Formation and mechanical properties of Cu-Zr-Ti bulk glassy alloys

[1] Inoue A, Zhang T, Masumoto T. Production of amorphous cylinder and sheet of La₅₅Al₂₅Ni₂₀ alloy by a metallic mold casting method [J]. Materials Transactions, JIM, 1990, 31:425~428 [2]Inoue A, Kato A, Zhang T, et al. Mg-Cu-Y amorphous alloys with high mechanical strengths produced by a metallic mold casting method [J]. Materials Transactions, JIM, 1991, 32:609~616. [3]Zhang T, Inoue A, Masumoto T. Amorphous Zr-Al-TM (TM = Co, Ni, Cu ) alloys with significant supercooled liquid region of over 100 K [J]. Materials Transactions, JIM, 1991, 32:1005~1010. [4]Peker A, Johnson W L. A highly processable metallic-glass— Zr_41.2Ti_13.8Cu_12.5 Ni_10.0Be_22.5[J]. Applied Physics Letters, 1993, 63:2342~2344 [5]Inoue A, Gook G S. Fe-based ferromagnetic glassy alloys with wide supecooled liquid region [J]. Materials Transactions, JIM, 1995, 36:1180~1182 [6]Inoue A. Bulk amorphous alloys with soft and hard magnetic properties. Materials Science and Engineering, 1997, A226-228:357~363 [7]Inoue A, Zhang T, Takeuchi A. Bulk amorphous alloys with high mechanical strength and good soft magnetic properties in Fe-TM-B (TM=IV-VIII group transition metal) system [J]. Applied Physics Letters, 1997, 71:464~466. [8]Inoue A, Nishiyama N, Matsuda T. Preparation of bulk glassy Pd₄₀Ni₁₀Cu₃₀P₂₀ alloy of 40 mm in diameter by water quenching [J]. Materials Transactions, JIM, 1996, 37:181~184 [9]Zhang T, Inoue A. Thermal and mechanical properties of Ti-Ni-Cu-Sn amorphous alloys with a wide supercooled liquid region before crystallization [J]. Materials Transactions, JIM, 1998, 39:1001~1006 [10] Zhang T, Inoue A. Preparation of Ti-Cu-Ni-Si-B amorphous alloys with a large supercooled liquid region [J]. Materials Transactions, JIM, 1999, 40:301~306 [11]Kim Y C, Kim W T, Kim D H. Glass forming ability and crystallization behavior in amorphous Ti₅₀Cu_32-xNi₁₅Sn₃Be_x(x = 0, 1, 3, 7) alloys [J]. Materials Transactions, 2002, 43:1243~1247 [12]Pang S J, Zhang T, Asami K, et al. Synthesis of Fe-Cr-Mo-C-B-P bulk metallic glasses with high corrosion resistance[J]. Acta Materialia, 2002, 50:489~497 [13]Zhang T, Inoue A. New bulk glassy Ni-based alloys with high strength of 3 000 MPa [J]. Materials Transactions, 2002, 43:708~711 [14]Inoue A, Zhang W, Zhang T. Thermal stability and mechanical strength of bulk glassy Ni-Nb-Ti-Zr alloys [J]. Materials Transactions, 2002, 43:1952~1956 [15]Zhang T, Inoue A. Bulk glassy alloys with low liquidus temperature in Pt-Cu-P system [J]. Materials Transactions, 2003, 44:1143~1146 [16]Ma C L, Ishihara S, Soejima H, et al. Formation of new Ti-based metallic glassy alloys [J]. Materials Transactions, 2004, 45:1802~1806. [17]Inoue A. Bulk amorphous alloys [M]. Trans Tech Publications, Zuerich, 1989 [18]Inoue A, Zhang W, Zhang T, et al. Thermal and mechanical properties of Cu-based Cu-Zr-Ti bulk glassy alloys[J]. Materials Transactions, 2001, 42:1149~1151 [19]Inoue A, Zhang W, Zhang T, et al. Formation and mechanical properties of Cu-Hf-Ti bulk glassy alloys [J]. Journal of Materials Research, 2001, 16:2836~2844 [20]Inoue A, Zhang T, Kurosaka K, et al. High-strength Cu-based bulk glassy alloys in Cu-Zr-Ti-Be system [J]. Materials Transactions, 2001, 42:1800~1804 [21]Zhang T, Kurosaka K, Inoue A. Thermal and mechanical properties of Cu-Zr-Ti-Y bulk glassy alloys [J]. Materials Transactions, 2001, 42:2042~2045 [22]Inoue A, Zhang W. Formation, thermal stability and mechanical properties of Cu-Zr-Al bulk glassy alloys [J]. Materials Transactions, 2001, 42:2921~2925 [23]Zhang T, Yamamoto T, Inoue A. Formation, thermal stability and mechanical properties of (Cu_0.6Zr_0.3Ti_0.1)_100-xM_x (M=Fe, Co, Ni) bulk glassy alloys [J].Materials Transactions, 2002, 43:3222~3226 [24]Inoue A, Zhang W. Formation and mechanical properties of Cu-Hf-Al bulk glassy alloys with a large supercooled liquid region of over 90 K [J]. Journal of Materials Research, 2003, 18:1435~1440 [25]Zhang Q S, Zhang H F, Deng Y F, et al. Bulk metallic glass formation of Cu-Zr-Ti-Sn alloys [J]. Scripta Materialia, 2003, 49:273~278 [26]Wang D, Li Y, Sun B B, et al. Bulk metallic glass formation in the binary Cu-Zr system [J]. Applied Physics Letters, 2004, 84:4029~4031 [27]Inoue A, Zhang W. Formation, thermal stability and mechanical properties of Cu-Zr and Cu-Hf binary glassy alloy rods [J]. Materials Transactions, 2004, 45:584~587 [28]Park E S, Chang H J, Kim D H, et al. Formation of amorphous phase in melt-spun and injection-cast Cu₆₀Zr₃₀Ti₁₀ alloys[J]. Scripta Materialia, 2004, 51:221~224 [29]Inoue A. High strength bulk amorphous alloys with low critical cooling rates (overview) [J]. Materials Transactions, JIM, 1995, 36:866~875 [30]Chen H S. Composition dependence of the glass transition temperature of Pd-Ni-P and Pt-Ni-P glasses [J]. Non-Crystalline Solids, 1973, 12:333~338 [31]Japan Institute of Metals. Metals databook [M]. Maruzen, Tokyo, 1993.8 [32]Boer F R, Boom R, Mattens W C M, et al. Cohesion in metals [M]. North-Holland, Amsterdam,1989.103~637