三维发动机进气道水滴撞击特性分析

申晓斌; 林贵平; 杨胜华

三维发动机进气道水滴撞击特性分析

北京航空航天大学航空科学与工程学院, 北京 100191

详细信息

作者简介:
申晓斌(1985-),男,湖南怀化人,博士生,sxb762@163.com.

中图分类号: V 233.94
计量
- 文章访问数: 5220
- HTML全文浏览量: 279
- PDF下载量: 1213
- 被引次数: 0
出版历程
- 收稿日期: 2009-11-13
- 网络出版日期: 2011-01-31

Analysis on three dimensional water droplets impingement characteristics of engine inlet

School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 用带数值扩散项的欧拉法对某型三维发动机进气道水滴撞击特性进行了研究.实现了可压流场中三维复杂形体的局部水滴收集系数的计算.数值扩散项的引入解决了欧拉法计算产生奇异结果发散的问题.通过对不同进气道流量的算例结果的比较,发现进气道流量对进气道唇口附近的水滴撞击区和撞击量都有影响.进气量大,最大局部水滴收集系数也大.通过对有无整流罩的计算结果进行比较,发现此型发动机整流罩对水滴撞击特性的影响很小.
- 发动机 /
- 水滴撞击特性 /
- 欧拉法 /
- 流量 /
- 整流罩
Abstract: Droplets impingement characteristics of a certain 3D engine inlet were analyzed using an Eulerian method with numerical diffusion. Calculation of 3D complex body’s local droplet collection efficiency was conducted in the compressible flow field. With numerical diffusion, the problems of singularity and divergence were solved. Cases of different mass flow rates were calculated with and without cowling. Results show that mass flow rate influents on the impinging area and amount around engine inlet lip. The bigger is engine mass flow rate, the larger is the maximum local droplet collection efficiency. The results also show that the influence of cowling on this engine-s impingement characteristics is very small in these cases.
- engines /
- droplets impingement characteristics /
- Eulerian method /
- flow rate /
- cowling

HTML全文

参考文献(1)

[1] 裘燮纲,韩凤华.飞机防冰系统[M].北京:航空专业教材编审组,1985:50-53 Qiu Xiegang,Han Fenghua.Aircraft anti-icing system[M] .Beijing:Compilation and Examination Group of Aero Specialized Teaching Materials,1985:50-53(in Chinese) [2] 常士楠,艾素霄.飞机发动机进气道防冰系统的设计计算[J].北京航空航天大学学报,2007,33(6):649-652 Chang Shinan,Ai Suxiao.Design and calculation for the anti-icing system of an aircraft engine inlet [J].Journal of Beijing University of Aeronautics and Astronautics,2007,33(6):649-652(in Chinese) [3] Wright W B.User manual for the NASA Glenn ice accretion code LEWICE version 2.2.2 .NASA-CR-2002-211793,2002 [4] 卜雪琴,林贵平.防冰热载荷计算的一种新方法[J].航空学报,2006,27(2):208-212 Bu Xueqin,Lin Guiping.New method for calculation of anti-icing heat loads[J].Acta Aeronautica et Astronautica Sinica,2006,27(2):208-212(in Chinese) [5] Sutikno Wirogo,Shashidhar Srirambhatla.An Eulerian method to calculate the collection efficiency on two and three dimensional bodies .AIAA 2003-1073,2003 [6] Tong X T,Luke E A.Eulerian simulations of icing collection efficiency using a singularity diffusion model .AIAA 2005-1246,2005 [7] Bidwell C S.Collection efficiency and ice accretion calculation for a sphere,a swept MS(1)-317 wing,a swept NACA-0012 wing tip,an axisymmetric inlet,and a Boeing 737-300 inlet .AIAA-95-0755,1995 [8] Al-Khalil K,Hitzigrath R,Philippi O,et al.Icing analysis and test of a business jet engine inlet duct .AIAA 2000-1040,2000 [9] Fluent Inc.FLUENT 6.3 UDF manual[M].Pennsylvania,USA:Fluent Inc,2006 [10] 杨胜华,林贵平,申晓斌.三维复杂表面水滴撞击特性计算[J].航空动力学报,2010,25(2):284-290 Yang Shenghua,Lin Guiping,Shen Xiaobin.Water droplet impingement prediction for three-dimensional complex surfaces[J].Journal of Aerospace Power,2010,25(2):284-290(in Chinese)

施引文献

资源附件(0)

访问统计