Ultrasonic phased array inspection for the corner of composite components
-
摘要: 针对复合材料构件R区的超声检测问题,开展超声相控阵检测实验研究.分析R区的检测难点,利用超声相控阵检测技术的优势,分别提出了基于相控阵弧阵换能器和线阵换能器的两种检测方法;对复合材料L型试样的R区进行超声相控阵检测实验,验证了两种检测方法的正确性;并与常规超声检测方法进行对比,分析了超声相控阵技术检测R区的技术优势.研究结果表明:超声相控阵检测技术具有适用性强、检测效率高等优势,可以满足复合材料构件R区的检测要求.Abstract: Ultrasonic phased array inspection for the corner of composite components was researched on experiment. The difficulties of the corner inspection and advantages of ultrasonic phased array inspection technique were dealt with. Then two kinds of inspection methods with curved array transducer and linear array transducer were put forward. The experiments of the corner inspection of L-shaped composite component were conducted with the two methods, which verified the correctness of the two kinds of methods. Finally, the two inspection methods and conventional ultrasonic inspection method were contrasted and the advantages of the corner inspection using ultrasonic phased array technique were summarized. The results show that ultrasonic phased array technique is a feasible, efficient detection method, which can satisfy the inspection requirement of the corner of composite components.
-
Key words:
- ultrasonic phased array /
- nondestructive testing /
- composite /
- corner
-
[1] 苏云洪,刘秀娟,杨永志.复合材料在航空航天中的应用[J].工程与试验,2008(4):36-38
Su Yunhong,Liu Xiujuan,Yang Yongzhi.Application of composites in aviation and aerospace[J].Testing Technology and Testing Machine,2008(4):36-38(in Chinese)[2] 李家伟,陈积懋.无损检测手册[M].北京:机械工业出版社,2002:954-955
Li Jiawei,Chen Jimao.Nondestructive testing manual[M].Beijing:China Machine Press,2002:954-955(in Chinese)[3] Busse G. Nondestructive evaluation of polymer materials[J].NDT & E International,1994,27(5):253-262 [4] Reynolds W N.Nondestructive testing (NDT) of fibre-reinforced composite materials[J].Material & Design,1984,5(6):256-270 [5] 叶宏军,翟全胜,彭志霞,等.复合材料帽形结构水溶芯模共固化成型工艺研究[J].纤维复合材料,2009(4):3-5
Ye Hongjun,Zhai Quansheng,Peng Zhixia,et al.Co-curing technology using water dispersible core for the hollw'structure composite parts[J].Fiber Composite,2009(4):3-5(in Chinese)[6] Nesvijski E G.Some aspects of ultrasonic testing of composites[J].Composite Structures,2000,48:151-155 [7] Satyanarayan L,Sridhar C,Krishnamurthy C V,et al.Simulation of ultrasonic phased array technique for imaging and sizing of defects using longitudinal waves[J].International Journal of Pressure Vessels and Piping,2007,84:716-729 [8] Wooh Shichang, Shi Yijun.Optimum beam steering of linear phased arrays[J].Wave Motion,1999,29:245-265 [9] 林莉,杨平华,张东辉,等.厚壁铸造奥氏体不锈钢管道焊缝超声相控阵检测技术概述[J].机械工程学报,2003,39(2):1-9
Lin Li,Yang Pinghua,Zhang Donghui,et al.Review of phased array ultrasonic testing for thick wall cast austenitic stainless steel pipeline welds[J].Journal of Mechanical Engineering,2003,39(2):1-9(in Chinese)[10] Lamarre A,Dube N,Ciorau P,et al.Feasibility study of ultrasonic inspection of turbine blade root using phased array probes[J].Insight,2000,42(9):586-589 [11] Habermehl J,Lamarre A.Ultrasonic phased array tools for composite inspection during maintenance and manufacturing[C] //17th World Conference on Nondestructive Testing.Shanghai:[s.n.],2008:25-28 [12] 何方成,王铮,史丽军.复合材料制件拐角部位超声检测技术[J].材料工程,2011(7):80-84
He Fangcheng,Wang Zheng,Shi Lijun.Ultrasonic testing technique for the inspection of defects in the corner of composites[J].Journal of Materials Engineering,2011(7):80-84(in Chinese)[13] Drinkwater B W,Wilcox P D.Ultrasonic arrays for non-destructive evaluation:a review[J].NDT & E International,2006,39:525-541 [14] Holmes C,Drinkwater B W,Wilcox P D.Post-processing of the full matrix of ultrasonic transmit-receive array data for non-destructive evaluation[J].NDT & E International,2005,38:701-711
点击查看大图
计量
- 文章访问数: 1684
- HTML全文浏览量: 159
- PDF下载量: 778
- 被引次数: 0