薄壁精密罐多道次缩口过程及其机理

陈汇; 郎利辉; 杜传军; 罗晓亮

薄壁精密罐多道次缩口过程及其机理

1.
北京航空航天大学机械工程及自动化学院, 北京 100191
2. 宝山钢铁股份有限公司技术中心, 上海 201900

详细信息

中图分类号: TG 386.3
计量
- 文章访问数: 2926
- HTML全文浏览量: 74
- PDF下载量: 914
- 被引次数: 0
出版历程
- 收稿日期: 2010-07-08
- 网络出版日期: 2011-07-30

Multi-stages necking process and mechanism of precision thin-walled can

1.
School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China
2. R&D Center, Baoshan Iron & Steel Co., LTD, Shanghai 201900, China

摘要

摘要: 基于薄壁精密罐的多道次缩口工艺,分析了各道次缩口材料的变形行为,对首道次缩口与后续道次缩口进行区分,给出在不同道次缩口中缩口入模角的定义,探讨了各道次间缩口行程的控制规律,并利用有限元数值模拟进行了验证,采用专用实验设备所获得的实验结果也证实了该规律,决定了不同道次解析分析的基础不同;基于主应力法推导出了不同道次缩口载荷计算公式,证实各道次缩口工艺中最佳入模角的存在,载荷计算结果与实验结果较为吻合,并计算得出缩口载荷随凹模入模角的变化规律.
- 缩口 /
- 载荷 /
- 主应力法 /
- 最佳入模角
Abstract: Based on the multi-stages necking process of the precision thin-walled can, the deformational behavior of the material in each stage necking process was analyzed, the first necking process and the subsequent necking process was distinguished, and the definition of the die angle was given out. The control law of necking stroke in each process was investigated and verified by utilizing numerical simulation. The experiment results using a special equipment were obtained, which indicate the diverse analytical basement between different necking process. The load computational formula of different necking stages were derived based on slab method, indicate the existence of optimal die angle in each necking process. The calculated load results coincide with the experimental results, and the change of the necking load along with variation of die angle was obtained.
- necking /
- loads /
- slab method /
- optimal die angle

HTML全文

参考文献(1)

[1] Almeida B P P,Alves M L,Rosa P A R,et al.Expansion and reduction of thin-walled tubes using a die: Experimental and theoretical investigation[J].International Journal of Machine Tools and Manufacture,2006,46(12/13):1643-1652 [2] Alves L M,Martins P A F.Cold expansion and reduction of thin-walled PVC tubes using a die[J].Journal of Materials Processing Technology,2009,209(9):4229-4236 [3] 夏巨湛,王英,胡国安,等.薄壁管缩径挤压工艺的模拟分析与应用[J].石油机械,1997,25(3):18-21 Xia Juchen,Wang Ying,Hu Guoan,et al.Simulation and application of extrusion-sinking technology for thin-walled tube[J].CPM,1997,25(3):18-21(in Chinese) [4] Alves M L,Almeida B P P,Rosa P A R,et al.End forming of thin-walled tubes[J].Journal of Materials Processing Technology,2006,177(1/2/3):183-187 [5] Fatnassi A,Tomita Y,Shindo A.Non-axisymmetric wrinkling behavior of elastic-plastic circular tubes subjected to a nosing operation [J].International Journal of Mechanical Science,1985,27(10):643-651 [6] Jin Zhu.A new approach to preform design in shell nosing[J].Journal of Materials Processing Technology,1997,63(1/2/3):640-644 [7] Kim Youngsuk,Son Youngjin.Study on wrinkling limit diagram of anisotropic sheet metals[J].Journal of Materials Processing Technology,2000,97(1/2/3):88-94 [8] Reid S R,Harrigan J J.Transient effects in the quasi-static and dynamic internal inversion and nosing of metal tubes[J].International Journal of Mechanical Sciences,1998,40(2/3):263-280 [9] Lu Yuunghwa.Study of preform and loading rate in the tube nosing process by spherical die [J].Computer Methods in Applied Mechanics and Engineering,2005,194(25/26):2839-2858 [10] Avitzur B.Handbook of metal-forming process[M].New York:John Wiley & Sons,1983 [11] Alves L M,Pardal T C D,Martins P A F.Forming of thin-walled hollow spheres using sacrificial polymer mandrels[J].International Journal of Machine Tools and Manufacture,2009,49 (6):521-529

施引文献

资源附件(0)

访问统计