Steady state circular performance simulation of automobile based on orthogonal test
-
摘要: 虚拟仿真技术与正交试验设计方法的结合可为汽车产品的开发提供新思路.对汽车稳态回转性能进行研究时,可在多体动力学仿真软件ADAMS(Automatic Dynamic Analysis of Mechanical Systems)中建立汽车虚拟样机模型,利用正交试验设计方法对试验方案进行合理设计,按照设计好的试验方案在ADAMS中进行仿真,通过对试验数据进行必要的处理与分析可得最优试验方案和各试验因素的影响程度.经分析可知,对汽车稳态回转性能影响较大的4个因素按影响程度排序依次为质心前后位置、前后轮胎的侧偏刚度、质心高度、前螺旋弹簧刚度.Abstract: The perfect combination of virtual simulation technology and orthogonal experimental design methods provides a new idea for the automotive product development. The research of steady state circular performance of automobile can follow the following steps. A virtual prototype model of a car was established in multi-body dynamics simulation software automatic dynamic analysis of mechanical systems(ADAMS); The testing program was reasonably designed using orthogonal experimental design methods; Some simulation tests were carried out in ADAMS following the designed testing program; The optimal testing program and the influence degree of every factor were elicited after the test data being calculated and analyzed. The results show that the four factors which have considerable influence to the steady state circular performance of automobile are the location of mass center in lengthwise, the cornering stiffness of front and rear tires, the height of mass center, the stiffness of front spiral spring, according to the order of influence degree.
-
Key words:
- orthogonal test /
- steady state circular performance /
- virtual prototype /
- testing program
-
[1] 张云清,项俊,孙营,等.基于正交试验的虚拟样车平顺性分析及参数选择[J].汽车技术,2005(10):14 Zhang Yunqing,Xiang Jun,Sun Ying,et al.Analysis of ride comfort and preferences of virtual prototype based on orthogonal test[J].Automobile Technique,2005(10):14 (in Chinese) [2] 陈魁.试验设计与分析[M].2版.北京:清华大学出版社,2005:73-78 Chen Kui.Experimental design and analysis[M].2nd ed.Beijing:Tsinghua University Press,2005:73-78 (in Chinese) [3] QC/T 480-1999 汽车操纵稳定性指标限值与评价方法[S] QC/T 480-1999 Criterion thresholds and evaluation of controllability and stability for automobiles[S](in Chinese) [4] Mousseau C W,Laursen T A,Lidberg M,et al.Vehicle dynamics simulations with coupled multibody and finite element models[J].Finite Elements in Analysis and Design,1999,31(4):295-315 [5] Mitisuhiro M.An application of suspension Kine Matics for intermediate level vehicle handing simulation[J].JSAE Review,1999(20):471-477 [6] Hiroyuki G,Takao S.Handling and stability analysis system using ADAMS/Car[J].Suzuki Tech Rev,2002,28:11-14 [7] GB/T 6323.6-94 汽车操纵稳定性试验方法——稳态回转试验[S] GB/T 6323.6-94 Controllbility and stability test procedure for automobiles—steady static circular test procedure[S](in Chinese) -
点击查看大图
计量
- 文章访问数: 2938
- HTML全文浏览量: 204
- PDF下载量: 1029
- 被引次数: 0
下载:
