Advanced Search
Volume 38 Issue 2
Feb.  2012
Turn off MathJax
Article Contents
Abstract
References
Journal of Beijing University of Aeronautics and Astronautics  > 2012  >  (2): 247-251.
Lu Ning, Fu Yongling, Sun Xinxue, et al. Method of eliminating synchronism control error in flash butt welding of bill[J]. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(08): 936-939. (in Chinese)
Citation: Zhang Li, Ding Zhiyao, Wang Yanzhonget al. Adaptive sampling method of face gear tooth surface[J]. Journal of Beijing University of Aeronautics and Astronautics, 2012, (2): 247-251. (in Chinese)
shu

Adaptive sampling method of face gear tooth surface

  • School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

  • Received Date: 30 Sep 2010
  • Publish Date: 29 Feb 2012
    Abstract
  • Digitizing of face gear tooth surface is one of the key technologies on the tooth surface measurement. Aiming at the sampling of tooth surface on CMM(coordinate measuring machine), a method to determine the quantity of the sampling mesh points according to given precision was presented. The boundary lines of sampling mesh were adapted firstly and the initial sampling mesh could be achieved by the method of cutting-planes. According to the given quantity of the sampling mesh points, there was iterative computation for the initial sampling mesh by the adaptive sampling algorithm based on the measure of curvature, and then the adaptive programming method of face gear tooth surface was developed.

     

    • FullText(HTML)
    • References(9)
  • [1]
    来新民,黄田.数学模型已知的自由曲面自适应采样[J].计算机辅助设计与图形学学报,1999,11(4):359-362 Lai Xinmin,Huang Tian.Adaptive sampling of digitizing for the known free-form surface[J].Journal of Computer Aided Design and Computer Graphics,1999,11(4):359-362(in Chinese)
    [2]
    Menq Chiahsiang,Yan Hongtzong.Automated precision measurement of surface profile in CAD-direction inspection[J].IEEE Transactions on Robotics and Automation,1992,8(2):268-278
    [3]
    Cho M W,Lee H,Yoon G S,at al.A feature-based inspection planning system for coordinate measuring machines[J].International Journal of Advanced Manufacturing Technology,2005,26(9/10):1078-1087
    [4]
    李剑.自由曲面零件的寻位自适应检测方法研究[J].仪器仪表学报,2002,23(5):530-533 Li Jian.State searching adaptive measuring technique for free-form surface parts[J].Chinese Journal of Scientific Instrument,2002,23(5):530-533(in Chinese)
    [5]
    任玉波,孙惠学.CAD模型已知的自由曲面在线检测方法研究[J].精密制造与自动化,2006,3:15-17 Ren Yubo,Sun Huixue.Research on in-process inspection method for CAD model known free curved-surface[J].Precise Manufacturing & Automation,2006,3:15-17(in Chinese)
    [6]
    朱如鹏.面齿轮传动的啮合特性研究 .南京:南京航空航天大学机电学院,2000 Zu Rupeng.Research on meshing characteristic of face gear drive .Nanjing:College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,2000(in Chinese)
    [7]
    Li S Z.Adaptive sampling and mesh generation[J].Computer-Aided Design,1995,27(3):235-240
    [8]
    梅向明,黄敬之.微分几何[M].北京:高等教育出版社,1981 Mei Xiangming,Huang Jingzhi.Differential geometry[M].Beijing:Higher Education Press,1981(in Chinese)
    [9]
    陈浪.基于三坐标测量机的曲面自适应采样和网格生成[J].重庆大学学报:自然科学版,2001,24(4):22-25 Chen Lang.Study on adaptive sampling and mesh generation of free-form surfaces based on coordinate measuring machine[J].Journal of Chongqing University:Natural Science Edition,2001,24(4):22-25(in Chinese)
    • Relative Articles

  • Relative Articles

    [1]XIAO Y，LI Y，LI D S，et al. Influence of curing stress relaxation on profile accuracy of composites tools[J]. Journal of Beijing University of Aeronautics and Astronautics，2025，51（3）：824-832 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2023.0109.
    [2]LIU Y S，YANG Y X，LIU Y，et al. Gust alleviation control system of flexible aircraft considering rudder efficiency[J]. Journal of Beijing University of Aeronautics and Astronautics，2025，51（1）：248-256 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2022.0952.
    [3]WANG Shiqi, LU Hui, ZHANG Yuxuan. Hexagonal grid sampling method for low-dimensional decision boundary identification[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0526
    [4]LI W T，HE Y Q，ZHANG Y Y，et al. Complex burn-back analysis and internal ballistic performance prediction of non-uniform grain[J]. Journal of Beijing University of Aeronautics and Astronautics，2024，50（8）：2524-2537 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2022.0669.
    [5]SUN Y B，WANG R，ZHANG Q，et al. A cross-modality person re-identification method for visible-infrared images[J]. Journal of Beijing University of Aeronautics and Astronautics，2024，50（6）：2018-2025 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2022.0554.
    [6]XIONG F，LI Q，LI J，et al. Time-triggered traffic scheduling-oriented virtual network embedding method[J]. Journal of Beijing University of Aeronautics and Astronautics，2024，50（6）：1982-1990 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2022.0511.
    [7]ZHANG Xu, ZHAO Rui, LI Yu, YANG Guang, WANG Li-yan. Component of gas-injection effects on wall heat flux and skin-friction of vehicles[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0009
    [8]DUAN Jizhong, XIE Yunshuang. Automatic segmentation method of undersampled magnetic resonance imaging based on dual residual networks[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0554
    [9]XU H，HAN J L，CHEN Y，et al. Thickness correction by lifting surface method and its application in morphing simulation of folding wing[J]. Journal of Beijing University of Aeronautics and Astronautics，2024，50（12）：3806-3814 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2022.0926.
    [10]ZHAO Jin-peng, CENG Wei, MA Hai-teng. Method for determining Stanton number on the blunt body in supersonic flow[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0800
    [11]LIU S，LU H Y，ZHANG W W，et al. Fast algorithm for grain burnback of actually shaped grains of solid motor[J]. Journal of Beijing University of Aeronautics and Astronautics，2023，49（11）：3115-3123 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2021.0795.
    [12]ZHU W S，LYU X J，HOU Z Q，et al. Trajectory optimization of air-to-surface missile in full airspace based on combinational optimization algorithm[J]. Journal of Beijing University of Aeronautics and Astronautics，2023，49（2）：344-352 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2021.0252.
    [13]ZOU Qi-hong, XU An-yi, LI Peng, SUN Pei-jie, LI Qian, GE Tian-shu. Experimental study on integrated solid desiccant coated heat pump system for manned spaceflight[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2022.0972
    [14]BAN Huan-heng, ZHOU Cong, YAN Xiao-dong. Rapid Trajectory Planning Method for Lunar Direct Ascent and Rendezvous under Emergency Condition[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0160
    [15]ZHU Y，XIAO S H，CHEN Z T. A registration algorithm with datum constraints and allowance constraints[J]. Journal of Beijing University of Aeronautics and Astronautics，2023，49（3）：580-587 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2021.0314.
    [16]GUAN R，HUANG Y Z，CHEN R，et al. Calculation of cutting angle and cutting force in face gear machining[J]. Journal of Beijing University of Aeronautics and Astronautics，2023，49（8）：1922-1929 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2021.0613.
    [17]ZHU Z H，XIAO T H，XU Y N，et al. Adjoint-based adaptive Cartesian mesh refinement for sonic boom prediction[J]. Journal of Beijing University of Aeronautics and Astronautics，2023，49（9）：2432-2441 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2021.0689.
    [18]ZHANG P H，TANG Y，TANG J，et al. Simulation of cavity flow at high Mach number based on adaptive unstructured hybrid mesh[J]. Journal of Beijing University of Aeronautics and Astronautics，2023，49（6）：1311-1318 （in Chinese）. doi: 10.13700/j.bh.1001-5965.2021.0424.
    [19]XIA Fei, XUE Jianghong, HE Zanhang, JIN Fusong. Interfacial crack growth of delaminated composite laminates under hygrothermal environment[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(12): 2460-2472. doi: 10.13700/j.bh.1001-5965.2021.0137
    [20]GONG Xiaoquan, WU Xiaojun, TANG Jing, LI Ming, ZHANG Jian. Application of r-grid adaptive for shock capturing in discontinuous Galerkin finite element method[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(10): 1889-1898. doi: 10.13700/j.bh.1001-5965.2021.0046
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views(2294) PDF downloads(474) Cited by()
    Proportional views
    Related

    Copyright © Journal of Beijing University of Aeronautics and Astronautics

    Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@buaa.edu.cn

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return