叶冠涂层材料接触刚度和微动磨损实验

洪杰; 杨鑫; 陈璐璐; 张大义

叶冠涂层材料接触刚度和微动磨损实验

北京航空航天大学能源与动力工程学院, 北京 100191

详细信息

中图分类号: TH 117.1
计量
- 文章访问数: 1998
- HTML全文浏览量: 165
- PDF下载量: 609
- 被引次数: 0
出版历程
- 收稿日期: 2011-06-24
- 网络出版日期: 2012-10-30

Experiments of contact stiffness and fretting wear on coating material of blade shroud

School of Jet Propulsion, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 采用能够测量由接触表面微动所导致迟滞现象的实验装置,对带有涂层材料的不同接触方式的实验件进行了接触刚度和微动磨损测试.通过接触刚度测试,研究了激振力幅值、激振频率和接触正压力对接触刚度的影响;通过微动磨损分析,研究接触方式和载荷条件接触表面形态的改变,以及工作时间对接触刚度的影响.通过分析和总结实验结果,阐述了干摩擦阻尼结构微动磨损的防护措施,为提高航空发动机结构部件的可靠性提供一定的理论依据和技术支持.
- 叶冠 /
- 涂层材料 /
- 接触刚度 /
- 磨损微动 /
- 防护措施
Abstract: The experimental facilities, which could be used to measure the hysteresis curve caused by fretting during contact surface, were adopted in order to test the contact stiffness and fretting wear of the test pieces with the coating material under different contact styles. The contact stiffness test results indicate the impact of vibration force amplitude and frequency as well as contact pressure on the contact stiffness; the fretting wear test results manifest the influence on the contact stiffness when contact styles and loading conditions on the contact surface vary under different working hours. After analyzing the test results, the protective measures against fretting wear of dry friction damping structures were proposed, contributing to enhance the aero-engine reliability and offer the theoretical basis and technical support.
- blade tip shroud /
- coating material /
- contact stiffness /
- fretting wear /
- protective measures

HTML全文

参考文献(12)

[1]	Hurrick P L.The mechanism of fretting-a review[J].Wear,1970,15(6): 389-409
[2]	Waterhouse R B.Fretting corrosion [M].New York: Pergamon Press,1972
[3]	Waterhouse R B.Fretting fatigue[M].London: Elsevier Applied Science,1981
[4]	周仲荣,Vincent L.微动磨损[M].北京:科学出版社,2002 Zhou Zhongrong,Vincent L.Fretting wear[M].Beijing: Science Press,2002(in Chinese)
[5]	周仲荣,朱旻昊.复合微动磨损[M].上海:上海交通大学出版社,2004 Zhou Zhongrong,Zhu Minhao.Composite fretting wear[M].Shanghai:Shanghai Jiaotong University Press,2004(in Chinese)
[6]	Waterhouse R B,McColl I R,Harris S J.Fretting wear of a high-strength heavily work-hardened eutectoid steel[J].Wear,1994,175(1-2): 51-57
[7]	McColl I R,Waterhouse R B,Harris S J.Lubricated fretting wear of a high-strength eutectoid steel rope wire[J].Wear,1995,185(1/2): 203-212
[8]	Zhou Z R,Goudreau S,Fiset M,et al.Single wire fretting fatigue tests for electrical conductor bending fatigue evaluation[J].Wear,1995,181/183: 537-543
[9]	Zhang X Y,Ren P D,Li C X,et al.Fretting wear behavior of alloy-800 tube materials[J].Nuclear Power Engineering,2009,30(5):69-74
[10]	Cai Z B,Zhu M H,Zhang Q, et al.Oxidation behaviors of steel-to-steel contact under torsional fretting wear[J].Journal of Xi-an Jiaotong University,2009,43(9):86-90
[11]	陈璐璐,马艳红,李迪,等.微动工况下接触刚度测试[J].航空动力学报,2010,25(4):963-942 Chen Lulu,Ma Yanhong,Li Di,et al.Measurement of contact stiffness during microslip[J].Journal of Aerospace Power,2010,25(4):963-942(in Chinese)
[12]	史亚杰.叶片非线性振动响应分析及干摩擦减振设计研究 .北京: 北京航空航天大学能源与动力工程学院,2006 Shi Yajie.Analysis of nonlinear response and design of vibration damping of shrouded blades system .Beijing: School of Jet Propulsion,Beijing University of Aeronautics and Astronautics,2006(in Chinese)