北京航空航天大学学报 ›› 2016, Vol. 42 ›› Issue (8): 1731-1738.doi: 10.13700/j.bh.1001-5965.2015.0528

• 论文 • 上一篇    下一篇

基于广义退化的机械结构模糊时变可靠性分析

孙瑄1,2, 张建国1,2, 王丕东1,2, 彭文胜1,2   

  1. 1. 北京航空航天大学 可靠性与系统工程学院, 北京 100083;
    2. 北京航空航天大学 可靠性与环境工程技术国防科技重点实验室, 北京 100083
  • 收稿日期:2015-08-17 出版日期:2016-08-20 发布日期:2015-12-08
  • 通讯作者: 张建国,Tel.:010-82338356,E-mail:zjg@buaa.edu.cn E-mail:zjg@buaa.edu.cn
  • 作者简介:孙瑄,女,硕士研究生。主要研究方向:机械可靠性。Tel.:010-82339970。E-mail:sunxuan1027@163.com;张建国,男,博士,教授,博士生导师。主要研究方向:机械/结构/机构可靠性。Tel.:010-82338356。E-mail:zjg@buaa.edu.cn
  • 基金资助:
    国家“973”计划(2013CB733000)

Fuzzy time-variant reliability analysis of mechanical structure based on generalized degradation

SUN Xuan1,2, ZHANG Jianguo1,2, WANG Pidong1,2, PENG Wensheng1,2   

  1. 1. School of Reliability and System Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China;
    2. Science and Technology on Reliability and Engineering Laboratory, Beijing University of Aeronautics and Astronautics, Beijing 100083, China
  • Received:2015-08-17 Online:2016-08-20 Published:2015-12-08

摘要: 航天在轨机械产品样本量少的特点导致其相关参数和动态退化失效判据具有模糊性,而现有的模糊可靠性模型一般针对静态问题进行分析,并不能描述机械产品可靠性的时变、模糊问题。本文基于广义应力强度干涉模型,同时考虑变量和失效判据的模糊性,提出了模糊时变可靠性建模及分析方法。该方法首先将模糊判据转化为极限状态方程中的随机变量;然后利用模糊论中的截集法处理模糊随机变量,建立机械产品的模糊时变可靠性模型;之后基于PHI2方法(一种基于上穿方法的结构时变可靠性分析方法)提出了求解模糊时变可靠度的新方法(FPHI2);最后结合数值算例和工程案例验证了该方法的可行性。

关键词: 模糊, 退化, 时变可靠度, 截集, PHI2

Abstract: The character that the specimen number of on-orbit mechanical products in space is small leads to the fuzziness of relative parameters and the dynamic degraded failure criterion. The existing fuzzy reliability model mainly aims at static problems, which cannot describe the time-variant and fuzzy problem. This paper proposes a fuzzy time-dependent reliability modeling and analysis method which is based on the interference model of generalized stress-strength and takes account of the fuzziness of both variables and failure criterion at the same time. First, fuzzy criterion can be transferred into random variables equivalently. Then the theory of cut set in fuzzy math can be used to deal with the fuzzy random variables, and thus the fuzzy time-variant reliability model is built. After that, a new method (FPHI2) is presented, based on the method of PHI2 which is a tool for time-variant reliability computation based on the outcrossing approach, to compute the fuzzy time-variant reliability. In the end, a numerical case and an engineering case are provided to verify the feasibility of the proposed method.

Key words: fuzziness, degradation, time-variant reliability, cut set, PHI2

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发