蜂窝结构异面变形动态塑性坍塌力学

樊彦斌; 王之栎

蜂窝结构异面变形动态塑性坍塌力学

北京航空航天大学机械工程及自动化学院, 北京 100191

详细信息

中图分类号: V414.6
计量
- 文章访问数: 1694
- HTML全文浏览量: 86
- PDF下载量: 614
- 被引次数: 0
出版历程
- 收稿日期: 2011-06-25
- 网络出版日期: 2012-11-30

Dynamic plastic collapse mechanical model of honeycomb structures out-plane deformation

School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 在蜂窝结构静态塑性坍塌应力理论计算模型的基础上,建立了蜂窝结构在冲击载荷作用下的动态塑性坍塌应力的理论计算模型.考虑应变率对蜂窝结构动态力学性能的影响,使用Cowper-Symonds模型建立了静态塑性坍塌应力与动态塑性坍塌应力之间的关系;基于薄板弯曲理论,由平均冲击速度得到了应变率的计算公式,进而得出动态塑性坍塌应力关于冲击速度与静态塑性坍塌应力的函数关系.使用LS-DYNA动力学软件模拟了铝合金蜂窝结构在冲击载荷作用下的异面变形,数值计算结果与理论模型计算结果一致.
- 蜂窝结构 /
- 异面变形 /
- 冲击载荷 /
- 塑性坍塌应力
Abstract: Based on the static plastic collapse stress (SPCS) theoretical model, a dynamic plastic collapse stress (DPCS) theoretical model of honeycomb structures under impact loading was built. In view of the effect that the strain rate had on the dynamic mechanical performance of honeycomb material, the relationship between SPCS and DPCS was established by using Cowper-Symonds model. A sheet bending theory based strain rate formula via the average impact speed was developed. Furthermore, a function about the relationship between DPCS and impact speed was proposed. At last, an out-plane deformation simulation of the aluminum honeycomb structures under impact loading was performed on LS-DYNA dynamics software. The numerical calculation results coincide with the theoretical model calculation ones.
- honeycomb structures /
- out-plane deformation /
- impact loading /
- plastic collapse stress

HTML全文

参考文献(11)

[1]	Mc Farland R K Jr.Hexagonal cell structures under post-buckling ax-ial load[J].AIAA Journal,1963,1(6):1380-1385
[2]	Wierzbicki T.Crushing analysis of metal honeycombs[J].International Journal of Impact Engineering,1983,1(2):157-174
[3]	张大军,余同希.蜂窝材料面外受压时初始弹性失稳载荷的计算[J].上海交通大学学报,1990,24(5/6):47-55 Zhang Dajun,Yu Tongxi.The initial elastic instability load calculation of honeycombs under out-plane compressive load[J].Journal of Shanghai Jiaotong University,1990,24(5/6):47-55(in Chinese)
[4]	祝涛,王德禹.蜂窝芯层非线性等效弹性参数[J].上海航天,2008,4:15-18 Zhu Tao,Wang Deyu.Nonlinear equivalent elastic parameters of honeycomb core[J].Aerospace Shanghai,2008,4:15-18(in Chinese)
[5]	刘强,黄争鸣.金属蜂窝材料的弹塑性屈曲临界应力值[J].力学季刊,2008,29(4):515-520 Liu Qiang,Huang Zhengming.Elasto-plastic buckling critical stress of metal honeycomb[J].Chinese Quarterly of Mechanics,2008,29(4):515-520(in Chinese)
[6]	Yamashita M,Gotoh M.Impact behavior of honeycomb structures with various cell specifications-numerical simulation and experiment[J].International Journal of Impact Engineering,2005,32(1):618-630
[7]	王闯,刘荣强,邓宗全,等.铝蜂窝结构的冲击动力学性能的试验及数值研究[J].振动与冲击,2008,27(11):56-61 Wang Chuang,Liu Rongqiang,Deng Zongquan,et al.Impact performance of aluminum honeycomb structures-experiment and numerical study[J].Journal of Vibration and Shock,2008,27(11):56-61(in Chinese)
[8]	刘荣强,罗昌杰,王闯,等.腿式着陆器缓冲材料缓冲特性及其表征方法研究[J].宇航学报,2009,30(2):786-794 Liu Rongqiang,Luo Changjie,Wang Chuang,et al.The study of cushioning properties and characterization method for cushioning material on legged lander[J].Journal of Astronautics,2009,30(2):786-794(in Chinese)
[9]	杨桂通.弹塑性力学引论[M].北京:清华大学出版社,2004:218-247 Yang Guitong.Introduction to elasticity and plasticity[M].Beijing:Tsinghua University Press,2004:218-247(in Chinese)
[10]	尚晓江,苏建宇.ANSYS/LS-DYNA动力分析方法与工程实例[M].北京:中国水利水电出版社,2005:50-70 Shang Xiaojiang,Su Jianyu.ANSYS/LS-DYNA dynamic analysis methods and engineering practice[J].Beijing:China Water Power Press,2005:50-70(in Chinese)
[11]	王永宁,李大永.铝蜂窝异面变形的数值模拟[J].中国机械工程,2006,10(增刊):340-343 Wang Yongning,Li Dayong.Numerical simulations of aluminum honeycomb out-plane deformation[J].China Mechanical Engineering,2006,10(Supplement):340-343(in Chinese)