汽油机进气歧管流通性和均匀性数值模拟

姬芬竹; 谷可帅

汽油机进气歧管流通性和均匀性数值模拟

北京航空航天大学交通科学与工程学院, 北京 100191

详细信息

中图分类号: TK412
计量
- 文章访问数: 1526
- HTML全文浏览量: 214
- PDF下载量: 584
- 被引次数: 0
出版历程
- 收稿日期: 2013-04-27
- 网络出版日期: 2014-02-20

Numerical simulation of liquidity and uniformity of gasoline engine intake manifold

School of Transportation Science and Engineering, Beijing University of Aeronautics and Astronautics,Beijing 100191, China

摘要

摘要: 进气歧管的流通性和均匀性对发动机性能产生重要影响.建立了某四缸汽油发动机的GT-power仿真模型，对进气歧管的气体流速进行了仿真计算；利用STAR-CD软件模拟计算了进气歧管不同进气角度时各支管内的气体压力和流速分布，分析了各支管的进气均匀性和充气系数.计算和分析结果表明，通过改变进气口方向和稳压腔容积等几何参数，可以提高进气歧管的气体流通性，改善进气歧管各支管内气体流动质量，使各支管内气体流量趋于均匀.计算结果为该进气歧管的改性设计提供了理论依据.
- 进气歧管 /
- GT-power /
- STAR-CD /
- 流通性 /
- 均匀性
Abstract: The liquidity and uniformity of intake manifold have a major impact on engine performance. A four-cylinder gasoline engine model was created by GT-power and the gas flow rate of intake manifold was simulated. Gas pressure and velocity distribution were showed in different inlet angles though STAR-CD and the intake uniformity and inflatable coefficient were analyzed in each of the branched pipe. The results show that the gas liquidity and the gas flow quality in branched pipe were improved by changing the air inlet direction and regulator chamber volume and other geometric parameters, which made the gas flow tended to be uniform in each pipe. The calculation results provide a theoretical basis for designing the intake manifold modified.
- intake manifold /
- GT-power /
- STAR-CD /
- liquidity /
- uniformity

HTML全文

参考文献(13)

[1]	黄泽好, 杨超, 黄一桃, 等.发动机进气歧管流场的数值分析[J].机械设计与制造, 2012(2):156-158 Huang Zehao, Yang Chao, Huang Yitao, et al.Numerical simulation on flow field of engine intake manifold[J].Machinery Design & Manufacture, 2012(2):156-158(in Chinese)
[2]	朱茂强, 钟翔波.小排量汽油机进气歧管CFD优化设计与试验[J].汽车工程师, 2011(9):25-28 Zhu Maoqiang, Zhong Xiangbo.Design optimization and experiment of intake manifold of mall-displacement engine based on CFD[J].Auto Engineer, 2011(9):25-28(in Chinese)
[3]	杜巍, 李向荣, 马维忍．内燃机进气流动数值计算中三维几何建模问题的探讨[J]．小型内燃机与摩托车, 2006, 35(3): 20-22 Du Wei, Li Xiangrong, Ma Weiren.Discussion on the three-dimension modeling about computation for intake flow of IC engine[J].Small Internal Combustion Engine and Motorcycle, 2006, 35(3): 20-22(in Chinese)
[4]	罗马吉, 黄震, 蒋炎坤, 等.内燃机进气过程多维数值模拟的研究[J]．车用发动机, 2003(5):11-16 Luo Maji, Huang Zhen, Jiang Yankun, et al.Study on multi-dimensional numeri-cal simulation for intake process in internal combustion eng-ines[J].Vehicle Engine, 2003(5):11-16(in Chinese)
[5]	胡景彦, 苏圣, 洪进.某缸内直喷发动机进气歧管CFD模拟分析[J].农业装备与车辆工程, 2012, 50(6):20-23 Hu Jingyan, Sun Sheng, Hong Jin.CFD simulation analysis of a GDI engine intake manifold[J].Agricultural Equipment & Vehicle Engineering, 2012, 50(6):20-23(in Chinese)
[6]	牛玲, 徐崴, 白敏丽.某发动机进气歧管改型设计的CFD计算[J].辽宁工程技术大学学报, 2011, 30(1):126-130 Niu Ling, Xu Wei, Bai Minli.CFD calculation of designing for a engine intake manifold[J].Journal of Liaoning Technical University, 2011, 30(1):126-130(in Chinese)
[7]	王宏大, 王军.某型进气歧管CFD计算仿真[J].内燃机, 2011(9):25-28 Wang Hongda, Wang Jun.Calculation simulation of certain intake manifold[J].Internal Combustion Engines, 2011(9):25-28(in Chinese)
[8]	Ceviz M, Akim M.Design of a new SI engine intake manifold with variable length plenum[J].Energy Conversion and Management, 2010(11):2239-2244
[9]	David C, Pascal C.Fluid dynamic modeling of junctions internal combustion engine inlet and exhaust systems[J].Journal of Thermal Science, 2010(19):410-418
[10]	Mohamed A, Gueorgui K, Mohamed S.Influence of intake manifold design on in-cylinder flow and engine performances in a bus diesel engine converted to LPG gas fuelled, using CFD analyses and experimental investigations[J].Energy, 2011(5):2701-2715
[11]	Anja T, Gareth F, Chris M.A CFD study of fuel evaporation and related thermo-fluid dynamics in the inlet manifold, port and cylinder of the CFR octane engine[J].SAE International Journal of Fuels and Lubricants, 2012(3):1264-1276
[12]	Lang A, Ellinghaus K.Using CFD to calculate transient thermal load on exhaust manifolds[J].MTZ Worldwide, 2004(5):16-18
[13]	Naeimi Hessamedin, Domiry Ganji Davood, Gorji Mofid.A parametric design of compact exhaust manifold junction in heavy duty diesel engine using CFD[J].Thermal Science, 2011(4):1023-1033