Pressure characteristics and control method of wind tunnel for sand and dust test
-
摘要: 砂尘环境试验风洞的压力调节方式不同于常规回流式风洞,为了研究风洞中压力变化的动态特性,进行合理分析与简化后,应用集总参数法建立起风洞压力控制点、试验段及加砂段压力变化的动态特性模型,给出了相应的控制策略.通过仿真试验得出不同扰动因素对压力分布的影响规律,在此基础上对砂尘环境试验风洞的压力控制系统进行了仿真研究.能够有效优化风洞结构、提高承压能力及确定各部件控制精度.Abstract: Pressure adjustment of wind tunnel for sand and dust test is different from general circumfluent one. In order to determine characteristics of pressure variation, dynamic model for controlling-pressure point, testing port andinjecting-sand-and-dust port was established, by the means of lumped parameter method(LPM) with physical analysis and simplification. Control method was offered according to the model. The rule that different disturbance effects on pressure distribution was observed, and control system of wind tunnel for sand and dust test was studied by the means of simulation. The results are satisfied. This work is important to optimize the configuration of the wind tunnel and to enhance its ability of sustaining pressure and is significant to ascertain the control precision for each component of the wind tunnel.
-
Key words:
- wind tunnel /
- pressure /
- sand and dust /
- characteristic /
- control method
-
[1] 吴荣林,王振羽.风洞设计原理[M].北京:北京航空学院出版社,1985.22~89 Wu Ronglin, Wang Zhenyu. Theory of wind tunnel design[M]. Beijing:Beijing College of Aeronautics Press, 1985.22~89(in Chinese) [2] Dong Zhibao, Wang Hongtao, Liu Xiaoping, et al. The blown sand flux over a sandy surface:a wind tunnel investigation on the fetch effect[J]. Geomorphology, 2004,57(1-2):117~127 [3] 李诗久,周晓君.气力输送理论与应用[M].北京:机械工业出版社, 1992.1~11 Li Shijiu, Zhou Xiaojun. Theory and application of pneumatic transport [M]. Beijing:Mechanical Industry Press,1992.1~11(in Chinese) [4] 胡传鼎. 通风除尘设备设计手册[M]. 北京:化学工业出版社,2003. 39~52 Hu Chuanding. Design handbook of ventilated and removing-dust equipment[M]. Beijing:Chemical Industry Press,2003.39~52(in Chinese) [5] 黄忠霖.控制系统MATLAB计算及仿真[M].北京:国防工业出版社, 2001.394~399 Hang Zhonglin. Control system MATLAB calculation and simulation [M]. Beijing:National Defence Industry Press, 2001. 394~399(in Chinese) -
点击查看大图
计量
- 文章访问数: 2790
- HTML全文浏览量: 264
- PDF下载量: 220
- 被引次数: 0
下载:
