Design of Switched-Capacitor Filters Using Signal-Flow Graphs and General Integrator
-
摘要: 阐明了用信号流图和开关电容通用积分器设计开关电容低通滤波器的方法.本设计方法简明直观,物理概念清楚,便于掌握,容易推广到其它类型(如高通、带通等)开关电容滤波器的设计.文中通过一个五阶梯形开关电容滤波器的设计实例加以说明,并采用通用电路分析程序PSpice5.0来验证设计,结果表明文中提出的方法是一种设计开关电容滤波器的有效方法.Abstract: A new design method of switched-capacitor low-pass filter using signal-flow graphs and the general integrator is presented. The method is of simplicity, clear physical concept and convenience for use . It can also be applied easily to the design of other kinds of SCF(Switched-Capacitor Filter)(e.g. high-pass and band-pass etc). An example is given to show the design of a fifth-order ladder SCF,and the general-purpose circuits simulation programs Pspice5.0 is used to verify the design. It shows that the design method based on SFG(Signal Flow Graphs) and the general switched-capacitor integrator is efficient.
-
1. Gray P R,Senderowicz D, Ohara H. A single-chip NMOS dual channel filter for PCM telephony applications. IEEE J Solid-State Circuits, 1979,14(6):981~991 2. 程代伟. 模拟集成滤波器设计:开关电容(SC)和开关电流(SI):[学位论文].北京:北京航空航天大学机电工程系,1998 3. Laker K R, Sansen W M C. Design of analog integrated circuits and system. New York :McGraw-Hill, 1994 4. 黄席椿,高顺泉. 滤波器综合法设计原理.北京:人民邮电出版社,1978 -
点击查看大图
计量
- 文章访问数: 2854
- HTML全文浏览量: 250
- PDF下载量: 416
- 被引次数: 0
下载:
