Improving dorsal S-shaped inlet performance by vortex flow control
-
摘要: 通过在已有的S形进气道入口第一弯底部布置一系列类机翼的导流叶片,来改善出口流场分布,抑制旋流,减小出口畸变指数.分析了导流叶片的高度、弦长、攻角和安装位置(轴向位置和横向位置)这几个参数对S形进气道内流的影响,并利用计算流体力学(CFD)方法针对导流叶片的组数展开研究,得到最优结果.结果表明,采用优化后的导流叶片,可以有效抑制内流分离,降低S形进气道出口畸变指数,改善流场品质. 这些分析结果对于涡流发生器的设计有一定的指导意义.Abstract: In order to effectively reduce flow distortion produced in the S-shaped inlet, a computational fluid dynamics (CFD) procedure was used to design vortex generator installations near the entry of the diffuser. Several parameters, i.e. the ratio of generator blade height to local boundary layer thickness, the locating position, angle against the centerline, that characterize the vortex generator array were discussed to determine their effects. Especially the numbers of blades were varied to minimize total pressure distortion by restructuring the development of secondary flow. The results show that by using a properly designed vortex generator array total pressure distortion can be greatly reduced and flow separation can be totally prevented, the vortex generator with 8 pairs of blades reduced the circumferential distortion from 0.11 to 0.09. These results should provide valuable guidance in designing vortex generator installations in the S-shaped inlet.
-
Key words:
- ducts /
- flow control /
- computational fluid dynamics /
- unmenned vehicles
-
[1] Owens L R, Allan B G, Gorton S A. Boundary-layer-ingesting inlet flow control . AIAA-2006-839, 2006 [2] Anderson B H, Keller D. A robust design methodology for optimal micro-scale secondary flow control in compact inlet diffusers . AIAA-2002-0541,2002 [3] Allan B G, Yao C S, Lin J C. Numerical simulations of vortex generator vanes and jets on a flat plate . AIAA-2002-3160,2006 [4] Reichert B A, Wendt B J. Improving diffusing S-duct performance by secondary flow control . AIAA-94-0365,1994 [5] 郭荣伟,梁德旺,陈贻忠. 进口导流叶片对S弯进气道出口旋流的抑制研究[J].空气动力学学报, 1996,14(2):141-146 Guo Rongwei, Liang Dewang, Chen Yizhong. Investigation of swirl control in a diffusing S-shaped inlet with a horizontal guiding fence[J]. Acta Aerodynamic Sinica,1996,14(2):141-146(in Chinese) [6] 李大伟,张云飞,马东立.背负式S形进气道设计及数值分析[J].推进技术,2006,27(1):61-65 Li Dawei,Zhang Yunfei,Ma Dongli. Design and numerical investigation of dorsal S-shaped inlet[J]. Journal of Propulsion Technology,2006,27(1):61-65 (in Chinese) [7] Anderson B H, Gibb J. Application of computational fluid dynamics to the study of vortex flow control for the management of inlet distortion . AIAA-92-3177,1992
点击查看大图
计量
- 文章访问数: 3519
- HTML全文浏览量: 98
- PDF下载量: 1048
- 被引次数: 0