Citation: | Zeng Liang, Li Lin. Design of damping-ring for vibration control in labyrinth air seals[J]. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(05): 518-522. (in Chinese) |
[1] 航空发动机设计手册总编委会.航空发动机设计手册[M]. 第18分册,北京:航空工业出版社, 2001 Chief Compliation Committee of Design of Turbo Engine. Manual for design of turbo engine[M]. Fascicule 18, Beijing:Aviation Industry Press, 2001(in Chinese) [2] Alford J S. Protection of labyrinth seals from flexural vibration[J]. Journal of Engineering for Power, 1964:141-148 [3] Alford J S. Protecting turbo machinery from unstable and oscillatory flows[J]. Journal of Engineering for Power, 1967:513-528 [4] Alford J S. Nature, cause and prevention of labyrinth air seal failures[J]. Journal of Aircraft, 1975,12 (4):313-318 [5] Niemotka M A, Ziegert J C. Optimal design of split ring dampers for gas turbine engines International Gas Turbine and Aeroengine Congress and Exposition. Cincinati, Ohio:ASME, 1993 [6] 曾亮,李琳.具有接触接合面的封严组件振动特性分析[J]. 航空动力学报, 2006, 21(5):854-861 Zeng Liang, Li Lin. The vibration performance of contact system of labyrinth assembly[J]. Journal of Aerospace Power,2006, 21(5):854-861 (in Chinese) [7] 倪振华. 振动力学[M].西安:西安交通大学出版社,1990 Ni Zhenhua. Mechanics of vibration[M]. Xi-An:Xi-an Jiaotong University Press, 1990(in Chinese) [8] 季葆华,王乐天,李辛毅,等,带阻尼结构长叶片振动响应的研究[J].西安交通大学学报,1996, 30(12):53-58 Ji Baohua, Wang Letian, Li Xinyi, et al. Investigation of vibration response of long blade with snubber damper[J]. Journal of Xi-An Jiaotong University, 1996, 30(12):53-58 (in Chinese)
|