Dimensionless study on outlet torque characteristics of an air powered engine
-
摘要: 针对气动发动机的工作过程,利用能量方程、气体状态方程、连续性方程及运动过程方程建立气动发动机的非线性微分方程组.选取合适的基准量,对所建立的微分方程组进行无因次化,得到无因次化的数学模型.利用MATLAB/Simulink仿真工具,对无因次数学模型进行研究,得到各无因次量对气动发动机输出扭矩的影响.从仿真结果可以看出,气动发动机的无因次转速、进气门面积比例因子、排气门面积比例因子以及进气持续角度对气动发动机的无因次输出扭矩影响较大.当发动机转速升高扭矩急剧下降时,可以通过调整进气门面积比例因子、排气门面积比例因子以及进气持续角度使输出扭矩恒定.Abstract: Aiming at the process of an air powered engine, the energy equation, gas state equation, continuity equation and momentum equation were used to set up non-linear differential equations of an air powered engine(APE). By selecting the appropriate reference values, the basic mathematical model was transformed to a dimensional expression. Using MATLAB/Simulink for simulation, the dimensionless outlet torque characteristics of APE were obtained. Through analysis, it can be seen that the dimensionless outlet torque of APE was mainly determined by the dimensionless crankshaft speed, the inlet effective area scaling coefficient, the outlet effective area scaling coefficient and the duration angle. The dimensionless outlet torque could be regulated by charging the inlet effective area, the outlet effective area and the duration angle to fit the change of crankshaft speed.
-
Key words:
- air powered engine /
- mathematical model /
- the dimensionless model /
- outlet torque
-
[1] 蔡茂林.压缩空气的能量[J].液压气动与密封,2007, 27(5):54-59 Cai Maolin.Compressed air energy[J].Hydraulic Pneumatic and Sealing,2007,27(5):54-59(in Chinese) [2] 俞小莉,元广杰,沈瑜铭,等.气动发动机工作循环的理论分析[J].机械工程学报,2002,38(9):118-122 Yu Xiaoli,Yuan Guangjie,Shen Yuming,et al.Theoretical analysis of air powered engine work cycle[J].Chinese Journal of Mechanical Engineering,2002,38(9):118-122(in Chinese) [3] Liu Lin,Yu Xiaoli.Practicality study on air-powered vehicle[J].Frontiers of Energy and Power Engineering in China,2008, 2(1):14-19 [4] Luis R T.Dynamic characteristics of pneumatic cylinder systems[D].Tokyo:Department of Control Engineering,Tokyo Institute of Technology,1998 [5] 蔡茂林.气动元件的流量特性[J].液压气动与密封.2007, 27(2):44-48 Cai Maolin.The flow characteristics of pneumatic components[J].Hydraulic Pneumatic and Sealing,2007,27(2):44-48(in Chinese) [6] Wang Xiaoyong,Tsu-Chin Tsao,Tai Chun,et al.Modeling of compressed air hybrid operation for a heavy duty diesel engine[C]//ASME 2008 Internal Combustion Engine Division.Chicago:Spring,2009,131(5):052802.1-052802.8 [7] 香川.空気圧抵抗容量系の動特性における熱伝達率の考察[J],油圧と空気圧,1981,12(3):209-212 Kagawa Toshiharu.Consideration of the heat transfer coefficient in the dynamic characteristics of the system air pressure resistance capacity[J].Hydraulic and Pneumatic,1981,12(3):209-212(in Japanese) -
点击查看大图
计量
- 文章访问数: 1531
- HTML全文浏览量: 189
- PDF下载量: 513
- 被引次数: 0
下载:
