Improved analysis method of risk priority number
-
摘要: 针对工艺故障模式影响分析(PFMEA,Process Failure Modes and Effects Analysis)中风险优先数(RPN,Risk Priority Number)分析方法存在的缺陷,在分析导致这些缺陷的原因的基础上,提出了一种基于费用及发生概率的定性与定量相结合的RPN分析方法.该方法中定性分析部分以传统RPN分析方法中的严酷度等级评价为基础,对工艺故障模式的严酷度等级进行评价;定量分析部分以故障模式发生后导致的费用损失的期望值作为RPN值.改进后的RPN分析方法中,定量化的数据使得风险排序更为客观、准确.最后,使用改进后的RPN分析方法对相控阵雷达中某组件的滤波器装配工艺进行了PFMEA分析,取得了良好的效果.
-
关键词:
- 风险优先数 /
- 工艺故障模式影响分析 /
- 费用 /
- 概率
Abstract: Aiming at the defect of traditional risk priority number(RPN) method in process failure modes and effects analysis(PFMEA),the reasons of the defect thoroughly were analyzed, and a new RPN ranking method based on cost and probability was presented which is combined qualitative analysis with quantitative analysis. In the qualitative analysis , which is based on the estimation of severity ranking in the traditional risk priority number method, the severity ranking of the process failure mode was estimated. In the quantitative analysis, it used the expected cost caused by the failure mode as the risk priority number. The improved RPN method uses the quantitative numbers to make the ranking result of the RPN more objective and accurate. Finally, the new RPN method was applied to the PFMEA of the filter assemblage of a module in the modern radar, and a great result is obtained.-
Key words:
- risk priority number /
- process failure modes and effects analysis /
- cost /
- probability
-
[1] GJB/Z1391-2006 故障模式、影响及危害性分析指南[S] GJB/Z1391-2006 Guide to failure mode,effects and critically analysis[S](in Chinese) [2] 王贵宝,黄洪钟,张小玲.风险可能数——一种基于最大信息熵理论的风险度量和风险排序新方法[J].航空学报,2009,33(9):1683-1690 Wang Guibao,Huang Hongzhong,Zhang Xiaoling.Risk possib-ility number—a dew model for risk evaluation and priorit-ization based on maximum entropy theory[J].Acta Aeronautica et Astronautica Sinica,2009,33(9):1683-1690(in Chinese) [3] Childs Joseph A.Turning multiple PFMECA results into an optimal action plan// Proceedings Annual Reliability and Maintainability Symposium.Fort Worth,USA:IEEE,2009:412-416 [4] Kai Meng Tay.On fuzzy inference system based failure mode and effect analysis (FMEA) methodology// 2009 International Conference of Soft Computing and Pattern Recognition.Ayer Keroh,Malaysia:IEEE,2009:329-334 [5] Bowles John B.An assessment of RPN prioritization in a fail-ure modes effects and criticality analysis//Proceedings Annual Reliability and Maintainability Symposium.Tampa Flor-ida:IEEE,2003:380-386 [6] 胡玺良,张代胜.探析基于寿命成本的FMEA [J].现代机械,2007(1):4-7 Hu Xiliang,Zhang Daisheng.The exploration of FMEA based on life cost[J].Modern Machinery,2007(1):4-7(in Chinese) [7] Kmenta Steven,Kosuke Ishii.Scenario-bases FMEA:a life cycle cost perspective// 2000 ASME Design Engineering Technical Conferences.Baltimore,Maryland:ASME,2000:10-14 [8] Niu Yumei.The optimization of RPN criticality analysis meth-od in FMECA// International Conference on Apperceiving Computing and Intelligence Analysis(ICACIA2009).Chengdu,China:IEEE,2009:166-170 [9] 康锐.石荣德.FMECA技术及其应用[M].北京:国防工业出版社,2006:88-101 Kang Rui,Shi Rongde.FMECA technique and application [M].BeiJing:National Defense Industry Press,2006:88-101(in Chinese) [10] Iranmanesh H,Jalili M,Pirmoradi Z.Developing a new struct-ure for determining time risk priority using risk breakdown matrix in EPC projects// 2007 IEEE International Conference on Industrial Engineering and Engineering Management.Singa-pore :IEEE,2007:999-1003 -
点击查看大图
计量
- 文章访问数: 5676
- HTML全文浏览量: 121
- PDF下载量: 647
- 被引次数: 0
下载:
