Experimental analysis of minimal quantity lubrication in milling high-strength steel
-
摘要: 为了验证微量润滑技术对刀具磨损及工件表面粗糙度的影响,研制出一套微量润滑系统,利用压缩气体流经的截面变小所产生的压强差来吸取箱体中的液体,并传输到喷嘴进行雾化.将其应用在高强度钢铣削加工中.试验结果表明:相对于干切削和传统浇注冷却,微量润滑技术具有明显的优势,它可有效地减小刀具磨损,并将工件表面粗糙度控制在较低的水平,尤其在高转速、大切深、快进给加工中,同时其还具有结构简单、冷却液用量小、对环境污染小等优点.对试验结果进行了初步分析.
-
关键词:
- 微量润滑技术 /
- 刀具磨损及工件表面粗糙度 /
- 高强度钢 /
- 铣削加工
Abstract: In order to validate the influences that MQL(minimal quantity lubrication)brings to the tool wear and surface roughness, a MQL system was developed. It used the difference of pressure that caused by the compressed air flow through the decrescent areas to imbibe the cooling fluid in the box, and transported it to the nozzle for atomizing. The application in milling high-strength steel was also investigated. The experiment indicates that MQL has obvious predominance compared with dry and traditional cooling method, it can efficiently reduce the tool wear and keep the surface roughness at a low level, especially in the machining of high spindle rotating speed,big depth of cut and fast feed rate. It also has the characteristics such as the simple structure, the less dosage of cooling fluid and the less pollution to the environment. The experimental results were analyzed elementarily. -
[1] 徐少红．高强度钢和超高强度钢的切削加工[J]．装备制造技术,2007(2):72-73 Xu Shaohong．Cutting process of high strength steel and super-high strength steel[J]．Equipment Manufacturing Technology,2007(2):72-73 (in Chinese) [2] 王爱玲,魏源迁,赵跃文,等． 油膜附水滴加工液的物理特性与加工性能[J]．金刚石与磨料磨具工程,2004(1):5-9 Wang Ailing,Wei Yuanqian,Zhao Yuewen,et al．Physical characteristics and machining performances of the machining fluids of oils on water[J]. Diamond & Abrasives Engineering,2004(1):5-9(in Chinese) [3] 魏源迁,王新华,王爱玲,等．论生态加工液与零排放生产[J]．金刚石与磨料磨具工程,2004(3):23-27 Wei Yuanqian,Wang Xinhua,Wang Ailing,et al．Discussion about eco-machining fluids and zero-emission production[J]. Diamond & Abrasives Engineering,2004(3):23-27(in Chinese) [4] Sreejith P S,Ngoi B K A．Dry machining:machining of the future [J]．Journal of Materials Processing Technology,2000,101:287-291 [5] Weinert K,Inasaki I,Sutherland J W,et al． Dry machining and minimum quantity lubrication[J]．CIRP Annals-Manufacturing Technology,2004,53(2):511-537 [6] 张自卫．切削液的使用现状及相关问题[J]．磨床与磨削,1984(2):29-30 Zhang Ziwei,Using actuality of cutting fluids and correlative problems[J]．Grinder And Grinding,1984(2):29-30(in Chinese) [7] 曹玉璋．传热学[M]．北京:北京航空航天大学出版社,2001:135-142 Cao Yuzhang．Heat transfer[M]．Beijing:Beihang University Press,2001:135-142(in Chinese) -
点击查看大图
计量
- 文章访问数: 3013
- HTML全文浏览量: 137
- PDF下载量: 1173
- 被引次数: 0
下载:
