北京航空航天大学学报 ›› 2012, Vol. 38 ›› Issue (6): 772-777.

• 论文 • 上一篇    下一篇

通断式多态系统扩展测试性建模方法

石君友, 王风武, 张鑫, 史萌   

  1. 北京航空航天大学, 可靠性与系统工程学院, 北京 100191
  • 收稿日期:2011-03-10 出版日期:2012-06-30 发布日期:2012-06-30

Method of extended testability modeling for on-off multi-state system

Shi Junyou, Wang Fengwu, Zhang Xin, Shi Meng   

  1. School of Reliability and Systems Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China
  • Received:2011-03-10 Online:2012-06-30 Published:2012-06-30

摘要: 现有测试性建模方法有一定的约束条件,包括故障判据的一致性、故障传递关系的一致性、测试的逻辑值判据一致性.针对通断式多态系统具有的状态差异性的特点,提出了一种扩展测试性建模方法.在引入状态集合的基础上,对故障、测试、 D 矩阵和诊断树进行了扩展定义,最后定义了扩展测试性模型.介绍了扩展测试性建模分析的算法,主要有模型建立算法、扩展 D 矩阵生成算法、扩展诊断树生成算法.以某液压操纵系统为例进行了应用,结果验证了方法的可行性和有效性.

Abstract: The existing methods for testability-modeling have some constraints, including the consistency of failure criterion, failure transmitting and logical-value criterion of test. Aiming at states differences of on-off multi-state system, the method of extended testability modeling was proposed. Failure, test, D matrix and diagnostic tree were defined extended with the introduction of states, and an extended testability model was defined also. The algorithms for extended testability modeling and analysis were described, which include modeling, generations of extended D matrix and extended diagnostic tree. A hydraulic control system was taken as an example for the engineering application, which shows that this method is feasible and effective.

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发