复杂产品系统模块化分解模型及应用研究

闫华锋; 仲伟俊

doi:10.13700/j.bh.1001-5965.2016.0272

复杂产品系统模块化分解模型及应用研究

doi: 10.13700/j.bh.1001-5965.2016.0272

闫华锋^1, ,,
仲伟俊²

1.
国网电力科学研究院, 南京 210003
2.
东南大学经济管理学院, 南京 211189

基金项目:

国家自然科学基金 71071033

详细信息

作者简介:
闫华锋, 男, 博士, 研究员级高级工程师。主要研究方向:复杂产品系统技术与应用、技术创新管理

通讯作者:
闫华锋, E-mail:yhf_sgga@163.com

中图分类号: F752.69
计量
- 文章访问数: 820
- HTML全文浏览量: 77
- PDF下载量: 571
- 被引次数: 0
出版历程
- 收稿日期: 2016-04-07
- 录用日期: 2016-05-13
- 网络出版日期: 2017-04-20

Modular decomposition model of complex product system and its application

YAN Huafeng^{1
, ,},
ZHONG Weijun²

1.
State Grid Electric Power Research Institute, Nanjing 210003, China
2.
School of Economics and Management, Southeast University, Nanjing 211189, China

Funds:

National Natural Science Foundation of China 71071033

More Information

Corresponding author: YAN Huafeng, E-mail:yhf_sgga@163.com

摘要

摘要:
模块化设计开发技术能够实现复杂产品系统（CoPS）的柔性制造，科学合理的模块化分解将会降低CoPS开发的管理难度和制造成本。在分析产品系统模块化理论的基础上，总结了CoPS的模块化处理流程，列举了CoPS的模块化分解原则，提出了CoPS的模块化分解程度的计算模型，研究并建立了系统模块化与企业绩效的相关性分析模型，并探索了模型的最佳应用实践。以电网广域监测分析控制系统（WARMAP）为例，论述了在影响因素众多的情况下，运用模块化分解模型进行计算后，WARMAP分解为4大功能模块，极大缩短了系统的研发周期，提高了研发质量，充分验证了模块化分解模型的有效性, 以期为企业产品模块化设计提供理论指导和决策借鉴。
- 复杂产品系统 (CoPS) /
- 创新研究 /
- 模块化设计 /
- 模块化分解模型 /
- 电网广域监测分析控制系统 (WARMAP)
Abstract:
Modular design and development technology can realize flexible manufacturing of complex product system (CoPS), but inappropriate modular decomposition will increase managerial difficulty and manufacturing cost. Based on the analysis of the product system modularization theory, this paper summarizes the modular processing flow of the complex product system, lists the modular decomposition principle of CoPS, proposes the modular decomposition model and modular-enterprise performance correlation analysis model, and then uses the wide area moniting analysis protection-control (WARMAP) system as an example. This paper discusses that calculation by the modular decomposition makes the wide-area monitoring and analysis control system of power grid is divided into four functional models under the complex condition, which greatly shortens the development cycle of WARMAP system, improves the quality of research and development, verifies the validity of the modular decomposition model, and provides theoretical guidance and decision-making reference for enterprise product modular design.
- complex product system (CoPS) /
- innovation research /
- modular design /
- modular decomposition model /
- wide area moniting analysis protection-control (WARMAP)

HTML全文

图 1 WARMAP概念设计流程

Figure 1. Conceptual design flow based on WARMAP

下载: 全尺寸图片幻灯片

图 2 WARMAP模块关系

Figure 2. Relationship of WARMAP modules

下载: 全尺寸图片幻灯片

参考文献(16)

[1]	SIMONH A.The architecture of complexity[J].Proceedings of the American Philosophical Society, 1962, 106(6):467-482.
[2]	HUANG C C.Overview of modular product development[J].Proceedings of the National Science Council, Republic of China, Part A:Physical Science and Engineering, 2000, 24(3):149-165.
[3]	STONE R B, WOOD K L, CRAWFORD R H.A heuristic method for identifying modules for product architectures[J].Design Studies, 2000, 21(1):5-31. doi: 10.1016/S0142-694X(99)00003-4
[4]	ZAMIROWSKI E, OTTO K.Identifying product family architecture modularity using functionand variety heuristics[C]//11th International Conference on Design Theory and Methodology, Lasvegas, 1999.
[5]	HOLLTT K.Identifying common modules for collaborative R&D[C]//POM2002 Meeting on Production and Operations Management, San Francisco, 2002:1-16.
[6]	陈劲, 桂彬旺.模块化创新:复杂产品系统创新机理与路径研宄[M].北京:知识产权出版社, 2007. CHEN J, GUI B W.Innovation of modularization:Research on innovation mechanism and approach of CoPS[M].Beijing:Intellectual Property Publishing House, 2007(in Chinese).
[7]	LAU ANTONIO K W, YAM R C M, TANG E.The impacts of product modularity on competitive capabilities and performance:An empirical study[J].International Journal of Production Economics, 2007, 105(1):1-20. doi: 10.1016/j.ijpe.2006.02.002
[8]	RODRIGUES A, ROCHA ARMADA M J.The valuation of modular projects:A real options approach to the value of splitting[J].Global Finance Journal, 2007, 18(2):205-227. doi: 10.1016/j.gfj.2006.10.002
[9]	BALDWIN C Y, CLARK K B.Design rules.Volume 1:The power of modularity[M].Cambridge:MIT Press, 2000.
[10]	王瑜, 任浩.模块化组织价值创新:内涵与本质[J].科学学研究, 2014, 32(2):282-288. http://www.cnki.com.cn/Article/CJFDTOTAL-KXYJ201402017.htm WANG Y, REN H.Value innovation of modular organization:Content and nature[J].Studies in Science of Science, 2014, 32(2):282-288(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-KXYJ201402017.htm
[11]	王瑜, 任浩.模块化组织价值创新:路径及其演化[J].科研管理, 2014, 35(1):150-156. http://www.cnki.com.cn/Article/CJFDTOTAL-KYGL201401019.htm WANG Y, REN H.Path and evolution of value innovation in modular organization[J].Science Research Management, 2014, 35(1):150-156(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-KYGL201401019.htm
[12]	齐建民, 钟军.模块化设计下的复杂产品成本测度研究[J].中国石油大学学报 (社会科学版), 2013, 29(3):13-17. http://www.cnki.com.cn/Article/CJFDTOTAL-SYSK201303002.htm QI J M, ZHONG J.A study of complex product cost measure under modular design[J].Journal of China University of Petroleum (Edition of Social Sciences), 2013, 29(3):13-17(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-SYSK201303002.htm
[13]	郏维强, 刘振宇, 刘达新, 等.基于模糊关联的复杂产品模块化设计方法及其应用[J].机械工程学报, 2015, 51(5):130-142. http://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201505017.htm JIA W Q, LIU Z Y, LIU D X, et al.Modular design method and application for complex product based on fuzzy correlation analysis[J].Journal of Mechanical Engineering, 2015, 51(5):130-142(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201505017.htm
[14]	陈建勋, 张婷婷, 吴隆增.产品模块化对组织绩效的影响:中国情境下的实证研宄[J].中国管理科学, 2009, 17(3):121-130. http://www.cnki.com.cn/Article/CJFDTOTAL-ZGGK200903017.htm CHEN J X, ZHANG T T, WU L Z.The effect of product modularity on organization performance:An empirical study in Chinese context[J].Chinese Journal of Management Science, 2009, 17(3):121-130(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-ZGGK200903017.htm
[15]	青木昌彦, 安藤晴彦. 模块时代——新产业结构的本质[M]. 周国荣, 译. 上海: 上海远东出版社, 2003. AOKI M, ANDO H.Module age-The nature of new industrial structure[M].ZHOU G R, translated.Shanghai:Shanghai Far East Publishers, 2003(in Chinese).
[16]	BALDWIN C Y, CLARK K B.Design rules:The power of modularity[M].Cambridge:MIT Press, 2000.