北京航空航天大学学报 ›› 2012, Vol. ›› Issue (9): 1245-1249.

• 论文 • 上一篇    下一篇

半规则三角网格模型细分曲面重构

陈甜甜, 赵罡   

  1. 北京航空航天大学 机械工程及自动化学院, 北京 100191
  • 收稿日期:2011-09-30 出版日期:2012-09-30 发布日期:2012-09-27
  • 基金资助:
    国家自然科学基金资助项目(61170198); 北京市科技新星计划资助项目(2007B018)

Semi-regular triangular mesh subdivision surface reconstruction

Chen Tiantian, Zhao Gang   

  1. School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China
  • Received:2011-09-30 Online:2012-09-30 Published:2012-09-27

摘要: 针对逆向工程中的三角网格重构问题,提出了一种保持尖锐特征的半规则三角网格模型细分曲面重构算法,以充分利用细分曲面的多分辨特性.首先经提取尖锐特征和删除最大独立点集得到基网格,然后利用插值Loop细分和最近点法向投影法不断调整半规则网格得到重采样网格,最后运用渐进插值(PI,Progressive Interpolation)算法生成半规则细分曲面.实例表明,重构后获得的细分曲面连接性好,可以直接进行细分小波分析.

Abstract: Focusing on mesh reconstruction problem of reverse engineering, a subdivision surface reconstruction method to reproduce a semi-regular triangular mesh while preserving the sharp feature was proposed, which can make full use of the multiresolution analysis of subdivision surface. Firstly, the base mesh was created by removing maximally the independent set of vertices after the pretreatment. Then by employing the nearest point method on the normal direction projection and considering the Loop subdivision limited position mask, iterative vertices modifications were utilized to adapt the semi-regular mesh to fit the subdivision surface. Finally, experimental results were given to illustrate the effectiveness and efficiency of the proposed method.

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发