Gao Qingji, Wang Lei, Niu Guochen, et al. Path planning for continuum robot based on target guided angle[J]. Journal of Beijing University of Aeronautics and Astronautics, 2013, 39(11): 1486-1490. (in Chinese)
Citation: Huang Xiaodong, Li Bohu, Chai Xudong, et al. Reflection based distributed interactive simulation framework[J]. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(08): 994-999. (in Chinese)

Reflection based distributed interactive simulation framework

  • Received Date: 10 Oct 2006
  • Publish Date: 31 Aug 2007
  •  Adaptability is one of the most important qualities of the software frameworks, for which are used in various applications of a field. Reflection was introduced to improve the adaptability and support re-configuration of a modeling and simulation framework for the development of large scale simulation systems. Through the reflection of architecture of the framework, the framework supported architectural evolution and re-configuration in run time. Through the reflection of context of the simulation component or object models, the models supported dynamic representation and behavioral evolution. By organizing the reflective information into memory database which was maintained by HLA/RTI, the system was repository-centered architecturally. As a result, security of the reflective system was improved and a new design pattern based on the reflective database was presented. On the other hand, the interface of RTI was encapsulated, so a more advanced distributed computing environment and simulation engine with friendly interface was provided, which could support the development of applications rapidly and strongly.

     

  • [1] Cazzola W, Chiba S, Ledoux T. Reflection and meta-level architectures:state of the art, and future trends Proceedings of the ECOOP-00 Workshop on Reflection and Meta-Level Architectures. Heidelberg, Germany:Springer-Verlag, 2000:1-15[2] Massimo A, Cazzola W. The essence of reflection:a reflective run-time environment Proceedings of the 9th Annual ACM Symposium on Applied Computing (SAC-04). Nicosia, Cyprus:ACM, 2004:1503-1507[3] Smith B C. Reflection and semantics in a procedural language. MIT-LCS-TR-272, 1982[4] Shigeru C. A meta-object protocol for C++ Proceedings of OOPSLA’95. Austin, Texea:ACM, 1995:285-299[5] Cazzola W,Ancona M,Canepa F,et al.Enhancing Java to support object groups. 2002. [6] Blair G S, Coulson G, Robin P. Architecture for next Generation Middleware Proceedings of the Middleware-98. New York:Springer-Verlag, 1998:191-206[7] 黄罡, 王千祥, 梅宏,等.基于软件体系结构的反射式中间件研究[J]. 软件学报,2003,14(11):1819-1826 Huang Gang, Wang Qianxiang, Mei Hong,et al. Research on architecture-based reflective middleware[J]. Journal of Software, 2003, 14(11):1819-1826(in Chinese)[8] Bass Len, Clements Paul, Kazman Rick. Software architecture in practice[M]. MA:Addison Wesley Longman Inc, 1998.[9] Shaw Mary, Garlan Divid. Software architecture[M]. NJ:Prentice-Hall International Inc, 1996[10] DMSO. High level architecture-frame and rules version 1.3. 1998. [11] DMSO. HLA Federation development and execution process (FEDEP) model. 1999. [12] Hunt K, Dahmann J, Lutz R, et al. Planning for the evolution of automated tools in HLA. 1997. [13] Kevin C, A Framework-based approach to HLA federate development. 1998. [14] 张宇宏,胡亚海,彭晓源. 基于HLA的防空导弹武器系统仿真平台研究[J].北京航空航天大学学报,2003,29(1):1-4 Zhang Yuhong, Hu Yahai, Peng Xiaoyuan. Simulation platform based on HLA for air defense missile weapon system [J]. Journal of Beijing University of Aeronautics and Astronautics, 2003,29(1):1-4(in Chinese)[15] Regis Dumond, Reed Little. A federation object model(FOM) flexible federate framework. Technical Report CMU/SEI-2003-TN-007, 2003[16] Gamma E, Helm R, Johnson R, et al. Design patterns, elements of reusable object-oriented software[M]. MA:Addison Wesley Publishing Company, 1995[9] Saunders C, Lopata V, Barnard J, et al. Electron beam curing:taking good ideas to the manufacturing floor [J]. Radiation Physics and Chemistry, 2000, 57:441-445[10] Berejka A J, Eberle C. Electron beam curing of composites in North America [J]. Radiation Physics and Chemistry, 2002, 63(3-6):551-556[11] Boursereau F, Dupillier J M, Larnac G, et al. Advanced electron beam composites and modeling approach for spacecraft and transportation applications International SAMPE Symposium and Exhibition. Covina, CA:Society for the Advancement of Material and Process Engineering, 2000, 45:2235-2245[12] Foedinger R, Schneider T, Grande R, et al. Development of electron beam curable composite motor cases International SAMPE Symposium and Exhibition. Covina, CA:Society for the Advancement of Material and Process Engineering, 2002, 47:570-584[13] Lopata V J, Sidwell D R, Idgeon F E, et al. Preliminary test results for a type-trial repair on air Canada airbus aircraft fleet Proceedings of the 43rd International SAMPE Conference. Covina, CA:Society for the Advancement of Material and Process Engineering, 1998:1672-1680[14] 隋刚,张佐光,袁宇慧,等. 增强纤维对环氧树脂基体电子束固化特征的影响研究 [J]. 复合材料学报, 2003, 20(2):1-6 Sui Gang, Zhang Zuoguang, Yuan Yuhui, et al. Study on effect of reinforce fiber on characteristic of electron beam curing in epoxy resin matrix [J]. Acta Materiae Compositae Sinica, 2003, 20(2):1-6 (in Chinese)[15] 刘玉文, 张志谦, 黄玉东, 等. 电子束固化复合材料界面 [J]. 复合材料学报, 2002, 19(3):16-20 Liu Yuwen, Zhang Zhiqian, Huang Yudong, et al. Interface of electron beam cured carbon fiber reinforced composites [J]. Acta Materiae Compositae Sinica, 2002, 19(3):16-20 (in Chinese)
  • Relative Articles

    [1]LI Songsong, LIU Siqi, MA Qiang, HOU Mingpeng, YU Xuan. Analysis and compensation of key geometric errors in sand mold forming machine based on typical machining elements[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2025.0066
    [2]WEI J R,WU Q,WU W,et al. Study on global stability of aluminum alloy honeycomb cylinder under axial compression[J]. Journal of Beijing University of Aeronautics and Astronautics,2025,51(3):962-972 (in Chinese). doi: 10.13700/j.bh.1001-5965.2023.0135.
    [3]GUO Y,LIU D J,CHANG X L,et al. Corrosion behavior of 2195-T8 aluminum-lithium alloy with artificial defects in 30% HNO3[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(3):896-903 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0344.
    [4]PANG C,LIU D J,TIAN G,et al. Experimental and simulation study on fatigue multi crack fusion of 2195-T8 Al-Li alloy[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(1):350-358 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0249.
    [5]HOU R L,WANG C Y,ZHOU P. Tensile properties of rapid repaired CCF300/QY8911 laminates with broken hole damage[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(7):2172-2183 (in Chinese). doi: 10.13700/j.bh.1001-5965.2023.0485.
    [6]ZHANG Yun, LIU Jingqing, CHENG Geng, LEI Xin, XU Zhiyong. Establishment and Experimental Study of Polishing Model for Titanium Alloy Front and Rear Edges[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0541
    [7]LI X Q,ZHANG H G,WANG S,et al. Development and experimental of friction tester for aluminum alloy sheet stamping[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(6):1898-1910 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0542.
    [8]LIU Chun-lei, MENG Bao, ZHU Yu, YAN Bin-yu, WAN Min. Multi-steps hydroforming technology of small diameter C-shaped metallic seal ring[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0839
    [9]CUI H G,YAN X Y,GAO Y F,et al. Efficient prediction method for Kelvin-Helmholtz instability growth on transcritical droplet surface in composite coordinate system[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(9):2835-2842 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0701.
    [10]RAN G L,MA Y H,AN Z Q,et al. Study of tensile properties of laminates containing microvascular channels with different diameters[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(4):1405-1415 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0490.
    [11]JIA Wei, ZHANG Feng, YANG Bo-wen, ZHENG Miao. The ice crystal melting characteristics in a low-pressure compressor[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0326
    [12]CHEN Shi, XU He-ming, SUN Kai, XU Yi-han, ZHANG Yi-shang. Prediction of creep strain of turbine blades based on finite element nodes[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0639
    [13]LIU D J,TIAN G,LI Y L,et al. Research on pre-corrosion fatigue properties of 2195 Al-Li alloys in 30% HNO3[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(4):1129-1137 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0445.
    [14]FAN X,CHENG Z H,LI S X,et al. Effect of critical eccentricity on forming accuracy of tubes in 3D free bending process[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(1):208-215 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0221.
    [15]YANG Gong-peng, ZHOU Zheng-gan, MA Teng-fei, WANG Jun, LI Yang, ZHOU Wen-bin. Research on finite element simulation modeling for ultrasonic testing of coarse-grained materials[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0676
    [16]HAN X,SUN Z F,GENG D X,et al. Experiment research on high-speed ultrasonic vibration milling of titanium alloy[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(7):1707-1714 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0519.
    [17]ZHAO Yue-qing, LIN De-zhi, CHEN Hui, TANG Jia-li, CHEN Ping. Performance test and constitutive model selection of diaphragms in hot diaphragm forming[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0350
    [18]XU M R,ZENG B Y,XIONG X,et al. Tensile fatigue properties of carbon fiber laminates in hygrothermal environments[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(7):1614-1622 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0565.
    [19]ZHANG S,HE Y T,NI B,et al. Effect of nitrate on exfoliation corrosion of 2A12-T4 aluminum alloy under full-immersion corrosion condition[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(6):1372-1382 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0473.
    [20]XU Haiying, YANG Guang, ZHANG Wei, YANG Bo, SANG Xinghua, WANG Zhuang. Properties of gas discharge electron beam coaxial wire of fuse additive manufacturing and microstructure of TC4 titanium alloy[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(12): 2373-2380. doi: 10.13700/j.bh.1001-5965.2021.0147
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views(2741) PDF downloads(935) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return