平面编织混杂铺层层板穿透挖补修理参数分析

刘遂; 关志东; 郭霞; 席国芬

平面编织混杂铺层层板穿透挖补修理参数分析

1.
北京航空航天大学航空科学与工程学院, 北京 100191
2. 中国商飞上海飞机设计研究院, 上海 200232

详细信息

中图分类号: V257;TB330.1
计量
- 文章访问数: 1523
- HTML全文浏览量: 69
- PDF下载量: 703
- 被引次数: 0
出版历程
- 收稿日期: 2011-12-12
- 网络出版日期: 2013-02-28

Parametric analysis on hybrid plain woven fabric laminates repaired by full depth scarfing

1.
School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China
2. Shanghai Aircraft Design and Research Institute, Commercial Aircraft Lorporation of China Ltd, Shanghai 200232, China

摘要

摘要: 基于ABAQUS软件平台建立穿透挖补修理后混杂铺层层板有限元模型,对修理后层板的拉伸强度和破坏模式进行预测.为验证模型的有效性,对无损伤板和修理后层板进行了试验研究,模型计算结果和试验吻合良好.使用计算模型对修理后结构进行参数研究,比较不同挖补斜度、胶层韧性、胶层厚度、损伤尺寸及附加修理层等设计参数对修理后结构拉伸强度的影响,得到的结果可以为含穿透损伤混杂铺层层板修理设计提供理论指导.
- 挖补修理 /
- 平面编织 /
- 混杂铺层 /
- 拉伸强度 /
- 参数分析
Abstract: Based on the software of ABAQUS,a finite element model was developed in the study of simulating the ultimate tensile strength and failure mode of repaired specimens. To certify the validation of the model, an experimental study was carried out on intact and repaired laminates. The calculated results are coordinate with the tested results very well. Parametric study was conducted on the model to investigate the influence of ultimate tensile strength on changes of scarf ratio, toughness of adhesive, thickness of adhesive, dimension of damage and extra repair plies. The results of the investigation provide insight into the repair design method on hybrid plain woven fabric laminates with penetrate damage.
- scarfing repair /
- plain woven /
- hybrid laminate /
- tensile strength /
- parametric analysis

HTML全文

参考文献(13)

[1]	Armstrong K B,Bevan L G,Cole Ⅱ W F.Care and repair of advanced composites[M].2nd ed.PA USA:SAE International,2005:263-265
[2]	Jones J S,Graves S R.Repair techniques for Celion-LARC-160 graphite-polyimide composite structures[R].NASA CR-3794,1984
[3]	孟凡颢,陈绍杰,童小燕.层压板修理设计中的参数选择问题[J].复合材料学报,2001,18(4):28-31 Meng Fanhao,Chen Shaojie,Tong Xiaoyan.Selection of the design parameters in laminate repair[J].Acta Materiae Compositae Sinica,2001,18(4):28-31(in Chinese)
[4]	Kumar S B,Sridhar I,Sivashanker S I,et al.Tensile failure of adhesively bonded CFRP composites scarf joints[J].Materials Science and Engineering B,2006,132:113-120
[5]	Kumar S B,Sivashanker S I,Osiyemi S O,et al.Failure of aerospace composite scarf-joints subjected to uniaxial compression [J].Materials Science and Engineering A,2005,412:117-122
[6]	Pipes R B,Adkins D W,Deaton J.Strength and repair of bonded scarf joints for repair of composite materials[R].NASA Langley Research Center,MSG 1304,1982
[7]	Odi R A,Friend C M.An improved 2D model for bonded composite joints[J].International Journal of Adhesion & Adhesives,2004,24:389-405
[8]	Campilho R D,de Moura M S,Domingues J J.Stress and failure analyses of scarf repaired CFRP laminates using a cohesive damage mode[J].Journal of Adhesion Science and Technology,2007,21(8):55-70
[9]	Wang C H,Gunnion A J.On the design methodology of scarf repair to composite laminates[J].Composite Science and Technology,2008,68:35-46
[10]	Boeing Ltd.Boeing 737-800 structural repair manual[M].Chicago:Boeing Ltd,2003
[11]	Airbus Ltd.Airbus A320 structural repair manual[M].Toulouse:Airbus Ltd,2007
[12]	邹健,程小全,邵世刚,等.基于ANSYS环境的平面编织层合板拉伸破坏数值仿真[J].复合材料学报,2007,24(6):180-184 Zou jian,Cheng Xiaoquan,Shao Shigang,et al.Numerical simulation for plain woven composite laminate based on ANSYS software[J].Acta Materiae Compositae Sinica,2007,24(6):180-184(in Chinese)
[13]	程小全,邹健,许延敏,等.含孔平面编织混杂铺层层合板压缩破坏仿真[J].力学学报,2007,39(6):829-834 Cheng Xiaoquan,Zou Jian,Xu Yanmin,et al.Simulation of compressive failure of hybrid plain woven fabric laminate with a hole[J].Chinese Journal of Theoretical Applied Mechanics,2007,39(6):829-834(in Chinese)