battery particles[J]. Electrochemistry Communications, 2018, 95: 33-37.
    [37]
    Bai P, Cogswell D A, Bazant M Z. Suppression of phase separation in LiFePO4 nanoparticles during battery discharge[J]. Nano Letters, 2011, 11(11): 4890-4896.
    [38]
    Mussa A S, Klett M, Lindbergh G, et al. Effects of external pressure on the performance and ageing of single-layer lithium-ion pouch cells[J]. Journal of Power Sources, 2018, 385: 18-26.
    [39]
    Sauerteig D, Hanselmann N, Arzberger A, et al. Electrochemical-mechanical coupled modeling and parameterization of swelling and ionic transport in lithium-ion batteries[J]. Journal of Power Sources, 2018, 378: 235-247.
    [40]
    Mcconohy G, Xu X, Cui T, et al. Mechanical regulation of lithium intrusion probability in garnet solid electrolytes[J]. Nature Energy, 2023, 8(3): 241-250.
    [41]
    孙富, 刘海君, 倪玲, 等. 锂枝晶的生长理论模型及其抑制方法[J]. 科学通报, 2021, 66(9): 1046-1056.

    Sun F, Liu H J, Ni L, et al. Growth mechanisms of Li dendrite and the suppression strategies[J]. Chinese Science Bulletin, 2021, 66(9): 1046-1056(in Chinese).
    [42]
    Barton J L, Bockris J O. The electrolytic growth of dendrites from ionic solutions[J]. Proceedings of the Royal Society of London Series A, Mathematical and Physical Sciences, 1962, 268(1335): 485-505.
    [43]
    Chazalviel J N. Electrochemical aspects of the generation of ramified metallic electrodeposits[J]. Physical Review A, 1990, 42(12): 7355-7367.
    [44]
    Brissot C, Rosso M, Chazalviel J N, et al. In situ study of dendritic growth inlithium/PEO-salt/lithium cells[J]. Electrochimica Acta, 1998, 43(10-11): 1569-1574.
    [45]
    Monroe C, Newman J. The effect of interfacial deformation on electrodeposition kinetics[J]. Journal of the Electrochemical Society, 2004, 151(6): A880.
    [46]
    Monroe C, Newman J. Dendrite growth in lithium/polymer systems[J]. Journal of the Electrochemical Society, 2003, 150(10): A1377.
    [47]
    Akolkar R. Mathematical model of the dendritic growth during lithium electrodeposition[J]. Journal of Power Sources, 2013, 232: 23-28.
    [48]
    Ganser M, Hildebrand F E, Klinsmann M, et al. An extended formulation of Butler-Volmer electrochemical reaction kinetics including the influence of mechanics[J]. Journal of the Electrochemical Society, 2019, 166(4): H167-H176.
    [49]
    Klinsmann M, Hildebrand F E, Ganser M, et al. Dendritic cracking in solid electrolytes driven by lithium insertion[J]. Journal of Power Sources, 2019, 442: 227226.
    [50]
    Yu S, Siegel D J. Grain boundary softening: a potential mechanism for lithium metal penetration through stiff solid electrolytes[J]. ACS Applied Materials & Interfaces, 2018, 10(44): 38151-38158.
    [51]
    洪清和, 耿晓彬, 徐波, 等. 固态电解质电池的枝晶生长仿真研究[J]. 武汉理工大学学报, 2023, 45(2): 81-87.

    Hong Q H, Geng X B, Xu B, et al. Simulation of dendrite growth in solid electrolyte batteries[J]. Journal of Wuhan University of Technology, 2023, 45(2): 81-87(in Chinese) .
    [52]
    Barai P, Higa K, Srinivasan V. Effect of initial state of lithium on the propensity for dendrite formation: a theoretical study[J]. Journal of the Electrochemical Society, 2017, 164(2): A180-A189.
    [53]
    Natsiavas P P, Weinberg K, Rosato D, et al. Effect of prestress on the stability of electrode-electrolyte interfaces during charging in lithium batteries[J]. Journal of the Mechanics and Physics of Solids, 2016, 95: 92-111.
    [54]
    Ahmad Z, Viswanathan V. Stability of electrodeposition at solid-solid interfaces and implications for metal anodes[J]. Physical Review Letters, 2017, 119(5): 056003.
    [55]
    Ding F, Xu W, Graff G L, et al. Dendrite-free lithium deposition via self-healing electrostatic shield mechanism[J]. Journal of the American Chemical Society, 2013, 135(11): 4450-4456.
    [56]
    Schultz R. Lithium: measurement of Young’s modulus and yield strength: FERMILAB-TM-2191[R]. Batavia: Fermilab, 2002.
    [57]
    Narayan S, Anand L. A large deformation elastic-viscoplastic model for lithium[J]. Extreme Mechanics Letters, 2018, 24: 21-29.
    [58]
    Yang F Q. Modeling analysis for the growth of a Li sphere and Li whisker in a solid-state lithium metal battery[J]. Physical Chemistry Chemical Physics, 2020, 22(24): 13737-13745.
    [59]
    Mcdowell M T, Xia S M, Zhu T. The mechanics of large-volume-change transformations in high-capacity battery materials[J]. Extreme Mechanics Letters, 2016, 9: 480-494.
    [60]
    Anand L. A Cahn-Hilliard-type theory for species diffusion coupled with large elastic-plastic deformations[J]. Journal of the Mechanics and Physics of Solids, 2012, 60(12): 1983-2002.
    [61]
    Bower A F, Guduru P R, Chason E. Analytical solutions for composition and stress in spherical elastic-plastic lithium-ion electrode particles containing a propagating phase boundary[J]. International Journal of Solids and Structures, 2015, 69-70: 328-342.
    [62]
    Huang S, Fan F, Li J, et al. Stress generation during lithiation of high-capacity electrode particles in lithium ion batteries[J]. Acta Materialia, 2013, 61(12): 4354-4364.
    [63]
    Di Leo C V, Rejovitzky E, Anand L. Diffusion-deformation theory for amorphous silicon anodes: the role of plastic deformation on electrochemical performance[J]. International Journal of Solids and Structures, 2015, 67-68: 283-296.
    [64]
    Wu H, Chan G, Choi J W, et al. Stable cycling of double-walled silicon nanotube battery anodes through solid-electrolyte interphase control[J]. Nature Nanotechnology, 2012, 7(5): 310-315.
    [65]
    Zhang X X, Krischok A, Linder C. A variational framework to model diffusion induced large plastic deformation and phase field fracture during initial two-phase lithiation of silicon electrodes[J]. Computer Methods in Applied Mechanics and Engineering, 2016, 312: 51-77.
    [66]
    Wang Y, Richards W D, Ong S P, et al. Design principles for solid-state lithium superionic conductors[J]. Nature Materials, 2015, 14(10): 1026-1031.
    [67]
    Zhou L D, Park K H, Sun X Q, et al. Solvent-engineered design of argyrodite Li6PS5X (X = Cl, Br, I) solid electrolytes with high ionic conductivity[J]. ACS Energy Letters, 2019, 4(1): 265-270.
    [68]
    De Klerk N J J, Rosłoń I, Wagemaker M. Diffusion mechanism of Li argyrodite solid electrolytes for Li-ion batteries and prediction of optimized halogen doping: the effect of Li vacancies, halogens, and halogen disorder[J]. Chemistry of Materials, 2016, 28(21): 7955-7963.
    [69]
    Baktash A, Reid J C, Yuan Q H, et al. Shaping the future of solid-state electrolytes through computational modeling[J]. Advanced Materials, 2020, 32(18): 1908041.
    [70]
    Baktash A, Reid J C, Roman T, et al. Diffusion of lithium ions in lithium-argyrodite solid-state electrolytes[J]. NPJ Computational Materials, 2020, 6: 162.
    [71]
    Yu C, Van Eijck L, Ganapathy S, et al. Synthesis, structure and electrochemical performance of the argyrodite Li6PS5Cl solid electrolyte for Li-ion solid state batteries[J]. Electrochimica Acta, 2016, 215: 93-99.
    [72]
    He P P, Tang Y, Tan Z L, et al. Solid-state batteries encounter challenges regarding the interface involving lithium metal[J]. Nano Energy, 2024, 124: 109502.
    [73]
    Lewis J A, Tippens J, Cortes F J Q, et al. Chemo-mechanical challenges in solid-state batteries[J]. Trends in Chemistry, 2019, 1(9): 845-857.
    [74]
    Wenzel S, Randau S, Leichtweiß T, et al. Direct observation of the interfacial instability of the fast ionic conductor Li10GeP2S12 at the lithium metal anode[J]. Chemistry of Materials, 2016, 28(7): 2400-2407.
    [75]
    Han X G, Gong Y H, Fu K, et al. Negating interfacial impedance in garnet-based solid-state Li metal batteries[J]. Nature Materials, 2017, 16(5): 572-579.
    [76]
    Tsai C L, Roddatis V, Chandran C V, et al. Li7La3Zr2O12 interface modification for Li dendrite prevention[J]. ACS Applied Materials & Interfaces, 2016, 8(16): 10617-10626.
    [77]
    Rana M, Rudel Y, Heuer P, et al. Toward achieving high areal capacity in silicon-based solid-state battery anodes: what influences the rate-performance[J]. ACS Energy Letters, 2023, 8(7): 3196-3203.
    [78]
    郝增辉, 刘训良, 孟缘, 等. 电极界面微观结构对固态锂离子电池性能的影响[J]. 储能科学与技术, 2023, 12(7): 2095-2104.

    Hao Z H, Liu X L, Meng Y, et al. Effect of electrode interface microstructure on the performance of solid-state lithium-ion battery[J]. Energy Storage Science and Technology, 2023, 12(7): 2095-2104(in Chinese) .
    [79]
    Tian H K, Qi Y. Simulation of the effect of contact area loss in all-solid-state Li-ion batteries[J]. Journal of the Electrochemical Society, 2017, 164(11): E3512-E3521.
    [80]
    Javed B, Koyama M. Multi-physics simulation of solid-state batteries with active material coating[J]. Journal of the Electrochemical Society, 2020, 167(2): 020521.
    [81]
    Xiong R Y, Zhou M Y, Li L H, et al. Decoupled measurement and modeling of interface reaction kinetics of ion-intercalation battery electrodes[J]. Energy Storage Materials, 2023, 54: 836-844.
    [82]
    Wang W, Wang J X, Lin C, et al. Modeling of void-mediated cracking and lithium penetration in all-solid-state batteries[J]. Advanced Functional Materials, 2023, 33(41): 2303484.
    [83]
    Muy S, Bachman J C, Giordano L, et al. Tuning mobility and stability of lithium ion conductors based on lattice dynamics[J]. Energy & Environmental Science, 2018, 11(4): 850-859.
    [84]
    Rodger A R, Kuwano J, West A R. Li+ ion conducting γ solid solutions in the systems Li4XO4-Li3YO4: X=Si, Ge, Ti; Y=P, As, V; Li4XO4-LiZO2: Z=Al, Ga, Cr and Li4GeO4-Li2CaGeO4[J]. Solid State Ionics, 1985, 15(3): 185-198.
    [85]
    He X F, Zhu Y Z, Mo Y F. Origin of fast ion diffusion in super-ionic conductors[J]. Nature Communications, 2017, 8: 15893.
    [86]
    张田. 固态电池中电极电解质相关模拟计算[D]. 天津: 天津大学, 2022.

    Zhang T. Correlated simulation calculation of electrode and electrolyte in solid state batteries[D]. Tianjin: Tianjin University, 2022 (in Chinese).
    [87]
    Ren D S, Lu L G, Hua R, et al. Challenges and opportunities of practical sulfide-based all-solid-state batteries[J]. eTransportation, 2023, 18: 100272.
    [88]
    Tikekar M D, Archer L A, Koch D L. Stabilizing electrodeposition in elastic solid electrolytes containing immobilized anions[J]. Science Advances, 2016, 2(7): e1600320.
    [89]
    Mistry A, Mukherjee P P. Molar volume mismatch: a malefactor for irregular metallic electrodeposition with solid electrolytes[J]. Journal of the Electrochemical Society, 2020, 167(8): 082510.
    [90]
    Ganser M, Hildebrand F E, Mcmeeking R M, et al. Stiffer is not necessarily better: requirements analysis for binary solid polymer electrolytes that ensure stable lithium metal electrodes[J]. Journal of the Electrochemical Society, 2020, 167(13): 130525.
    [91]
    Song S S, He F, Xia Q, et al. Research advances in rare-earth-based solid electrolytes for all-solid-state batteries[J]. Small, 2025, 21(23): 2502008.
    [92]
    Zhu X X, Wu J X, Lu J. Insight into inorganic solid-state electrolytes: ionic transport and failure mechanisms[J]. Advanced Functional Materials, 2024, 34(49): 2409547.
    [93]
    Yang S M, Tang Y, Yao Y, et al. Sulfide electrolytes for all-solid-state sodium batteries: fundamentals and modification strategies[J]. Materials Horizons, 2025, 12(4): 1058-1083.
    [94]
    Ganser M, Hildebrand F E, Kamlah M, et al. A finite strain electro-chemo-mechanical theory for ion transport with application to binary solid electrolytes[J]. Journal of the Mechanics and Physics of Solids, 2019, 125: 681-713.
    [95]
    Newman J, Balsara N P. Electrochemical systems[M]. 4th ed. Hoboken: John Wiley & Sons, 2021.
    [96]
    Bucci G, Chiang Y M, Carter W C. Formulation of the coupled electrochemical-mechanical boundary-value problem, with applications to transport of multiple charged species[J]. Acta Materialia, 2016, 104: 33-51.
    [97]
    Tippens J, Miers J C, Afshar A, et al. Visualizing chemomechanical degradation of a solid-state battery electrolyte[J]. ACS Energy Letters, 2019, 4(6): 1475-1483.
    [98]
    Mücke R, Finsterbusch M, Kaghazchi P, et al. Modelling electro-chemical induced stresses in all-solid-state batteries: anisotropy effects in cathodes and cell design optimisation[J]. Journal of Power Sources, 2021, 489: 229430.
    [99]
    Miehe C, Dal H, Schänzel L M, et al. A phase-field model for chemo-mechanical induced fracture in lithium-ion battery electrode particles[J]. International Journal for Numerical Methods in Engineering, 2016, 106(9): 683-711.
    [100]
    Yamakawa S, Nagasako N, Yamasaki H, et al. Phase-field modeling of stress generation in polycrystalline LiCoO2[J]. Solid State Ionics, 2018, 319: 209-217.
    [101]
    Anand L, Mao Y W, Talamini B. On modeling fracture of ferritic steels due to hydrogen embrittlement[J]. Journal of the Mechanics and Physics of Solids, 2019, 122: 280-314.
    [102]
    Shi T, Tu Q, Tian Y, et al. High active material loading in all-solid-state battery electrode via particle size optimization[J]. Advanced Energy Materials, 2020, 10(1): 1902881.
    [103]
    Bucci G, Talamini B, Balakrishna A R, et al. Mechanical instability of electrode-electrolyte interfaces in solid-state batteries[J]. Physical Review Materials, 2018, 2(10): 105407.
    [104]
    Barai P, Rojas T, Narayanan B, et al. Investigation of delamination-induced performance decay at the cathode/LLZO interface[J]. Chemistry of Materials, 2021, 33(14): 5527-5541.
    [105]
    Rezaei S, Asheri A, Xu B X. A consistent framework for chemo-mechanical cohesive fracture and its application in solid-state batteries[J]. Journal of the Mechanics and Physics of Solids, 2021, 157: 104612.
    [106]
    Fathiannasab H, Zhu L K, Chen Z W. Chemo-mechanical modeling of stress evolution in all-solid-state lithium-ion batteries using synchrotron transmission X-ray microscopy tomography[J]. Journal of Power Sources, 2021, 483: 229028.
    [107]
    Wan T H, Ciucci F. Electro-chemo-mechanical modeling of solid-state batteries[J]. Electrochimica Acta, 2020, 331: 135355.
    [108]
    Ke X Y, Wang Y, Ren G F, et al. Towards rational mechanical design of inorganic solid electrolytes for all-solid-state lithium ion batteries[J]. Energy Storage Materials, 2020, 26: 313-324.
    [109]
    Wang Z Q, Wu M S, Liu G, et al. Elastic properties of new solid state electrolyte material Li10GeP2S12: a study from first-principles calculations[J]. International Journal of Electrochemical Science, 2014, 9(2): 562-568.
    [110]
    Yang Y H, Wu Q, Cui Y H, et al. Elastic properties, defect thermodynamics, electrochemical window, phase stability, and Li+ mobility of Li3PS4: insights from first-principles calculations[J]. ACS Applied Materials & Interfaces, 2016, 8(38): 25229-25242.
    [111]
    Zhang X, Wang Q J, Harrison K L, et al. Pressure-driven interface evolution in solid-state lithium metal batteries[J]. Cell Reports Physical Science, 2020, 1(2): 100012.
    [112]
    Tu Q S, Barroso-Luque L, Shi T, et al. Electrodeposition and mechanical stability at lithium-solid electrolyte interface during plating in solid-state batteries[J]. Cell Reports Physical Science, 2020, 1(7): 100106.
    [113]
    Verma A, Kawakami H, Wada H, et al. Microstructure and pressure-driven electrodeposition stability in solid-state batteries[J]. Cell Reports Physical Science, 2021, 2(1): 100301.
    [114]
    Porz L, Swamy T, Sheldon B W, et al. Mechanism of lithium metal penetration through inorganic solid electrolytes[J]. Advanced Energy Materials, 2017, 7(20): 1701003.
    [115]
    Barroso-Luque L, Tu Q S, Ceder G. An analysis of solid-state electrodeposition-induced metal plastic flow and predictions of stress states in solid ionic conductor defects[J]. Journal of the Electrochemical Society, 2020, 167(2): 020534.
    [116]
    Yuan C H, Gao X, Jia Y K, et al. Coupled crack propagation and dendrite growth in solid electrolyte of all-solid-state battery[J]. Nano Energy, 2021, 86: 106057.
    [117]
    Yuan C H, Lu W Q, Xu J. Unlocking the electrochemical-mechanical coupling behaviors of dendrite growth and crack propagation in all-solid-state batteries[J]. Advanced Energy Materials, 2021, 11(36): 2101807.
    [118]
    Shishvan S S, Fleck N A, Mcmeeking R M, et al. Dendrites as climbing dislocations in ceramic electrolytes: Initiation of growth[J]. Journal of Power Sources, 2020, 456: 227989.
    [119]
    Shishvan S S, Fleck N A, Mcmeeking R M, et al. Growth rate of lithium filaments in ceramic electrolytes[J]. Acta Materialia, 2020, 196: 444-455.
    [120]
    李建伟. 硫基固态电解质的改性及其全固态电池性能研究[D]. 济南: 山东大学, 2023.

    Li J W. Modification of sulfide based solid electrolyte and its application in all-solid-state batteries[D]. Jinan: Shandong University, 2023(in Chinese).
    [121]
    Sun F, Wang C, Osenberg M, et al. Clarifying the electro-chemo-mechanical coupling in Li10SnP2S12 based all-solid-state batteries[J]. Advanced Energy Materials, 2022, 12(13): 2103714.
    [122]
    白洋. 全固态厚膜锂电池的研究[D]. 成都: 电子科技大学, 2022.

    Bai Y. All solid-state thick film lithium battery[D]. Chengdu: University of Electronic Science and Technology of China, 2022(in Chinese).
    [123]
    Danilov D, Niessen R A H, Notten P H L. Modeling all-solid-state Li-ion batteries[J]. Journal of the Electrochemical Society, 2011, 158(3): A215-A222.
    [124]
    Zhang D, Tang S X, Couto L D, et al. PDE observer for all-solid-state batteries via an electrochemical model[C]//Proceedings of the IEEE Conference on Control Technology and Applications. Piscataway: IEEE Press, 2022: 51-56.
    [125]
    Kazemi N, Danilov D L, Haverkate L, et al. Modeling of all-solid-state thin-film Li-ion batteries: accuracy improvement[J]. Solid State Ionics, 2019, 334: 111-116.
    [126]
    李学鹏. 基于多物理场全固态锂电池特性仿真研究[J]. 集成电路应用, 2019, 36(12): 4-6.

    Li X P. Study on characteristics simulation of all solid state lithium battery based on multiphysics[J]. Application of IC, 2019, 36(12): 4-6(in Chinese).
    [127]
    Ansah S, Shin N, Lee J S, et al. A comprehensive parametric study for solid-state lithium-ion battery through finite element simulation[J]. Electronic Materials Letters, 2021, 17(6): 532-542.
    [128]
    Wang Q K, Shen J N, He Y J, et al. Design and management of lithium-ion batteries: a perspective from modeling, simulation, and optimization[J]. Chinese Physics B, 2020, 29(6): 068201.
    [129]
    Wang Y, Liu J H, Chen T W, et al. Factors that affect volume change during electrochemical cycling in cathode materials for lithium ion batteries[J]. Physical Chemistry Chemical Physics, 2022, 24(4): 2167-2175.
    [130]
    Kodama M, Horikawa N, Ohashi A, et al. Coupled nonlinear stress and electric field numerical simulation for all-solid-state lithium-ion batteries[J]. Journal of Power Sources Advances, 2021, 8: 100049.
    [131]
    Grazioli D, Verners O, Zadin V, et al. Electrochemical-mechanical modeling of solid polymer electrolytes: impact of mechanical stresses on Li-ion battery performance[J]. Electrochimica Acta, 2019, 296: 1122-1141.
    [132]
    Grazioli D, Zadin V, Brandell D, et al. Electrochemical-mechanical modeling of solid polymer electrolytes: Stress development and non-uniform electric current density in trench geometry microbatteries[J]. Electrochimica Acta, 2019, 296: 1142-1162.
    [133]
    Bistri D, Di Leo C V. Modeling of chemo-mechanical multi-particle interactions in composite electrodes for liquid and solid-state Li-ion batteries[J]. Journal of the Electrochemical Society, 2021, 168(3): 030515.
    [134]
    Song X, Lu Y J, Wang F H, et al. A coupled electro-chemo-mechanical model for all-solid-state thin film Li-ion batteries: the effects of bending on battery performances[J]. Journal of Power Sources, 2020, 452: 227803.
    [135]
    Yamada M, Watanabe T, Gunji T, et al. Review of the design of current collectors for improving the battery performance in lithium-ion and post-lithium-ion batteries[J]. Electrochem, 2020, 1(2): 124-159.
    [136]
    Doyle M, Fuller T F, Newman J. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell[J]. Journal of the Electrochemical Society, 1993, 140(6): 1526-1533.
    [137]
    Fabre S D, Guy-Bouyssou D, Bouillon P, et al. Charge/discharge simulation of an all-solid-state thin-film battery using a one-dimensional model[J]. Journal of the Electrochemical Society, 2012, 159(2): A104-A115.
    [138]
    Pang M C, Wei Y X, Wang H Z, et al. Large-format bipolar and parallel solid-state lithium-metal cell stacks: a thermally coupled model-based comparative study[J]. Journal of the Electrochemical Society, 2020, 167(16): 160555.
    [139]
    孙哲韬, 何英杰, 陈邵杰, 等. 全固态锂金属电池多物理场耦合下的电化学过程仿真模拟[J]. 高等学校化学学报, 2021, 42(5): 1598-1609.

    Sun Z T, He Y J, Chen S J, et al. Simulation of the electrochemistry process with the coupling of multiple physical fields for all-solid-state lithium batteries[J]. Chemical Journal of Chinese Universities, 2021, 42(5): 1598-1609(in Chinese).
    [140]
    Bower A F, Guduru P R, Sethuraman V A. A finite strain model of stress, diffusion, plastic flow, and electrochemical reactions in a lithium-ion half-cell[J]. Journal of the Mechanics and Physics of Solids, 2011, 59(4): 804-828.
    [141]
    郭邦军, 贾理男, 张希. 全固态硫化物锂电池中NCM正极及其界面研究[J]. 化工学报, 2024, 75(3): 743-759.

    Guo B J, Jia L N, Zhang X. A review of NCM cathode and interface characteristics in all-solid-state lithium-ion battery with sulfide electrolytes[J]. CIESC Journal, 2024, 75(3): 743-759 (in Chinese).
    [142]
    Fang X S, He Y L, Fan X M, et al. Modeling and simulation in capacity degradation and control of all-solid-state lithium battery based on time-aging polymer electrolyte[J]. Polymers, 2021, 13(8): 1206.
    [143]
    Bates A, Mukherjee S, Schuppert N, et al. Modeling and simulation of 2D lithium-ion solid state battery[J]. International Journal of Energy Research, 2015, 39(11): 1505-1518.
    [144]
    Talin A A, Ruzmetov D, Kolmakov A, et al. Fabrication, testing, and simulation of all-solid-state three-dimensional Li-ion batteries[J]. ACS Applied Materials & Interfaces, 2016, 8(47): 32385-32391.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(14)  / Tables(4)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views(446) PDF downloads(29) Cited by()
    Proportional views
    Related

    Copyright © Journal of Beijing University of Aeronautics and Astronautics

    Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@buaa.edu.cn

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return