脉冲红外相位线性调频Z变换

马说邯; 马齐爽

脉冲红外相位线性调频Z变换

北京航空航天大学自动化科学与电气工程学院, 北京 100191

基金项目: 国家自然科学基金资助项目(60879014)

详细信息

作者简介:
马说邯(1982-),男,河北邯郸人,博士生,mashuohan@asee.buaa.edu.cn.

中图分类号: TN 21
计量
- 文章访问数: 2926
- HTML全文浏览量: 44
- PDF下载量: 715
- 被引次数: 0
出版历程
- 收稿日期: 2010-11-05
- 网络出版日期: 2011-11-30

Pulse phase thermography chirp Z transform

School of Automation Science and Electrical Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 为了解决脉冲相位法(PPT,Pulse Phase Thermography)在处理红外检测数据时频率分辨率不够的问题,提出了一种新型的频域变换方法.利用快速傅里叶变换(FFT,Fast Fourier Transform)选择出包含特征频率的窄频带,对其进行线性调频Z变换(CZT,Chirp Z Transform),得到细化的频率结构.并将逐点像素分析后的结果重构出清晰的幅值和相位图像序列.在不增加采样时间的前提下获得了比PPT更高的频率分辨率.通过对铝制材料试件检测信号的对比分析,结果表明该算法可以对选频带进行有效细化,得到更精确的特征频率,有效降低了频谱泄露造成的误差.
- 热像 /
- 无损检测 /
- 图像处理 /
- 频谱分析
Abstract: In order to solve the problem of insufficient frequency resolution, occurring at the infrared detection data processing by the pulse phase thermography (PPT), a new frequency domain transform method was proposed. The fast Fourier transform (FFT) was utilized to choose the narrow frequency band included within the characteristic frequency, this band was processed by the chirp Z transform (CZT), the refined frequency structure was obtained. The clear amplitude and phase image sequences were reconstructed from the pixel-by-point analysis results. Without increasing the sampling time, a higher frequency resolution was achieve than the one of the PPT. Through the comparison of the detection signal from an aluminum material specimen, the results show that the algorithm can effectively refine the selected frequency band, get more precise characteristic frequency and effectively reduce the spectral leakage errors.
- thermography /
- nondestructive examination /
- image processing /
- spectrum analysis

HTML全文

参考文献(1)

[1] Omar M A,Zhou Y.A quantitative review of three flash thermography processing routines[J].Infrared Phys Techn,2008,51(4):300-306 [2] Hung M Y Y,Chen Y S,Siu P N,et al.Review and comparison of shearography and pulsed thermography for adhesive bond evaluation[J].Opt Eng,2007,46(5):51007-51016 [3] Galmiche F,Leclerc M,Maldague X.Time aliasing problem in pulsed phased thermography[C]//Rozlosnik A,Dinwiddie R.Thermosense XXⅢ.Orlando,FL:SPIE,2001:550-553 [4] Maldague X,Marinetti S.Pulse phase infrared thermography[J].Journal of Applied Physics,1996,79(5):2694-2698 [5] Ibarra-Castanedo C,Galmiche F,Darabi A,et al.Thermographic nondestructive evaluation:overview of recent progress[C]//Crametk,Maldague X.Proc SPIE Thermosense XXV.Florida:SPIE,2003:450-459 [6] 奥本海姆 A V,谢弗 R W.离散时间信号处理[M].西安:西安交通大学出版社,2001 Oppenheim A V,Schafer R W.Discrete-time signal processing[M].Xi-an:Xi-an JiaoTong University Press,2001(in Chinese) [7] Wu D,Salerno A,Schonbach B,et al.Phabe sensitive modulation thermography and its applications for NDE[C]//Wurzbach R,Burleigh D.Proc SPIE Thermosense XIX.Bellingham:SPIE,1997:176-182 [8] 陈祝明,丁义元,向敬成.采用Chirp-Z变换提高LFMCW雷达的测距精度[J].信号处理,2002,18(2):110-112 Chen Zhuming,Ding Yiyuan,Xiang Jingcheng.Improving range precision of LFMCW radar by chirp-Z transform [J].Signal Processing,2002,18(2):110-112 (in Chinese) [9] 郭惠勇,李正良.基于模态应变能与频率信息修正的结构多损伤识别研究[J].应用基础与工程科学学报,2008,16(5):719-725 Guo Huiyong,Li Zhengliang.An improved information method based on modal strain energy and frequency for structural multiple damage identification [J].Journal of Basic Science and Engineering,2008,16(5):719-725(in Chinese) [10] Babiner L,Schafer R,Rader C.The chirp Z-transform algorithm [J].Audio and Electmacoustics,IEEE Tmnsactions on,1969,17(2):86-92

施引文献

资源附件(0)

访问统计