Active integrated devices PDN vector fitting modeling method
-
摘要: 基于矢量拟合(VF,Vector Fitting)原理和电路综合理论,提出了一种有源集成器件宽带电路建模方法,用于电磁兼容仿真.将在直流偏置下测量获得的端口参数采用矢量拟合方法转化为极点-留数与时域状态方程的形式;然后创建时域电路模型,将状态方程转化为与SPICE(Simulation Program with Integrated Circuit Emphasis)兼容的网表电路模型.该网表可以代替原芯片PDN(Power Distribution Network)用于电路仿真,最后使用该方法对样本芯片PDN模块建模并与相应的集成电路等效模型(ICEM,IC Electromagnetism Modeling)进行对比,结果表明:矢量拟合模型相比ICEM模型具有更宽的有效带宽以及更小的模型误差.Abstract: Based on the vector fitting principle and circuit theory, a kind of active integrated device wideband circuit modeling methods for electromagnetic magnetic compatibility(EMC) simulation was proposed. The port parameters in DC bias obtained by measurements using vector fitting method were transformed into pole-residue and time domain state equation model; then a circuit netlist model which compatible with simulation program with integrated circuit emphasis(SPICE) was obtained, the netlist can replace the target chip used in circuit simulation. Finally, this method was used for sample chip power distribution network(PDN) module and was compared with the IC electromagnetism modeling(ICEM) modeling. The results show that the vector fitting model has a wider bandwidth and smaller model errors.
-
[1] IEC 62014-3,2001 Cookbook for integrated circuit model ICEM [S] [2] Mabuchi Y.LECCS(linear equivalent circuit and current source) modeling technique for ICs[J].EMC Zurich 2005,2005:781-799 [3] IEC 62433-2,2008 Models of integrated circuits for EMI behavioral simulation-conducted emissions modeling (ICEM-CE)[S] [4] Changl Yin Cheng,Wang Bing Yi.The evaluation flow for EMC behavior of RF ICs[C]//Electromagnetic Compatibility (APEMC).Singapore:[s.n.],2012:321-324 [5] Berbel N.An alternative approach to model the internal activity of integrated circuits[C]//EMC Compo 2011 8th Workshop on.Dubrovnik:EMC Compo 2011,2011:88-92 [6] C-ecile Labussi-ere-Dorgan,Sonia Bendhia.Modeling the electromagnetic emission of a microcontroller using a single model[J].IEEE Transactions on Electromagnetic Compatibility,2008, 50(1):22-34 [7] Nakamura K,Fguchi K,Hojo S,et al.Development of processor for the I/O interface model for integrated circuit(IMIC) [J].Joho Shori Gakkai Shinpojiumu Ronbunshu,2004(8):163-168 [8] JEIAJ ED-5302 Standard for I/O model for integrated circuits(IMIC)[S] [9] 吴大正.信号与线性系统分析[M].3版.北京:高等教育出版社,2004:225-226 Wu Dazheng.Analysis of signals and liner system[M].3rd ed.Beijing:Higher Education Press,2004:225-226(in Chinese) [10] Gustavsen B,Semlyen A.Rational approximation of frequency domain responses by vector fitting[J].IEEE Transactions on Power Delivery,1999,14(3):1052-1061 [11] Deschrijver D,Dhaene T.Broadband macromodelling of passive components using orthonormal vector fitting[J]. Electronics Letters,2005,41(21):1160-1161 [12] Gustavsen B,Heitz C.Fast realization of the modal vector fitting method for rational modeling with accurate representation of small eigenvalues[J].IEEE Transactions on Power Delivery,2009,24(3):1396-1405 [13] Achar R,Nakhla M.Simulation of high-speed interconnects[J].Proceeding of the IEEE,2001,89(5):693-728 [14] Boyer A.Modeling of conducted noise propagation though the power distribution network of a phase-locked loop[R/OL].France :Toulouse,2012.http://www.ic-emc.org
点击查看大图
计量
- 文章访问数: 1680
- HTML全文浏览量: 230
- PDF下载量: 854
- 被引次数: 0