合成射流控制NACA0015翼型大攻角流动分离

张攀峰; 王晋军

合成射流控制NACA0015翼型大攻角流动分离

北京航空航天大学航空科学与工程学院, 北京 100083

基金项目: 总装气动预研资助项目; 国家自然科学基金资助项目(10602007); 航空科技创新基金资助项目(07A51001)

详细信息

作者简介:
张攀峰(1978- ),湖北武汉人,副教授,pfzhang@buaa.edu.cn.

中图分类号: O 357.4⁺1; V 211.41⁺2
计量
- 文章访问数: 3840
- HTML全文浏览量: 255
- PDF下载量: 1713
- 被引次数: 0
出版历程
- 收稿日期: 2007-04-06
- 网络出版日期: 2008-04-30

Numerical simulation on flow control of stalled NACA0015 airfoil with synthetic jet actuator in recirculation region

School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

摘要

摘要: 为了研究合成射流激励器处于NACA0015翼型回流区时对其分离流动的控制,采用商用计算流体力学软件Fluent 6.1求解Reynolds平均Navier-Stokes方程,通过对翼型气动力特性、脱落漩涡结构以及射流孔口附近流动结构的分析,揭示了合成射流处于分离区时对边界层控制的机理.结果表明:当合成射流孔口处于回流区时仍可有效推迟翼面边界层分离点,缩小回流区范围,从而有效提高翼型的升力.当射流方向垂直于壁面,无量纲频率以及吹气速度比都等于1时,翼型平均升力系数提高40%左右.
- 失速 /
- 分离流动 /
- 合成射流 /
- 流动控制
Abstract: Numerical simulation on the separation flow control of stalled NACA0015 airfoil at high angle of attack (20°) was carried out with synthetic jet actuator in the recirculation region. The Reynolds averaged Navier-Stocks equations were solved by commercial computational fluid dynamic software package Fluent6.1. The mechanism of flow separation control with the synthetic jet actuator in the recirculation region was also discussed by analyzing the vortex structure separated from the airfoil and the flow field near the actuator orifice. When the synthetic jet actuator is in the recirculation region of the airfoil, the separation point on the suction side of the airfoil can be delayed and the recirculation region can be decreased, which result in the lift enhancement of the airfoil. When the jet orientation is perpendicular to the airfoil wall with the normalized actuator frequency and the jet velocity ratio setting as 1, the lift of the airfoil is increased by about 40%.
- stall /
- separation flow /
- synthetic jet /
- flow control

HTML全文

参考文献(1)

[1] Wiltse J, Glezer A. Manipulation of free shear flows using piezoelectric actuators [J]. J of Fluid Mechanics, 1993, 249(4):261-285 [2] Duvigneau R, Visonneau M. Optimization of a synthetic jet actuator for aerodynamic stall control [J]. Computers and Fluids,2006, 35(6):624-638 [3] Zdenek T, Vaclav T. Annular synthetic jet used for impinging flow mass transfer [J]. International Journal of Hear and Mass Transfer, 2003, 46(17):3291-3297 [4] 刘艳明, 伍耐明, 董金钟,等. 合成射流作用机理及其对共轴射流掺混的影响[J]. 北京航空航天大学学报, 2007, 33(1):5-9 Liu Yanming ,Wu Naiming ,Dong Jinzhong,et al. Process mechanism of synthetic jet and its effect on the mixing in coaxial jets [J]. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(1):5-9(in Chinese) [5] 王晋军,冯立好,徐超军.合成射流控制圆柱分离及绕流结构的实验研究[J].中国科学E辑,2007, 37(7):944-951 Wang Jinjun, Feng Lihao, Xu Chaojun. Experimental study on the separation flow control of the circular cylinder by synthetic jet actuator [J]. Science in China Series E, 2007, 37(7):944-951(in Chinese) [6] Guo D H, Cary A W, Agarwal R K. Numerical simulation of vectoring of a primary jet with a synthetic jet[J]. AIAA Journal, 2003, 41(12):2364-2370 [7] Washburn A E, Amitay M. Active flow control on the stingray UAV:physical mechanisms . AIAA Paper 2004-0745,2004 [8] Shaw L, Smith B, Saddoughi S. Full scale flight demonstration of active flow control of a pod wake . AIAA Paper 2006-3183,2006 [9] Amitay M, Horvath M, Michaux M,et al. Virtual Aerodynamic shape modification at low angles of attack using synthetic jet actuators . AIAA Paper 2001-2957,2001 [10] Mittal R, Rampunggoon P. On the virtual aero shaping effect of synthetic jet[J]. Physics Fluids, 2002 14(4):1533-1536 [11] Zhang Panfeng, Wang Jinjun. Novel signal wavepattern for efficient synthetic jet generation [J]. AIAA Journal, 2007,45(5):1058-1065

施引文献

资源附件(0)

访问统计