Wing-s optimization design using serial and parallel computations based on N-S equations
-
摘要: 对典型的大展弦比和中等展弦比机翼在0.7~0.9马赫数区间进行了串行和并行计算的数值校验,证实了以N-S (Navier-Stokes)方程为主控方程的串行和并行流场求解器的正确性,并讨论了并行效率和加速比.结合Powell算法,讨论了在确定的机翼平面形状和翼型的条件下,以升阻比最大为目标的三维机翼截面翼型最大厚度与扭角的优化设计.算例结果表明,厚度的非线性分布和负的扭角会改善机翼流场的流动状态,使机翼的升阻比得到提高,优化设计方法是可行的.Abstract: The serial and parallel flow field solution program was validated at two Mach numbers between 0.7 and 0.9 using both a high and a moderate aspect ratio wings. The result based on the Navier-Stokes(N-S) equations proved it right and the parallel efficiency as well as speed-up ratio was discussed. With the goal of maximizing lift-to-drag ratio, the optimization of three-dimensional wing-s section thickness and twist angle was discussed. N-S equations as flow field sovler and Powell method were used as design tools, and the wing-s aspect shape was fixed. The subcritical parallel computation case and supercritical serial computation case demonstrated that nonlinear distribution of thickness and negative twist angle could ameliorate the condition of flow field around the wing, which lead to a higher lift-to-drag ratio. The optimization method is effective.
-
Key words:
- optimization design /
- wing design /
- navier-stokes equations /
- parallel computation
-
[1] Van der Velden A, Forbrich D. Use of aerodynamic shape optimization for a large transonic aircraft . AIAA 97-2274,1997 [2] Van der Velden A, Von Reith D. Multi-disciplinary SCT design at deutsche aerospace airbus Proceedings of the 7th European Aerospace conference. Toulouse: ,1994 [3] Takahashi T T, Coopersmith R M. Wing section design for a long-range hydrofoil transport . AIAA 2002-0832,2002 [4] Sobieczky H. New design concept for high speed air transports Sobieczky H. CISM Cours and Lectures No. 366. New York:Springer Wien,1997 [5] 朱自强,吴宗成.现代飞机设计空气动力学[M].北京:北京航空航天大学出版社,2005 Zhu Ziqiang, Wu Zongcheng. Aerodynamics for modern aircraft design[M]. Beijing:Beijing University of Aeronautics and Astronautics Press,2005(in Chinese) [6] Lion M S. Progress towards an improved CFD method: AUSM+ . AIAA, 95-1701,1995 [7] 李岩,朱自强,王晓璐,等.基于Euler方程的三维机翼厚度与扭角优化设计[J].北京航空航天大学学报,2007,33(3):269-272 Li Yan, Zhu Ziqiang, Wang Xiaolu, et al. Optimization design of wing’s thickness and twist angle using Euler equations[J]. Journal of Beijing University of Aeronautics and Astronautics, 2007,33(3):269-272(in Chinese) [8] Burdges K P, Hinson B L. Transport wing and far field test data on a high aspect ratio wing for three dimensional computational method evaluation . AGARD-AR-138,1979 [9] Burdges K P, Hinson B L. Transport wing and far field test data on a moderate aspect ratio wing for three dimensional computational method evaluation . AGARD-AR-138,1979 -
点击查看大图
计量
- 文章访问数: 3970
- HTML全文浏览量: 161
- PDF下载量: 1415
- 被引次数: 0
下载:
