Factors effecting on the wicking of epoxy resin in capillaries of unidirectional fibre bundles

Zhang Zuoguang; Li Min; Sun Zhijie; Chen Liang

Volume 30 Issue 10

Oct. 2004

Turn off MathJax

Article Contents

Abstract

References

Journal of Beijing University of Aeronautics and Astronautics > 2004 > 30(10): 934-938.

Li Minjiang, Gui Xingmin. Staggered finite volume method for turbomachinery viscous flow field numerical investigation[J]. Journal of Beijing University of Aeronautics and Astronautics, 2004, 30(06): 577-582. (in Chinese)

Citation:

Zhang Zuoguang, Li Min, Sun Zhijie, et al. Factors effecting on the wicking of epoxy resin in capillaries of unidirectional fibre bundles[J]. Journal of Beijing University of Aeronautics and Astronautics, 2004, 30(10): 934-938. (in Chinese)

Citation:

PDF( 311 KB)

Factors effecting on the wicking of epoxy resin in capillaries of unidirectional fibre bundles

School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

Received Date: 28 Apr 2004
Publish Date: 31 Oct 2004

Abstract

Abstract

Understanding the wetting behavior of resin in fiber assemblies is critical for predicting and improving the fabrication performance of composites. According to capillary rise method, the wicking flow in unidirectional fiber bundles was characterized through measuring the mass gain in fibers at different time. The effects of many factors on the wicking performance of epoxy resin in unidirectional fiber bundles were investigated, such as the volume fraction of fibers, the type of fibers, the temperature of resins and the sizing on fibers. The experimental data suggest that the wicking velocity of resins could be increased with increasing fiber volume fraction, with enhancing temperature and by removing the sizing on S-2 glass fibers.
- composite materials,
- fiber bundles,
- epoxy resins,
- wetting,
- capillary rise

FullText(HTML)

References(1)

References

[1] Berglund L A, Kenny J M. Processing science for high performance thermoset composites [J]. SAMPE Journal, 1991, 27:27~37 [2]Mecarthy R, Haines G, Newley R. Polymer composite applications to aerospace equipment [J]. Composite Manufacturing, 1994, 5:83~93 [3]Antonucci V, Giordano M, Nicolais L, et al. Resin flow monitoring in resin film infusion process [J]. Materials Processing Technology, 2003, 1:687~692 [4]Rame E. Interpretation of dynamic contact angles measured by the Wilhelmy plate method [J]. Colloid and Interface Science, 1997, 185:245~256 [5]Gu Y, Li D, Cheng P. A novel contact angle measurement technique by analysis of capillary rise profile around a cylinder [J]. Colloids and Surfaces A, 1997, 122:135~149 [6]Abraham M, Ruben D C. Characterization of porous media by the kinetics of liquid penetration:the vertical capillaries model [J]. Colloids and Interface Science, 1997, 189:299~304 [7]Kamusewitz H, Possart W, Paul D. The relation between Young’s equilibrium contact angle and the hysteresis on rough paraffin wax surface [J]. Colloids and Interface Science, 1999,156:271~279 [8]Krishna M P, Suresh G A. Wicking across a fiber bank [J]. Colloids and Interface Science, 1996, 183:100~110 [9]Thomas L S, Donna G S. Wicking flow in irregular capillaries [J]. Colloids and Interface Science, 2002, 204:239~250 [10] Aranberri-Askargorta I, Lampke T, Bismarck A. Wetting behavior of falx fibers as reinforcement for polypropylene [J]. Colloid and Interface Science, 2003,263:580~589 [11]Amico S, Lekakou C. Mathematical modeling of capillary micro-flow through woven fabrics [J]. Composites Part A, 2000, 31:1331~1344 [12]Isabelle P, Guillaume B, David Q. Imbibition of a fabric [J]. Colloids and Interface Science, 1995, 173:319~327 [13] 陈亮. 纤维集束浸润测试方法与单向浸润特性研究 . 北京:北京航空航天大学材料科学与工程学院,2004 Chen Liang. Measurement and characteristics of the wicking of unidirectional fiber bundles . Beijing:School of Materials Science and Engineering, Beijing University of Aeronautics & Astronautics, 2004(in Chinese)

Relative Articles

[1]	TANG X H，DOU Y R. Design and verification of airworthiness compliance of equivalent endurance test cycle of turbofan engine[J]. Journal of Beijing University of Aeronautics and Astronautics，2025，51（1）：133-140 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2022.0953.
[2]	HUANG X G，WU Y F，LIU D Y. Position analysis of seven-link Barranov truss based on conformal geometric algebra[J]. Journal of Beijing University of Aeronautics and Astronautics，2025，51（1）：265-271 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2022.0961.
[3]	CAI Y，SI Y H，WANG Y Z，et al. Analysis and control of influencing factors of cross coupling of flexible gyro[J]. Journal of Beijing University of Aeronautics and Astronautics，2025，51（1）：141-151 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2022.0968.
[4]	XU J M，HUANG Z G，LI R. LEO satellite positioning method and simulation verification aided by airborne navigation equipment[J]. Journal of Beijing University of Aeronautics and Astronautics，2024，50（10）：3230-3238 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2022.0759.
[5]	FU Honglan, ZHANG Hao. Close robust rendezvous on distant retrograde orbits[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0560
[6]	CHENG Y，QIU B W，YU L，et al. Influence of maneuvering modes on flared landing performance of parafoil system[J]. Journal of Beijing University of Aeronautics and Astronautics，2024，50（12）：3940-3946 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2022.0914.
[7]	ZHEN X D，WANG Z A，HU R C，et al. Aircraft flight qualities of short take-off and vertical landing[J]. Journal of Beijing University of Aeronautics and Astronautics，2024，50（5）：1576-1585 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2022.0413.
[8]	NIU G C，WANG X N. A multi-task traffic scene detection model based on cross-attention[J]. Journal of Beijing University of Aeronautics and Astronautics，2024，50（5）：1491-1499 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2022.0610.
[9]	YANG Z J，ZHANG C F，ZHAO R J，et al. Thermal deformation analysis and experimental verification of spatial deployable antenna hinge[J]. Journal of Beijing University of Aeronautics and Astronautics，2024，50（1）：243-249 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2022.0219.
[10]	HUANG Mengdie, WANG Lufeng, HUANG Xuxing, LI Shuang. Space target collision risk analysis algorithm based on the square Mahalanobis distance[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0167
[11]	ZHANG Y X，WANG X J，WANG S P，et al. Mechanism of butterfly forward flight and prototype verification based on characteristic motion observation[J]. Journal of Beijing University of Aeronautics and Astronautics，2023，49（7）：1651-1660 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2021.0497.
[12]	HAN Xiao, ZHOU Ying, HUANG Hai, SHAO Jing-yi. Design and Verification of High-precision Dynamic Temperature Control System[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0297
[13]	ZHANG P，CHI H H，LI J B，et al. Lattice based strong designated verifier signature scheme[J]. Journal of Beijing University of Aeronautics and Astronautics，2023，49（6）：1294-1300 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2021.0445.
[14]	XIE C C，ZHANG D Y，AN C. Reduced order method for large flexible wing structure based on dynamic response data[J]. Journal of Beijing University of Aeronautics and Astronautics，2023，49（6）：1319-1330 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2021.0439.
[15]	HAN X L，SHANGGUAN H，ZHANG X，et al. A low-dose CT image denoising method based on artifact estimation[J]. Journal of Beijing University of Aeronautics and Astronautics，2023，49（2）：491-502 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2021.0263.
[16]	LIU M，AN J S. Research and design of SpaceWire multi-priority hierarchical scheduling crossbar[J]. Journal of Beijing University of Aeronautics and Astronautics，2023，49（12）：3386-3396 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2022.0101.
[17]	XIAO R Y，YU J，MA Z X. Applicability of convolutional autoencoder in reduced-order model of unsteady compressible flows[J]. Journal of Beijing University of Aeronautics and Astronautics，2023，49（12）：3445-3455 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2022.0085.
[18]	HU G，LI Z X，ZHANG F M，et al. Dimension reduction of multivariate time series based on two-dimensional inter-class marginal Fisher analysis[J]. Journal of Beijing University of Aeronautics and Astronautics，2023，49（12）：3537-3546 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2022.0128.
[19]	GUO Tai, QIAN Xin, GONG Qi, REN Wenming, YANG Shuanbao, XU Qinggang. Methodology for model based verification requirements capturing and application in civil aircraft development[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(10): 1933-1942. doi: 10.13700/j.bh.1001-5965.2021.0047
[20]	WANG Shaoping, CHEN Rentong, ZHANG Chao. Reliability estimation for aircraft hydraulic pump based on bivariate performance degradation analysis[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(9): 1613-1623. doi: 10.13700/j.bh.1001-5965.2022.0297

Supplements(0)

Cited By

Cited by

Periodical cited type(6)

1.	唐冬来，李擎宇，周强，龚奕宇，谢飞，周朋，康乐. 基于故障因子的用电采集设备状态评估方法. 供用电. 2024(09): 98-106 .
2.	尧阳烽，余永华，王康，聂方，胡嘉，徐德峰. 基于多源信号融合的往复式压缩机气阀健康评估. 机电工程. 2024(11): 2003-2011 .
3.	刘莉萍，冯清贤，余志斌. 基于改进的ISODATA的超球覆盖仿生模式分类算法. 计算机应用研究. 2023(03): 689-695 .
4.	文静，俞卫琴. 基于马氏距离的半监督近邻传播聚类算法. 软件导刊. 2023(07): 59-65 .
5.	狄谱旭，李旭鹏，张润，张博，原昱，张璐. 应用FTIR技术对尸体内外精液留存时间的研究. 中国法医学杂志. 2023(06): 677-682 .
6.	孔进，曹从咏，吴至锦，王晨. 一种改进的轨道车辆牵引电机性能评价方法研究. 电机技术. 2022(05): 20-25 .

Other cited types(5)

Proportional views

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Get Citation

PDF

XML

Article Metrics

Article views(3127) PDF downloads(18)

Factors effecting on the wicking of epoxy resin in capillaries of unidirectional fibre bundles