北京航空航天大学学报 ›› 2016, Vol. 42 ›› Issue (12): 2715-2721.doi: 10.13700/j.bh.1001-5965.2015.0839

• 论文 • 上一篇    下一篇

通用导弹雷达罩曲面分片展开系统的开发

李正洲, 肖天航, 昂海松, 陆召严   

  1. 南京航空航天大学 航空宇航学院, 南京 210016
  • 收稿日期:2015-12-21 出版日期:2016-12-20 发布日期:2016-06-29
  • 通讯作者: 肖天航,E-mail:xthang@nuaa.edu.cn E-mail:xthang@nuaa.edu.cn
  • 作者简介:李正洲,男,博士研究生。主要研究方向:飞机总体设计、高超声速飞行器。E-mail:aksu@nuaa.edu.cn;肖天航,男,博士,副教授。主要研究方向:飞机总体设计、计算流体力学。E-mail:xthang@nuaa.edu.cn;昂海松,男,硕士,教授。主要研究方向:飞机总体设计、微型飞行器与微系统。E-mail:ahs@nuaa.edu.cn;陆召严,男,博士研究生。主要研究方向:飞机总体设计。E-mail:luzhaoyan@nuaa.edu.cn
  • 基金资助:
    机械结构力学及控制国家重点实验室开放课题(1001-IZD15001-1505MCMS-0415G01)

Development of a generalized surface partition and projection system for missile radome

LI Zhengzhou, XIAO Tianhang, ANG Haisong, LU Zhaoyan   

  1. College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
  • Received:2015-12-21 Online:2016-12-20 Published:2016-06-29
  • Supported by:
    State Key Laboratory of Mechanics and Control of Mechanical Structures Open Topic Funding (1001-IZD15001-1505 MCMS-0415G01)

摘要: 根据导弹雷达罩频率选择表面(FSS)的设计要求,研究发展了一种通用的雷达罩曲面的分片、展开算法和相关应用软件系统。算法对任意C2连续曲面,以高斯曲率的绝对值对分片面积的积分与曲面总面积的比值作为曲面是否可展的评定参数,并以此为阈值对不可展开外形雷达罩曲面进行近似分片;使用构造十字基带展开法对分片展开为平面形状。在以上算法基础上,首先使用MFC开发了应用程序框架,并采用OpenGL显示雷达罩曲面的分片操作,最后对分片数据输出AutoCAD格式便于分片贴层材料的切割加工。某型非旋成体导弹头罩的算例表明本文发展的导弹雷达罩曲面分片与展开算法有较高的精度,满足工程设计要求。

关键词: 导弹, 雷达罩, 高斯曲率, 曲面分片, 计算机图形学

Abstract: To meet the technical requirements of missile radome frequency selective surface (FSS), a partition and projection system of radome surface was proposed and developed. Based on the study of approximate partition and projection of complex surface, the partition coefficient was defined as the ratio of the integration of the absolute value of Gaussian curvature to its area, and the controlling value for surface partition is the summation of partition coefficient of the accumulated surface elements; the surface partitions was projected into 2D shapes by using cross baseband expansion method. On the basis of the above algorithms and data operation, an application framework was developed by using MFC, and the surface data operation was visualized with OpenGL. The surface projection data can be exported into AutoCAD format for subsequent fabrication. A successful application for a missile radome surface demonstrates that, the partition/projection method has high accuracy and satisfies the design requirements.

Key words: missile, radome, Gaussian curvature, surface partition, computer graphics

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发