Prediction of thermal expansion properties for composites by micromechanical analysis model
-
摘要: 基于细观力学有限元方法对T300/5208,P75/934,P75/CE339,C6000/PMR 15,HMS/Borosilicate,P100/2024 Al六种复合材料的纵向和横向热膨胀系数进行了预报,并将预报结果与国内外常用的几种理论方法的预报结果以及试验值进行了对比,分析了各分析方法的预报精度.各分析方法对于复合材料的纵向热膨胀系数的预报结果与试验值均能很好吻合;对于横向热膨胀系数,各分析方法的预报结果相差较大.Rosen and Hashin(RH)方法与所建立的细观力学有限元分析模型的预报结果与试验值的吻合程度比其他理论方法要高,进而验证了细观力学有限元方法的可靠性.此外,基于细观力学有限元方法建立了各种材料体系热膨胀系数对纤维体积分数的响应关系,得出复合材料纤维/基体性能比对其热膨胀系数的影响,为航空航天结构先进复合材料的应用提供了技术基础支撑.Abstract: A micromechanics finite element method was used to predict the longitudinal and transverse coefficients of thermal expansion of the following six kinds of composites, T300/5208, P75/934, P75/CE339, C6000/PMR 15, HMS/Borosilicate, P100/2024 Al. The predictions and some other common analytical methods were compared with each other. With experimental data, the predicting accuracy of all these analysis methods was investigated. In all of these methods, the predictions for the longitudinal coefficients of thermal expansion of composites have good agreement with experimental values. However, large discrepancies exist for the transverse coefficients of thermal expansion. The predictions of the Rosen and Hashin(RH) method and micromechanical finite element analysis model are better fit for the experimental values than other analytical methods, and then verify the reliability of the micromechanics finite element method. In addition, the response of the coefficients of thermal expansion for the fiber volume fraction of the six kinds of composites was established by using micromechanics finite element method, the influence of the property ratios of fiber and matrix on the coefficients of thermal expansion was obtained. The results provide the technical foundation for the application of advanced composite materials in aerospace structures.
-
Key words:
- composites /
- micromechanics /
- coefficients of thermal expansion /
- finite element analysis
-
[1] Schapery R A.Thermal expansion coefficients of composite materials based on energy principles[J].Composite Materials,1968,2(3):380-404 [2] Rogers K F,Phillips L N,Kingston-Lee D M,et al.The thermal expansion of carbon fiber reinforced plastics part 1:the influence of fiber type and orientation[J].Journal of Material Science,1977(12):718-734 [3] Chamis C C.Simplified composite micromechanics equation for hygral,thermal and mechanical properties[J].SAMPE Quarterly,1984,15(3):14-23 [4] 黄争鸣.复合材料细观力学引论[M].北京:科学出版社,2004:69-73 Huang Zhengming.Introduction of micromechanics of composite materials[M].Beijing:Science Press,2004:69-73(in Chinese) [5] Rosen B W,Hashin Z.Effective thermal expansion coefficients and specific heats of composite materials[J].Engineering Science,1970,8(2):157-173 [6] Sideridis E,Kytopoulos V N,Kyriazi E,et al.Determination of thermal expansion coefficient of particulate composites by the use of a triphase model[J].Composites Science and Technology,2005,65(6):909-919 [7] Tognana S,Salgueiro W,Somoza A,et al.Influence of the filler content on the thermal expansion behavior of an epoxy matrix particulate composite[J].Materials Science and Engineering:Part B,2009,157(1/2/3):26-31 [8] 刘兵山,燕瑛,田金梅.纤维增强对称层合复合材料的宏观热膨胀系数研究[J].强度与环境,2008,35(5):17-24 Liu Bingshan,Yan Ying,Tian Jinmei.Study on the macro thermal expansion coefficients of fiber-reinforced symmetric laminates[J].Structure & Environment Engineering,2008,35(5):17-24(in Chinese) [9] 成玲.碳/环氧编织复合材料热膨胀特性分析[J].固体火箭技术,2010,33(1):108-111 Cheng Ling.Thermal expansion coefficients of carbon/epoxy braided composites[J].Journal of Solid Rocket Technology,2010,33(1):108-111(in Chinese) [10] Karadeniz Z H,Kumlutas D.A numerical study on the coefficients of thermal expansion of fiber reinforced composite materials[J].Composite Structures,2007,78(1):1-10 [11] Dong Chensong.Development of an engineering model for predicting the transverse coefficients of thermal expansion of unidirectional fiber reinforced composites[J].Engineering Materials and Technology,2009,131(3):1-7 [12] Bowles D E,Tompkins S S.Prediction of coefficients of thermal expansion for unidirectional composites[J].Composite Material,1989,23(4):370-388
点击查看大图
计量
- 文章访问数: 1758
- HTML全文浏览量: 214
- PDF下载量: 650
- 被引次数: 0