可重复使用火箭发动机再生冷却槽失效分析

杨进慧; 陈涛; 金平; 蔡国飙

可重复使用火箭发动机再生冷却槽失效分析

北京航空航天大学宇航学院, 北京 100191

详细信息

作者简介:
杨进慧(1987-),女,河北衡水人,博士生,yangjinhui@sa.buaa.edu.cn.

中图分类号: V434⁺.1
计量
- 文章访问数: 1147
- HTML全文浏览量: 124
- PDF下载量: 662
- 被引次数: 0
出版历程
- 收稿日期: 2012-10-23
- 网络出版日期: 2013-09-30

Failure analysis of reusable rocket engine coolant passage

School of Astronautics, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 完成了可重复使用液体火箭发动机推力室再生冷却槽热力循环载荷下的蠕变非弹性热结构分析,对比研究了各向同性硬化和随动硬化定律对冷却槽结构分析的影响,并在多循环结构场基础上分析了冷却槽"狗窝"失效过程.结果表明可以通过选取热传导率差别小的内外壁材料、优化几何结构改善温度场及结构场;各向同性和随动硬化结构曲线变化趋势相似,但塑性应变有较大差别,残余应变相差约0.06%;多循环加载中每个循环的结构曲线形状相似并不断右移,硬化效应明显,低周疲劳损伤和蠕变损伤分别取决于循环载荷下的应变和应力值.
- 可重复使用 /
- 热结构分析 /
- 循环加载 /
- 蠕变 /
- 硬化
Abstract: Through the creep nonlinear thermal-structure analysis of the reusable combustion chamber coolant passage under cyclic thermal and mechanical loading, comparison between kinematic and isotropic hardening results was made to study the hardening influence. Basing on those cyclic structure results, the "dog house" failure model of coolant passage was implemented. Results indicate that the thermal and structure environment could be improved by introducing materials with similar thermal conductivity for the jacket and inner wall and optimizing the geometric model; the kinematic and isotropic hardening results were similar in illustrating the development of stress and strain under cyclic loadings, whereas at the remaining strain variance of approximate 0.06%; the strain hardening effect was obvious in those cyclic loops which was analogous each cycle and right moved, and the fatigue damage and creep damage were determined respectively by cyclic strain and stress.
- reusable /
- thermal-structure analysis /
- cyclic loadings /
- creep /
- hardening

HTML全文

参考文献(1)

[1] Riccius J,Haidn O J,Zametaev E B.Influence of time dependent effects on the estimated life time of liquid rocket combustion chamber walls[R].AIAA 2004-3670,2004 [2] Quentmeyer R J.Experimental fatigue life investigation of cylindrical thrust Chambers[R].AIAA-77-893,1977 [3] Arya V K,Arnold S M.Viscoplastic analysis of an experimental cylindrical thrust chamber line[J].AIAA Journal,1992, 30(3):781-789 [4] Arya V K.Nonlinear structural analysis of cylindrical thrust chambers using viscoplastic models[R].NASA-CR-185253,1991 [5] Schwarz W,Schwub S,Quering K,et al.Life prediction of thermally highly loaded components modeling the damage process of a rocket combustion chamber hot wall[J].CEAS Space J, 2011,1:83-97 [6] Riccius J,Haidn O J.Determination of linear and nonlinear parameters of combustion chamber wall materials[R].AIAA-2003-4901,2003 [7] Asraff A K,Sunil S,Muthukumar R,et al.Stress analysis & life prediction of a cryogenic rocket engine thrust chamber considering low cycle fatigue,creep and thermal ratcheting[J].Transactions of the Indian Institute of Metals,2010,63(2-3):601-606 [8] Asraff A K,Sunil S,Muthukumar R,et al.New concepts in structural analysis and design of double walled LPRE thrust chamber[R].AIAA-2006-4368,2006 [9] 杨进慧,陈涛,金平,等.液体火箭发动机再生冷却槽寿命预估[J].航空动力学报, 2012,27(4):907-912 Yang Jinhui,Chen Tao,Jin Ping,et al.Life prediction of cooling passage for reusable liquid rocket engine[J].Journal of Aerospace Power, 2012,27(4):907-912(in Chinese) [10] Kuhl D,Woschnak A,Haidn O J.Coupled heat transfer and stress analysis of rocket combustion chambers[R].AIAA-98-3373,1998 [11] Porowski J S.Development of a simplified procedure for thrust chamber life prediction[R].NASA CR-165585,1981

施引文献

资源附件(0)

访问统计