Advanced Search
Volume 38 Issue 6
Jun.  2012
Turn off MathJax
Article Contents
Journal of Beijing University of Aeronautics and Astronautics  > 2012  >  38(6): 849-852.
Kong Fanxia, Zhang Deyuan. Cutting temperature and tool wear in minimum quantity lubrication vibration drilling of superalloys[J]. Journal of Beijing University of Aeronautics and Astronautics, 2012, 38(6): 849-852. (in Chinese)
Citation: Kong Fanxia, Zhang Deyuan. Cutting temperature and tool wear in minimum quantity lubrication vibration drilling of superalloys[J]. Journal of Beijing University of Aeronautics and Astronautics, 2012, 38(6): 849-852. (in Chinese)
shu

Cutting temperature and tool wear in minimum quantity lubrication vibration drilling of superalloys

  • 1.

    School of Agriculture and Food Engineering, Shandong University of Technology, Zibo 255049, China

  • 2. School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

  • Received Date: 30 Mar 2011
  • Publish Date: 30 Jun 2012
    Abstract
  • Processing method of minimum quantity lubrication (MQL) vibration drilling was used to solve difficulty of high cutting temperature and rapid tool wear in drilling of superalloys. Cooling mechanism in vibration drilling was analyzed from the point of heat transfer mechanism and comparative experiments between traditional drilling and vibration drilling were carried out. The results show that the cutting temperature in MQL traditional drilling reaches 110℃ and increases with the drilling depth and the number of holes, while the cutting temperature in MQL vibration drilling is only about 55℃ and changes slowly with the drilling depth and the number of holes; Tool wear in MQL traditional drilling reaches to 0.5 mm and significantly increases with the number of holes, while tool wear in MQL vibration drilling is only 0.22 mm and slowly increases with the number of holes.

     

    • FullText(HTML)
  • loading
    • References(10)
  • [1]
    Gerald A Z,Ronald S,Rene R,et al.Microstructure and mechanical properties of the superalloy ATI Allvac 718Plus[J].Materials Science and Engineering,2009,523(1/2):295-301
    [2]
    乔阳,艾兴,刘战强,等.涂层刀具铣削粉末冶金镍基高温合金试验研究[J].华南理工大学学报:自然科学版,2010,38(8):83-88 Qiao Yang,Ai Xing,Liu Zhanqiang,et al.Experimental investigation into milling of Nickel-based powder metallurgy superalloy with coated tools[J].Journal of South China University of Technology,2010,38(8):83-88(in Chinese)
    [3]
    刘光耀,孙长荣.高温合金孔加工技术[J].重型机械科技,2007(2):32-34 Liu Guangyao,Sun Changrong.Machining technique for high temperature alloy hole[J].Heavy Machinery Science and Technology,2007(2):32-34(in Chinese)
    [4]
    王殿龙,荀志锋,庞继有,等.K24镍基高温合金切削性能实验研究[J].机械工程学报,2002,38(12):190-194 Wang Dianlong,Huan Zhifeng,Pang Jiyou,et al.An investigation of the machine ability of K24 Nickel-based superalloy[J].Chinese Journal of Mechanical Engineering,2002,38(12):190-194(in Chinese)
    [5]
    Chern G L,Liang J M.Study on boring and drilling with vibration cutting[J].International Journal of Machine Tools and Manufacture,2007,47(1):133-137
    [6]
    隈部淳一郎.精密加工振动切削基础与应用[M].韩一昆,薛万夫,孙祥根,等译.北京:机械工业出版社,1985 Kumabe J.Fundamentals and application of vibration cutting[M].Translated by Han Yikun,Xue Wanfu,Sun Xianggen,et al.Beijing:China Machine Press,1985(in Chinese)
    [7]
    马利杰,王贵成,张春燕,等.最小量润滑在振动钻削中的应用[J].机械工程学报,2009,45(1):223-228 Ma Lijie,Wang Guicheng,Zhang Chunyan,et al.Application of minimum quantity lubricant in vibration drilling[J].Chinese Journal of Mechanical Engineering,2009,45(1):223-228(in Chinese)
    [8]
    邢立华,江旭初,张德远,等.浮动铰刀振动铰削小口径火炮身管的研究[J].兵工学报,2007,28(6):739-742 Xing Lihua,Jiang Xuchu,Zhang Deyuan,et al.Study on vibration reaming of small caliber gun tube with auto aligning reamer[J].Acta Armamentarii,2007,28(6):739-742(in Chinese)
    [9]
    袁松梅,刘晓旭,刘强,等.高强钢铣削中微量润滑技术效果的试验分析[J].北京航空航天大学学报,2009,35(2): 179-182 Yuan Songmei,Liu Xiaoxu,Liu Qiang,et al.Experimental analysis of minimal quantity lubrication in milling high-strength steel[J].Journal of Beijing University of Aeronautics and Astronautic,2009,35(2):179-182(in Chinese)
    [10]
    Leonardo D C,Guido T,Miroslav P,et al.Investigation on capability of the reaming process using minimal quantity lubrication[J].Journal of Manufacturing Science and Technology,2009, 2(1): 47
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views(2670) PDF downloads(577) Cited by()
    Proportional views
    Related

    Copyright © Journal of Beijing University of Aeronautics and Astronautics

    Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@buaa.edu.cn

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return