Advanced Search
Volume 38 Issue 11
Nov.  2012
Turn off MathJax
Article Contents
Journal of Beijing University of Aeronautics and Astronautics  > 2012  >  (11): 1474-1477.
Liu Changxu, Wu Guoqing, Sha Aixue, et al. Situ observations of structural transformation in TB5 titanium alloy during one way tensile test[J]. Journal of Beijing University of Aeronautics and Astronautics, 2012, (11): 1474-1477. (in Chinese)
Citation: Liu Changxu, Wu Guoqing, Sha Aixue, et al. Situ observations of structural transformation in TB5 titanium alloy during one way tensile test[J]. Journal of Beijing University of Aeronautics and Astronautics, 2012, (11): 1474-1477. (in Chinese)
shu

Situ observations of structural transformation in TB5 titanium alloy during one way tensile test

  • 1.

    School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

  • 2. Beijing Institute of Aeronautical Materials, Beijing 100095, China

  • Received Date: 01 Jun 2011
  • Publish Date: 30 Nov 2012
    Abstract
  • Microstructure transformation in Ti-15V-3Cr-3Sn-3Al(TB5) titanium alloy during one way tensile test was studied in situ observations of the video microscope. The results show that the change of the microstructure of the titanium alloy in uniaxial tension is not obvious in the elastic stage, but according to the change of the slip bands in the microstructure it can be divided into three stages following with the increase of the deformation in the plastic stage. The three stages are the single slip, the multiple slip and the cross slip.Geometric hardening occurs from the single slip to the multiple slip in uniaxial tension, so the change of the grains slows down and the rotation range of the slip bands is smaller.

     

    • FullText(HTML)
  • loading
    • References(14)
  • [1]
    Zhang Fangzhe,Zhou Qing,Chen Wenjie,et al.Study on two stage superplastic behavior of Ti-15-3 alloy in Beta phase area[J].Hot Working Technology,2010,39(2):17-20
    [2]
    Ji Renfeng,Min Xinhua,Hu Hongjian,et al.Effect of heat treatment on microstructure and mechanical property of Ti-15-3 hot-rolled bar[J].Rare Metals and Cemented Carbide,2010,38(2):49-52
    [3]
    Huang Deming,Yang Xiongfei,Wei Qingfeng,et al.Cause analysis of fracture for TB5 slab[J].Iron Steel Vanadium Titanium,2011,32(1):23-28
    [4]
    Imam M A,Poulose P K,Rath B B.Beta titanium alloys in the 1990’s[M].Warrendale: The Minerals, Metals and Materials Society,1993:261-271
    [5]
    Wang Qingru,Zhang Qingling,Wei Shouyong.Performance data of Ti-15-3 alloy[J].Materials Engineering,1996(11):17-21
    [6]
    Boyer R R.An overview on the use on titanium in the aerospace industry[J].Materials Science and Engineering,1996,A213(1/2):103-114
    [7]
    Chang Rongfu,Chen Xiaodai.Research and experiment of the performance of sheet metal strengthened forming[J].Aviation Engineering and Maintenance,1984(1/2):44-47
    [8]
    Panda S K,Kumar D R,Kumar H,et al.Characterization of tensile properties of tailor welded IF steel sheets and their formability in stretch forming[J].Materials Processing Technology,2007,183(2/3):321-332
    [9]
    Li Caiju,Gu Jialin,Liu Qing.Superplastic of Ti-15-3 titanium alloy[J].Journal of Aeronautical Materials,2003,18(4):52-58
    [10]
    Lee Y S,Kim M C,Kim S W,et al.Experimental and analytical studies for forming limit of AZ31 alloy on warm sheet metal forming[J].Materials Processing Technology,2007,187/188:103-107
    [11]
    Lindgren M,Bexell U,Wikström L.Roll forming of partially heated cold rolled stainless steel[J].Materials Processing Technology,2009,209(7):3117-3124
    [12]
    Li X W,Lu M X,Sha A X,et al.The tensile deformation behavior of Ti-3Al-4.5V-5Mo titanium alloy[J].Materials Science and Engineering A, 2008,490(1/2):193-197
    [13]
    Sanders D G,Ramulu M,Klock-McCook E J,et al.Characterization of superplastically formed friction stir weld in Titanium 6Al-4V:preliminary results[J].Journal of Materials Engineering and Performance,2008,17(2):187-192
    [14]
    Guo Qiang,Wang Qing,Han Xiuli,et al.Precipitation behavior of α phase and mechanical properties in severely plastic deformed Ti-15-3 alloy[J].Rare Metal Materials and Engineering,2011,40(3):377-383
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views(1833) PDF downloads(692) Cited by()
    Proportional views
    Related

    Copyright © Journal of Beijing University of Aeronautics and Astronautics

    Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@buaa.edu.cn

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return