三床机载制氧系统性能仿真及影响因素分析

王慧丹; 林贵平; 王亮; 方玲

三床机载制氧系统性能仿真及影响因素分析

1.
北京航空航天大学航空科学与工程学院, 北京 100191
2. 中航工业合肥江航飞机装备有限公司,合肥 230051

详细信息

作者简介:
王慧丹(1982-),女,河北石家庄人,博士生,danny@ase.buaa.edu.cn.

中图分类号: V 245.3⁺1
计量
- 文章访问数: 2911
- HTML全文浏览量: 30
- PDF下载量: 807
- 被引次数: 0
出版历程
- 收稿日期: 2011-01-07
- 网络出版日期: 2011-06-30

Simulation on performance and effects of parameters analysis on three-bed OBOGS

1.
School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China
2. AVIC HeiFei Jianghang Aircraft Equipment Corporation LTD, Hefei 230051, China

摘要

摘要: 建立了三床机载分子筛制氧系统的数学模型,对系统性能进行仿真.仿真结果与实验值进行了对比,两者吻合较好,验证了模型和求解的正确性.在此基础上,对不同飞行高度和工作条件下系统的性能进行仿真预测,研究了产品气流量、吸附压力、冲洗定径孔大小和循环时间对系统工作性能的影响,为三床机载分子筛制氧系统的设计和优化提供了依据.
- 空气分离 /
- 机载制氧系统 /
- 变压吸附
Abstract: A set of mathematical models was built and utilized to simulate the performance of three-bed on-board oxygen generation system (OBOGS). Then the results of simulation were compared with the data from experiments and the good agreements were obtained to validate the models and simulation process. Based on the validated simulation, the performance of the OBOGS at different flight altitudes and in different operation conditions were predicted by simulation, and effects of some design and operation parameters such as product flow rate, feed pressure, purge orifice size and cycle time were investigated. It provides a guidance of design and optimization for three-bed OBOGS.
- air separation /
- on-board oxygen generation system(OBOGS) /
- pressure swing adsorption

HTML全文

参考文献(1)

[1] Haigh F.A new concept in life support systems the NGL molecular sieve oxygen generator[J].Aircraft Engineering and Aerospace Technology,1993,54(1):8-27 [2] Teague K G Jr,Edgar T F.Predictive dynamic model of a small pressure swing adsorption air separation unit[J].Ind Eng Chem Res,1999,38(10):3761-3775 [3] 肖华军.英国机载分子筛制氧系统简介[J].中华航空医学杂志,1994,5(3):183-186 Xiao Huajun.Development of molecular sieve oxygen generating system on aviation medicine[J].Chinese Journal of Aviation Medicine,1994,5(3):183-186 (in Chinese) [4] 肖华军,袁修干.机载分子筛制氧技术发展的现状与动向[J].航空科学技术,1997(1):26-28 Xiao Huajun,Yuan Xiugan.Current state and trend of molecular screen oxygen making[J].Aeronautical Science and Technology,1997(1):26-28 (in Chinese) [5] 孙兵,肖华军,袁修干,等.分子筛氧气浓缩器产氧性能实验分析[J].北京航空航天大学学报,2003,29(1):46-49 Sun Bing,Xiao Huajun,Yuan Xiugan,et al.Experiments on performance of a molecular sieve oxygen concentrator system[J].Journal of Beijing University of Aeronautics and Astronautics,2003,29(1):46-49 (in Chinese) [6] 张辉,刘应书,翟晖,等.机载氧源在航空领域的应用与发展趋势[J].低温工程,2008(4):61-66 Zhang Hui,Liu Yingshu,Zhai Hui,et al.Applications and development tendencies of onboard oxygen generating systems in aviation field[J].Cryogenics,2008(4):61-66 (in Chinese) [7] Lovett N P J,Ashdown R.Development of the OBOGS and BRAG valve for the F-22 life support system[C]//Proceedings of SAFE 36th Annual Symposium.Phoenix:Safe Association,1998:62-71 [8] Ruthven D M,Farooq S,Knaebel K S.Pressure swing adsorption[M]. New York:VCH Publishers,1994 [9] 杨锋,林贵平,赵竞全.分子筛浓缩器非等温吸附模型[J].北京航空航天大学学报,2002,28(1):8-11 Yang Feng,Lin Guiping,Zhao Jingquan.Non-isohermal adsorption model for molecular sieve oxygen concentrator (MSOC) [J].Journal of Beijing University of Aeronautics and Astronautics,2002,28(1):8-11(in Chinese) [10] Wu Yan,Lin Guiping.Modeling and numerical simulation of onboard molecular sieve oxygen generation system[J].Transactions of Nanjing University of Aeronautics and Astronautics,2004,21 (1):47-52 [11] Farooq S,Ruthven D M,Boniface H A.Numerical simulation of a pressure swing adsorption oxygen unit[J].Chem Eng Sci,1989,44(12):2809-2816 [12] Santos J C,Portugal A F,Magalbaes F D,et al.Simulation and optimization of small oxygen pressure swing adsorption units[J].Ind Eng Chem Res,2004,43(26):8328-8338 [13] Agha R K,Weireld G D,Frere M.A complete set of experimental devices for the determination of the gas separation capacity of adsorbents[J].Adsorption,2005,11(Supplement 1):179-182 [14] Santos J C,Magalhaes F D,Mendes A.Contamination of zeolites used in oxygen production by PSA:effects of water and carbon dioxide[J].Ind Eng Chem Res,2008,47(16):6197-6203 [15] Arvind R,Farooq S,Ruthven D M.Analysis of a piston PSA process for air separation[J].Chem Eng Sci,2002,57(3):419-433 [16] Yang R T.Gas separation by adsorption processes[M].Boston:Butterworth,1987 [17] Jee J G,Lee J S,Lee C H.Air separation by a small-scale two-bed medical O₂ pressure swing adsorption[J].Ind Eng Chem Res,2001,40(16):3647-3658 [18] Masoud M,Jafar T,Leila F.Oxygen separation from air by four-bed pressure swing adsorption[J].Ind Eng Chem Res,2009,48(11):5439-5444 [19] Chou C T,Huang W C.Simulation of a four-bed pressure swing adsorption process for oxygen enrichment[J].Ind Eng Chem Res,1994,33(5):1250-1258

施引文献

资源附件(0)

访问统计