Volume 39 Issue 12
Dec.  2013
Turn off MathJax
Article Contents
Xu Fei, Li Chuanri, Jiang Tongmin, et al. Optimization of excitation and measurement location in experimental modal test[J]. Journal of Beijing University of Aeronautics and Astronautics, 2013, 39(12): 1654-1659. (in Chinese)
Citation: Xu Fei, Li Chuanri, Jiang Tongmin, et al. Optimization of excitation and measurement location in experimental modal test[J]. Journal of Beijing University of Aeronautics and Astronautics, 2013, 39(12): 1654-1659. (in Chinese)

Optimization of excitation and measurement location in experimental modal test

  • Received Date: 23 Jan 2013
  • Publish Date: 30 Dec 2013
  • Determining the best excitation point is one of the key problems in correlation analysis. To choose the best excitation point, finite element model and a new criterion based on Mode Participation which was named coefficient of variance of mode participation criterion (CVMPC) were studied and presented. PCB case studies were presented to validate the new criterion. In the case study, the best excitation point and second best point were selected by using both CVMPC and Mode Participation method, comparison was made to show better results presented by CVMPC. The system equivalent reduction expansion process (SEREP), modal assurance criteria (MAC) and coordinate modal assurance criteria (CoMAC) were used to show the error introduced by inappropriate selection of measurement points. PCB case studies were presented to show effects of measurement points selection on correlation analysis. The case studies suggest that better results yielded by more selective picking of measurement points.

     

  • loading
  • [1]
    Allemang R J, Brown D L.A correlation coefficient for modal vector analysis[C]//Proceedings of the First International Modal Analysis Conference.Orlando, Florida:, 1982
    [2]
    Avitabile P, Milani J, O-Callahan J C.Model correlation and orthogonality criteria[C]//6th International Modal Analysis Conference.Kissimmee, Florida:, 1988
    [3]
    Lieven N A J, Ewins D J.Spatial correlation of mode shapes, the coordinate modal assurance criteria (COMAC)[C]//6th International Modal Analysis Conference.Kissimmee, Florida:, 1988
    [4]
    Avitabile P, Pechinsky F.Coordinate orthogonality check (CORTHOG)[C]//12th International Modal Analysis Conference.Honolulu, Hawaii:[s.n], 1994
    [5]
    Heylen W, Lammens S.FRAC:a consistent way of comparing frequency response functions[C]//Proceedings of the International Conference on Identification in Engineering Systems.Swansea:[s.n], 1996:48-57
    [6]
    Grafe H.Model updating of large structural dynamics models using measured response functions[D].UK:Imperial College of Science, Technology and Medicine, University of London, 1998
    [7]
    Allemang R J.The modal assurance criterion-twenty years of use and abuse[J].Sound and Vibration, 2003, 37(8):14-21
    [8]
    Heylen W, Avitabile P.Correlation considerations-part 5 (degree of freedom correlation techniques)[C]//16th International Modal Analysis Conference.Santa Barbara, USA:[s.n], 1998
    [9]
    Matsumura Y.Uncertainty in cross orthogonality checks[J].JSME International Journal, Series C Mechanical Systems, Machine Elements and Manufacturing, 2003, 46(2):692-698
    [10]
    Blelloch P, Vold H.Orthogonality and large models-what-s the problem [C]//23rd International Modal Analysis Conference (IMAC XXⅢ).Orlando, Florida:[s.n], 2005
    [11]
    Guyan R J.Reduction of stiffness and mass matrices[J].AIAA Journal, 1965, 3(2):380-380
    [12]
    Irons B M.Structural eigenvalue problems:elimination of unwanted variables[J].AIAA Journal, 1965, 3(5):961-962
    [13]
    Miller C A.Dynamic reduction of structural models[J].Journal of the Structural Division, ASCE, 1980, 106(10):2097-2108
    [14]
    Malpartida C A.Dynamic condensation of structural eigenproblems[D].KY:University of Louisville, 1983
    [15]
    O-Callahan J C, Chou C M, Koung R T F.Improved starting vectors for subspace Iteration eigensolution using dynamic condensation[C]//Fourth International Modal Analysis Conference.Los Angeles, California:Union College, 1986
    [16]
    O-Callahan J C.A procedure for an improved reduced system (IRS) model[C]//7th International Modal Analysis Conference.Las:Union College Press, 1989
    [17]
    Kammer D.A hybrid approach to test-analysis model development for large space structures[J].Journal of Vibration and Acoustics, 1991, 113(3):325-332
    [18]
    O-Callahan J, Avitabile P, Riemer R.System equivalent reduction expansion process (SEREP)[C]//7th International Modal Analysis Conference.Las Vegas:, 1989:29-37
    [19]
    Avitabile P, O-Callahan J C, Milani J.Comparison of system characteristics using various model reduction techniques[C]//7th International Modal Analysis Conference.Las Vegas, Nevada:[s.n], 1989
    [20]
    Avitabile P, O-Callaban J C, Pan E.Effects of various model reduction techniques on computed response[C]//7th International Modal Analysis Conference.Las Vegas, Nevada:[s.n], 1989
    [21]
    O-Callahan J C.Comparison of reduced model concepts[C]//8th International Modal Analysis Conference.Kissimmee:[s.n], 1990
    [22]
    Nimityongskul S, Kammer D C.Frequency domain model reduction based on principal component analysis[J].Mechanical Systems and Signal Processing, 2010, 24(1):41-51
    [23]
    Ward Heylen.Modal analysis theory and testing[M].2nd ed.Katholieke Univ Leuven:Departement Werktuigkunde Press, 1998:75-75
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views(1439) PDF downloads(1043) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return