涡轮叶片微小通道气膜新型复合冷却结构设计

孙纪宁; 邓晶; 邓宏武

涡轮叶片微小通道气膜新型复合冷却结构设计

北京航空航天大学航空发动机气动热力重点实验室, 北京 100191

详细信息

中图分类号: V 231.1
计量
- 文章访问数: 3256
- HTML全文浏览量: 116
- PDF下载量: 459
- 被引次数: 0
出版历程
- 收稿日期: 2011-11-28
- 网络出版日期: 2012-05-30

Structure design of a new cooling system combined micro channel and film cooling in the turbine blade

National Key Laboratory on Aero-Engines, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 利用数值模拟的方法,研究了一种应用于涡轮导向器叶片的微小通道气膜新型复合冷却结构.重点是对微小通道和气膜孔的新型复合冷却方法进行结构设计并进行结构优化,探讨不同的冷却结构形式对流动和换热的影响.研究表明:不同的复合冷却结构对冷却效率和压力损失的影响不同;在所设计的几种复合结构中,分枝小通道结构在平衡冷却效率和压力损失方面有着较好的效果;所计算的几种复合结构的结果都显示,微小通道气膜新型复合冷却结构的冷却效率高于铸冷叶片的冷却效率,冷却效果好,具有巨大的应用前景.
- 微小通道 /
- 气膜冷却 /
- 冷却效率 /
- 压力损失
Abstract: Numerical simulation was used to investigate a new compound cooling system, which combines micro channel and film cooling together in a guide turbine vane. Research was focused on the optimization design of these new organizational structures, in order to discuss the different effect on the characteristics of flow resistance and heat transfer. In these designed structures, branching channel structure in balancing cooling efficiency and the pressure loss has good effects. The computational results also show that the cooling efficiency of this compound cooling structure is higher than the cast-cooling blade. The prospect of the compound structure applied to turbine cooling system is huge.
- micro channel /
- film cooling /
- cooling efficiency /
- pressure loss

HTML全文

参考文献(9)

[1]	韩介勤,桑地普.杜达.燃气轮机传热和冷却技术[M].西安:西安交通大学出版社,2005:1-16 Han Jieqin,Dutta S.Gas turbine heat transfer and cooling technology[M].Xi-an:Xi-an Jiaotong University Press,2005:1-16(in Chinese)
[2]	Li Zhixin,Du Dongxing,Guo Zengyuan.Experimental study on flow characteristics of liquid in circular microtubes[J].Microscale Thermophysical Engineering,2003,7(3):253-265
[3]	Jiang Peixue,Fan Minghong,Si Guangshu,et al.Thermal-hydraulic performance of small scale micro-channel and porous-media heat-exchangers[J].International Journal of Heat and Mass Transfer,2001,44:1039-1051
[4]	Bucci A,Celata G P,Cumo M,et al.Water single-phase fluid flow and heat transfer in capillary tubes //Proceedings of the Int Conference on Minichannels and Microchannels.Rochester,New York: ,2003:1031-1037
[5]	闻洁,赵桂林.流向微槽对涡轮叶片冷却通道内流动及换热特性的影响分析[J].汽轮机技术,1998,40(5):284-285 Wen Jie,Zhao Guilin.The analysis on the flow and heat transfer characteristics of the micro channel in the turbine blade cooling channels[J].Turbine Technology,1998,40(5):284-285(in Chinese)
[6]	刘庆东.涡轮叶片新内冷结构的实验研究 .北京:北京航空航天大学能源与动力工程学院,2006 Liu Qingdong.Experimental research of turbine blades’new internal cooling structure .Beijing:School of Jet Propulsion,Beijing University of Aeronautics and Astronautics,2006(in Chinese)
[7]	马世岩.涡轮叶片微小通道冷却结构的换热研究 .北京:北京航空航天大学能源与动力工程学院,2009 Ma Shiyan.Research on heat transfer of micro channel in the turbine blade cooling structure .Beijing:School of Jet Propulsion,Beijing University of Aeronautics and Astronautics,2009(in Chinese)
[8]	丁水汀,崔亮,孙纪宁,等.内部冲击和外部气膜的组合特性研究[J].航空动力学报,2007,22(2):187-192 Ding Shuiting,Cui Liang,Sun Jining,et al.Combined features of the inner impingement and outer film cooling holes of a vane[J].Journal of Aerospace Power,2007,22(2):187-192(in Chinese)
[9]	过增元.国际传热前沿——微细尺度传热[J].力学进展,2000,30(1):1-5 Guo Zengyuan.International heat transfer research frontiers—micro-scale heat transfer[J].Advances in Mechnics,2000,30(1):1-5(in Chinese)