Effect of temperature shock on transmission properties of frequency selective surfaces
-
摘要: 根据国家军用标准GJB 150-86对不同涂层材料和加工工艺的频率选择表面(FSS,Frequency Selective Surfaces)进行了温度循环的环境模拟试验,通过比较温度循环前后FSS的谐振频率、传输损耗、频带宽度和入射角稳定性等传输特性的差异,考察FSS在温度循环条件下的性能稳定性.结果表明,温度循环对不同材料和工艺的FSS的传输性能有较大影响,主要表现在FSS的传输损耗和频带宽度两方面.不同FSS在经过温度循环后,谐振频率下的传输损耗增大0.5~3倍,入射角越大增大的幅度越大;频带宽度增加50%~70%,不同的FSS增加的幅度不同.而对谐振频率和入射角稳定性的影响根据不同的FSS而不同,但对二者的影响都不明显.与简单振子FSS相比,组合振子FSS的传输性能受温度循环的影响较大.Abstract: Temperature shock test followed the criterion of GJB 150-86 was completed for frequency selective surfaces (FSS) of different coatings and different machining process. The stability of transmission properties of FSS under temperature shock test was studied by the difference before and after the test on resonant frequency, transmission loss, band width and sensitivities to the varying angles of incidence of FSS. The results are shown as follows. It has great influence of temperature shock test on the transmission properties of FSS, which mainly displays in two sides, transmission loss and band width. After the temperature shock test, transmission loss of FSS increases by 50%~300% for different coating and machining process FSS and the increase extent becomes greater with the increase of the incidence angle. The band width increases by 50%~70% for different FSS. The temperature shock has little effect on the resonant frequency and sensitivities to the varying angles of incidence and it has different influence for different FSS. In contrast with simple cell FSS, the transmission properties of compound cell FSS have more obviously change after temperature shock.
-
[1] Munk B A. Frequency selective surfaces:theory and design[M]. NewYork:John Wiley, 2000 [2] 王焕青,吕明云,武哲. 介质加载对频率选择表面传输特性影响的实验研究[J]. 红外与毫米波学报,2005,24(1):27-30 Wang Huanqing, Lü Mingyun, Wu Zhe. Experiment on the influence of dielectric loading on transmission properties of frequency selective surfaces [J]. J Infrared Millim Waves,2005,24(1):27-30(in Chinese) [3] 吕明云,王焕青,武哲. 工艺参数对频率选择表面传输特性试验研究[J]. 北京航空航天大学学报,2006,32(6):713-715 Lü Mingyun, Wang Huanqing, Wu Zhe. Experiment on influence of machining on transmission properties of frequency selective surfaces[J]. Journal of Beijing University of Aeronautics and Astronautics,2006,32(6):713-715(in Chinese) [4] 王焕青,吕明云,武哲. FSS对TE极化波传输特性的实验研究[J]. 电子学报,2005,33(6):1099-1101 Wang Huanqing, Lü Mingyun, Wu Zhe. Experiment on transmission properties of TE-polarized plane wave incidence on frequency selective surfaces[J]. Acta Electronica Sinica,2005,33(6):1099-1101(in Chinese) [5] 侯新宇,万伟,佟明安,等.带有多层介质衬底FSS的损耗和带宽特性分析[J].微波学报,1999,15(4):366-370 Hou Xinyu, Wan Wei, Tong Ming’an, et al. Analysis on the loss and bandwidth properties of FSS with multi-layer dielectric substrates[J]. Journal of Microwave,1999,15(4):366-370(in Chinese) [6] 冯林,阮颖铮.介质层中频率选择表面特性分析[J].航空学报,1994, 15(9):1122-1125 Feng Lin, Ruan Yingzheng. Analysis of FSS sandwiched in a dielectric sheet [J]. Acta Aeronautica et Asronautica Sinica,1994,15(9):1122-1125(in Chinese) [7] 吕明云,祝明,王焕青,等. 复杂空间曲面FSS加工系统研究[J]. 航空学报, 2005, 26(4):524-527 Lü Mingyun, Zhu Ming, Wang Huanqing. et al. Digital machining system of complex curved-surface FSS [J]. Acta Aeronautica et Asronautica Sinica, 2005,26(4):524-527(in Chinese) [8] 宋文波. 雷达舱罩FSS结构用复合导电涂层的研究 . 北京:北京航空航天大学材料科学与工程学院, 2005 Song Wenbo. Study on composite conductive coatings to be applied to FSS of Radome . Beijing:School of Materials Science and Engineering,Beijing University of Aeronautics and Astronautics,2005(in Chinese)
点击查看大图
计量
- 文章访问数: 2592
- HTML全文浏览量: 29
- PDF下载量: 1042
- 被引次数: 0