High Speed Machining of Grey Cast Iron Using CBN Tools
-
摘要: 研究了CBN刀具高速切削灰铸铁时的刀具前、后刀面磨损、耐用度以及富氧气氛对切削性能的影响,所用的灰铸铁具有不同的铁素体、珠光体比例,最高切削速度达1＇100 m/min.研究表明Amborite刀具的刀尖磨损略大于BZN6000刀具,在较低速度下加工以铁素体为主的灰铸铁时更容易发生月牙洼磨损;BZN6000刀具以700 m/min的切削速度加工铁素体含量较高的灰铸铁时耐用度较高,Amborite刀具的耐用度随切削速度而升高;在富氧气氛中切削可以减轻刀具磨损,这一效果对BZN6000刀具更为显著.文章中对这些现象的原因进行了讨论.Abstract: The cutting performance of CBN tools when machining grey cast iron with different pearlite/ferrite ratio at high cutting speed up to 1100 m/min was investigated concerning tool flank and crater wear,tool life and the influence of oxygen rich atmosphere.It was found that nose wear of Amborite was slightly greater than that of BZN6000 and craters were more likely to occur on the tools machining high ferrite iron at low cutting speed.BZN6000 achieved longest tool life at the cutting speed of 700 m/min when machining workpieces with high ferrite content,while the tool life of Amborite increased consistently with the increase of cutting speed when machining high pearlite cast iron.Cutting in the oxygen rich atmosphere could reduce tool wear and the effect was more significant with BZN6000 tools.The explanations for the phenomena were discussed.
-
Key words:
- cubic boron nitride cutting tools /
- cutting tests /
- wear /
- cast iron
-
1.Ballinger B R.CBN inserts bore soft cast iron.American Machinist,Oct,1985:90~91 2. Haldin O,Kartunen A,Prub P.Finishing grey cast iron with DBC 80.Industrial Diamond Review,1993,(4):187~189 3. Prokop J.Finish machining of bores in grey cast iron.Industrial Diamond Review,1982,42 (488): 26~28 4. Heath P J.Properties and uses of Amborite.Industrial Diamond Review,1986,46 (514): 120~127 5. International Organization for Standardization.Tool-life testing with single point turning tools.ISO 3685:1993(E),1993 6. Chen W.The machining of hardened steel using superhard CBN tooling and CBN tipped rotary cutting tools:[dissertation].England: Univ of Birmingham,1993 7. Trent E M.Metal cutting.2nd ed.London:Butterworths & Co (Publishers) Ltd,1984 8. Dearnly P A.A metallurgical evaluation of tool wear and chip formation when machining pearlite grey cast irons with dissimilar graphite morphologies.Wear,1985,101: 33~68 9. Robinson P H.Machinability tests on grey cast iron using CBN,whisker-reinforced ceramics and an oxygen rich atmosphere: [dissertation].England: Univ of Birmingham,1988 10. 周泽华.金属切削原理.上海:上海科技出版社,1984 -
点击查看大图
计量
- 文章访问数: 2339
- HTML全文浏览量: 23
- PDF下载量: 1575
- 被引次数: 0
下载:
