惯性平台在系统中多位置翻滚自标定方法

包为民; 申功勋; 李华滨

惯性平台在系统中多位置翻滚自标定方法

北京航空航天大学宇航学院, 北京 100191

详细信息

作者简介:
包为民(1960-),男,浙江镇海人,博士生,baoweimin@163.com.

中图分类号: V 44
计量
- 文章访问数: 3295
- HTML全文浏览量: 59
- PDF下载量: 910
- 被引次数: 0
出版历程
- 收稿日期: 2010-05-22
- 网络出版日期: 2011-04-30

Investigation on inertial platform multi-position rolling self-calibration

北京航空航天大学宇航学院, 北京 100191

摘要

摘要: 影响惯性制导导弹命中精度的主要因素是制导工具误差,而平台的测量误差是其中的主要成分.深入研究惯性平台在系统中的在线标定方法,建立了惯性平台的陀螺仪误差模型及加速度表误差模型,提出了最优多位置翻滚试验方法,通过惯性平台多位置翻滚自标定仿真试验分析了自标定精度的影响因素.仿真结果表明,该方法能有效分离各误差系数,绝大多数误差系数分离精度优于99%,从而提高了导弹的命中精度.
- 惯性平台 /
- 多位置翻滚 /
- 自标定 /
- 试验设计
Abstract: The guidance instrument errors are the main factors of reducing the hitting accuracy of inertial-guided missile. The measuring error of inertial platform is the major part. So the multi-position rolling self-calibration approach for inertial platform was studied. The gyroscope error models and the accelerometer error models were firstly built, and multi-position rolling self-calibration test was designed. Based on the scheme, numerical multi-position rolling self-calibration simulations were conducted, and influence factors were anglicized. Simulation results show that this approach can effectively separate the error coefficients. Under normal locked errors, the error coefficients separation precision is better than 99%, accordingly, the hitting accuracy of missile is increased.
- inertial platform /
- multi-position rolling /
- self-calibration /
- test design

HTML全文

参考文献(1)

[1] Cai T.Study on the rate azimuth platform inertial navigation system [J]J of Southeast University,2004,35(1):29-32 [2] 斯朱森,蔡宗平.导弹惯性平台射前自标定技术[J].弹箭与制导学报,2007,27(1):48-49 Si Zhusen,Cai Zongping.A New calibration scheme for inertial platform[J].Journal of Projectiles,Rockets,Missiles and Guidance,2007,27(1):48-49(in Chinese) [3] 董燕琴,王玉森,安维廉,等.平台自标定数据有效性评估方法研究[J].航天控制,2009,27(1):85-88 Dong Yanqin,Wang Yusen,An Weilian,et al.Research on methods of evaluating the validity of platform self-calibration data [J].Aerospace Control,2009,27(1):85-88(in Chinese) [4] 胡昌华,郑建飞,李进,等.非全姿态惯性平台小角度射前自标定方法[J].宇航学报,2008,29(1):192-196 Hu Changhua,Zheng Jianfei,Li Jin,et al.Self-calibration for the non-full gesture inertial platform before launch under small angle [J].Journal of Astronautics,2008,29(1):192-196(in Chinese) [5] Zhao W,Liu J.The design method of sliding mode controller with integral compensation [J].Journal of System Simulation,2004,16(9):2344-2346 [6] Link T,Simon I,Trachtler M,et al.A new self-test and self-calibration concept for micromachined gyroscopes //The 13th International Conference on Solid State Sensors,Actuators and Microsystems.Seoul,Korea: ,2005:401-404 [7] 杨华波,蔡洪,张士峰.高精度惯性平台误差自标定方法[J].上海航天,2006,23(2):33-36 Yang Huabo,Cai Hong,Zhang Shifeng.Calibration for the errors of a high accurate inertial platform[J].Aerospace Shanghai,2006,23(2):33-36(in Chinese)

施引文献

资源附件(0)

访问统计