基于干扰观测器的惯性动量轮高精度控制

张聪; 刘刚; 李光军

基于干扰观测器的惯性动量轮高精度控制

北京航空航天大学仪器科学与光电工程学院, 北京 100191

基金项目: 国家杰出青年科学基金资助项目(60825305); 国家自然科学基金资助项目(61174003)

详细信息

中图分类号: V 488.22
计量
- 文章访问数: 2013
- HTML全文浏览量: 63
- PDF下载量: 713
- 被引次数: 0
出版历程
- 收稿日期: 2011-11-07
- 网络出版日期: 2013-01-31

High-precision control for inertia momentum wheel based disturbance observer

School of Instrument Science and Opto-electronics Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 为了提高惯性动量轮的输出力矩精度,针对惯性动量轮存在的内干扰力矩,提出一种基于干扰观测器的扰动抑制策略.通过建立惯性动量轮动力学模型,分析得出目前的惯性动量轮力矩控制不能无差地跟随阶跃力矩指令,进而设计了干扰观测器,并根据估计出的扰动力矩计算得到补偿控制电压.设计控制系统并采用该方法,在惯性动量轮工程样机上进行实验研究.结果表明:采用基于干扰观测器的扰动抑制策略,使惯性动量轮输出力矩精度从0.01 N·m提高到0.002 N·m,转速和力矩响应曲线更平滑.
- 扰动抑制 /
- 力矩控制 /
- 补偿
Abstract: To improve the output torque accuracy, a novel disturbance rejection strategy was presented with disturbance observer, based on the internal disturbance torque of inertia momentum wheel. By establishing the dynamic model of inertia momentum wheel, the existing torque control system was analyzed. The analysis results indicated that the torque control couldn't track the torque instruction without deflection, essentially. The proposed disturbance observer was designed. According to the estimated disturbance torque, the compensation control voltage was calculated. Ultimately, the control system was designed to carry out experimentations on the prototype of inertia momentum wheel. Experimental results demonstrate that the output torque accuracy can be improved from 0.01 N穖 to 0.002 N穖 by the disturbance rejection strategy. And the rotational speed and torque response curves are more smooth.
- disturbance rejection /
- torque control /
- compensation

HTML全文

参考文献(16)

[1]	郝敬然,王舒雁.基于开关式Hall传感器的飞轮低速控制[J].航天控制,2006,24(1):29-32 Hao Jingran,Wang Shuyan.Low speed control for flywheel based on switch-mode hall[J].Aerospace Control,2006,24(1):29-32(in Chinese)
[2]	杜坤梅,李铁才.惯性飞轮电机力矩伺服控制系统[J].电机与控制学报,2001,5(2):119-120 Du Kunmei,Li Tiecai.Controlling system of inertial flywheel through torque servo motor[J].Electric Machines and Control,2001,5(2):119-120(in Chinese)
[3]	尹秋岩,赵健康,戴金海.反作用飞轮内干扰抑制方法研究[J].电子与信息学报,2007,29(6):1521-1524 Yin Qiuyan,Zhao Jiankang,Dai Jinhai.A method of control inner disturb to the reaction wheel[J].Journal of Electronics and Information Technology,2007,29(6):1521-1524(in Chinese)
[4]	周新秀,房建成,刘刚.磁悬浮反作用飞轮电机滑模变结构控制[J].电机与控制学报,2008,12(5):487-492 Zhou Xinxiu,Fang Jiancheng,Liu Gang.Variable structure control strategy research on the magnetically suspended reaction flywheel[J].Electric Machines and Control,2008,12(5):487-492(in Chinese)
[5]	程灏,葛升民,刘付成,等.反作用飞轮力矩模式控制系统设计[J].宇航学报,2006,27(6):1248-1253 Cheng Hao,Ge Shengmin,Liu Fucheng,et al.The design of torque mode control for reaction wheel system[J].Journal of Astronautics,2006,27(6):1248-1253(in Chinese)
[6]	李连军,戴金海.反作用飞轮低速特性观测补偿方法[J].国防科技大学学报,2005,27(1):39-43 Li Lianjun,Dai Jinhai.The compensation method of the observation of the reaction wheel at low speed[J].Journal of National University of Defence Technology,2005,27(1):39-43(in Chinese)
[7]	Du C,Li H,Thum C K,et al.Simple disturbance observer for disturbance compensation[J].IET,Control Theory & Applications,2010,4(9):1748-1755
[8]	Yoon Y D,Jung E,Sul S K.Application of a disturbance observer for a relative position controlsystem[J].IEEE Transactions on Industry Applications,2010,46(2):849-856
[9]	Qing W J.Disturbance rejection through disturbance observer with adaptive frequency estimation[J].IEEE Transactions on Magnetics,2009,45(6):2675-2678
[10]	Kempf C J,Kobayashi S.Disturbance observer and feedforward design for a high-speed direct-drive positioning table[J].IEEE Transactions on Control Systems Technology,1999,7(5): 513- 526
[11]	Kim B K,Chung W K.Adcanced disturbance observer design for mechanical positioning systems[J].IEEE Transactions on Industrial Electronics,1999,50(6):1207-1216
[12]	Iwasaki M,Shibata T,Matsui N.Disturbance-observer-based nonlinear friction compensation in table drive system[J].IEEE/ASME Transactions on Mechatronics,1999,4(1):3-8
[13]	Yang Z J,Hara S,Kanae S,et al.An adaptive robust nonlinear motion controller combined with disturbance observer[J].IEEE Transactions on Control Systems Technology,2010,18(2): 454- 462
[14]	Mohammadi A,Tavakoli M,Marquez H J.Disturbance observer-based control of non-linear haptic teleoperation systems[J].IET,Control Theory & Applications,2011,5(18):2063-2074
[15]	Yi J G,Chang S,Shen Y T.Disturbance-observer-based hysteresis compensation for piezoelectric actuators[J].IEEE/ASME Transactions on Mechatronics,2009,14(4):456-464
[16]	Jamaludin Z,Brussel H V,Swevers J.Friction compensation of an XY feed table using friction-model-based feedforward and an inverse-model-based disturbance observer[J].IEEE Transactions on Industrial Electronics,2009,56(10):3848-3853