Computer simulation of residual stress for cold rolling prestrectching board
-
摘要: 为消除铝板冷轧过程中产生的残余应力,采用弹塑性大变形有限元法对变形区内残余应力的分布进行数值模拟.通过分析不同轧制工况对残余应力分布的影响,得到不同压缩量对轧制残余应力的影响; 并对不同轧制工况后的板材进行参数拉伸,得到拉伸力大小、拉伸变形量大小对残余应力消除效果的影响值.模拟结果表明适当的拉伸(2%左右)可以均匀细化、部分消除残余应力,减小残余应力对后续加工的影响.Abstract: To eliminate the residual stress formed during the process of Al board cold rolling, the distribution of stress in the deformation region was stimulated by elas-plastics large deformation finite element analysis. Analyzing the effects towards residual stress from different rolling loadcase, the value of cold rolling residual stress caused by different compress was gotten; Analyzing parameters stretching toward different rolling loadcase board, the effect of the residual stress elimination influenced by stretching force and stretching deformation was figured out. The simulative results show that the method of the proper stretching (about 2%) can evenly and partly eliminate the residual stress, reduce the effect toward the following manufacture induced by the residual stress.
-
Key words:
- residual stress /
- plastic deformation /
- rolling /
- compress /
- stretch
-
[1] 米谷茂.残余应力的产生和对策[M].北京:机械工业出版社，1983.210～214Mi Gumao.The produce and conternmeasure of residual stress[M].Beijing:China Machine Press,1983.210～214(in Chinese) [2] 毛翔.铝合金预拉伸板残余应力的有限元数值模拟计算[J].轻金属,1999,(5):50～52Mao Xiang.Finite element stimulate calculation of aluminum alloy prestretch residual stress[J]. Light Metal,1995,(5):50～52(in Chinese) [3] 方博武.金属冷热加工的残余应力[M].北京:高等教育出版社,1991.84～86Fang Bowu. Residual stress of metal coldthermal manufacture[M].Beijing:China Higher Education Press,1991.84～86(in Chinese) [4] 李宵,李栋才.超载拉伸消除焊接残余应力的计算机模拟[J].西安石油学院学报,1999，14(2):46～49Li Xiao, Li Dongcai. Computer stimulation of removing welding residual stress by over load tension[J]. Journal of Xi'an Petroleum University,1999，14(2):46～49(in Chinese) [5] 孙建中.X射线法测定预拉伸铝合金板材表面残余应力[J].轻金属，1998，(6)：51～53Sun Jianzhong. X ray method measures the surface residual stress of prestretching aluminum alloy board[J]. Light Metal, 1998,(6): 51～53(in Chinese) [6] 胡华南,周泽华,陈澄洲.预应力加工表面残余应力的理论分析[J].华南理工大学学报(自然科学版)，1994，22(2):1～9Hu Huanan, Zhou Zehua, Chen Chengzhou. A theoretical analysis of the residual stress in prestress maching[J]. Journal of South China University of Technology(Natural Science Edition),1994，22(2)：1～9(in Chinese) [7] 李钧泽,李金瀛.轧制不锈钢板材残余应力的测定[J].水利电力机械,1994，(5):2～10Li Junze, Li Jinying. The measuration of the residual stress in rolled stainless steel[J].Irrigation Electric Machine, 1994,(5):2～10(in Chinese) -
点击查看大图
计量
- 文章访问数: 3069
- HTML全文浏览量: 193
- PDF下载量: 1271
- 被引次数: 0
下载:
