留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

基于振动时效的异质构件残余应力均匀化方法

肖长玲 陈云霞 许丹

肖长玲, 陈云霞, 许丹等 . 基于振动时效的异质构件残余应力均匀化方法[J]. 北京航空航天大学学报, 2013, 39(8): 1133-1136.
引用本文: 肖长玲, 陈云霞, 许丹等 . 基于振动时效的异质构件残余应力均匀化方法[J]. 北京航空航天大学学报, 2013, 39(8): 1133-1136.
Xiao Changling, Chen Yunxia, Xu Danet al. Title homogenizing residual stress of heterogeneous component based on vibration stress relief[J]. Journal of Beijing University of Aeronautics and Astronautics, 2013, 39(8): 1133-1136. (in Chinese)
Citation: Xiao Changling, Chen Yunxia, Xu Danet al. Title homogenizing residual stress of heterogeneous component based on vibration stress relief[J]. Journal of Beijing University of Aeronautics and Astronautics, 2013, 39(8): 1133-1136. (in Chinese)

基于振动时效的异质构件残余应力均匀化方法

详细信息
  • 中图分类号: V240.2

Title homogenizing residual stress of heterogeneous component based on vibration stress relief

  • 摘要: 针对异质构件在装配过程中不可避免地产生非均匀化残余应力,且残余应力随着时间变化而不断减小,从而产生应力松弛的非均匀化,将影响构件的长期稳定性这一现象,同时针对该异质构件不适合用热时效方法处理的问题,利用有限元仿真方法首先仿真异质构件残余应力的分布,然后研究异质构件残余应力在自然时效下的变化规律,最后通过模态分析得到激振频率、谐响应分析得到激振幅值,通过瞬态动力仿真分析研究异质构件残余应力在振动时效下的变化规律.仿真结果表明:在自然时效下,残余应力需要经过1 a左右的时间才能基本达到稳定.在振动时效下,初始的几个周期就可以使得残余应力达到稳定.因此,通过结果对比分析认为,基于塑性变形理论的振动时效是一种快速使得残余应力均匀化的有效方法.

     

  • [1] 刘洁瑜,余志勇,汪立新,等.导弹惯性制导技术[M] .西安:西北工业大学出版社,2010:1-3 Liu Jieyu,Yu Zhiyong,Wang Lixin,et al.Missile inertial guidance technology[M].Xi-an:Northwestern Polytechnical University Press,2010:1-3(in Chinese) [2] Yang Y S,Lee S H.A study on the joining strength of laser spot welding for automotive applications[J].Journal of Materials Processing Technology,1999,94(2):151-156 [3] Nishimura T,Aoki S,Hiroi T,et al.Reduction method for residual stress of welded joint using random vibration[J].Nuclear Engineering and Design,2005,6(235):1441-1445 [4] 蒋刚,何闻.高频振动时效消除焊接残余应力的仿真及实验研究[D].杭州:浙江大学,2007 Jiang Gang,He Wen.Simulation and experimental research on welding residual stress relieving by high frequency vibratory stress relief technology[D].Hangzhou:Zhejiang University,2007(in Chinese) [5] 黄晓婧,王俊彪,张贤杰.铝合金时效蠕变与时效应力松弛关系研究[J].航空制造技术,2011(11):99-101 Huang Xiaojing,Wang Junbiao,Zhang Xianjie.Research on relationship between agling creep and stress relaxation of Al-alloy[J].Aeronautical Manufacturing Techonlogy,2011(11):99-101(in Chinese) [6] 高耀东.ANSYS机械工程应用精华50例[M].北京:电子工业出版社,2011:262-263 Gao Yaodong.50 Cases of mechanical engineering application essence based on ANSYS[M].Beijing:Publishing House of Electronics Industry,2011:262-263(in Chinese) [7] David A Tanner,Jeremy S Robinson,Richard L Cudd.Cold compression residual stress reduction in aluminium alloy 7010[J].Materials Science Forum,2000,5(347):235-240 [8] JB/T5926-91振动时效工艺参数选择及技术要求[S] JB/T5926-91 The process parameters and technical requirements of vibration stress relief[S](in Chinese) [9] Lin Kuang.Finite element predictions of residual stress relief in a two-dimensional cantilever beam[D].New York:ALFRED University,2002
  • 加载中
计量
  • 文章访问数:  1585
  • HTML全文浏览量:  258
  • PDF下载量:  531
  • 被引次数: 0
出版历程
  • 收稿日期:  2012-09-06
  • 修回日期:  2013-01-23
  • 网络出版日期:  2013-08-30

目录

    /

    返回文章
    返回
    常见问答